SearcharxivSearch

arXiv · 2202.11993

Redundant apodization for direct imaging of exoplanets I: Robustness to primary mirror segmentation-induced errors outside the segment diffraction limit

Abstract

Direct imaging and spectroscopy of Earth-like planets and young Jupiters require contrasts up to 10^6-10^10 at angular separations of a few dozen milliarcseconds. To achieve this goal, one of the most promising approaches consists of using large segmented primary mirror telescopes with coronagraphic instruments. However, coronagraphs are highly sensitive to wavefront errors. The segmentation itself is responsible for phasing errors and segment vibrations to be controlled at a subnanometric accuracy. We propose an innovative method for a coronagraph design that allows a consequent relaxation of the segment phasing constraints for low segment-count mirrors and generates an instrument that is more robust to segment-level wavefront errors. It is based on an optimization of the coronagraph that includes a segment-level apodization. This is repeated over the pupil to match the segmentation redundancy and improves the contrast stability beyond the minimum separation set by the single-segment diffraction limit. We validate this method on a GMT-like pupil for two coronagraph types: apodized pupil Lyot coronagraphs (APLC) and apodizing phase plate coronagraphs (APP). For the APLC, redundant apodization enables releasing the piston phasing constraints by a factor of 5 to 20 compared to classical designs. For the APP, the contrast remains almost constant up to 1 radian RMS of the phasing errors. We also show that redundant apodizations increase the robustness of the coronagraph to segment tip-tilt errors, as well as to missing segments. This method cannot be applied to higher-segment count mirrors such as the ELT or the TMT, but it is particularly suitable for low segment-count mirrors (fewer than 20 segments) such as the GMT aperture. These mirrors aim for high-contrast imaging of debris disks or exoplanets down to 100 mas.

Explore related subjects

Keep this discovery

BibTeXRIS

Lucie Leboulleux, Alexis Carlotti, Mamadou N'Diaye. 2022-02-24. Redundant apodization for direct imaging of exoplanets I: Robustness to primary mirror segmentation-induced errors outside the segment diffraction limit. https://doi.org/10.1051/0004-6361%2F202142410

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM