Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2207.03900

An investigation of Hertzian contact in soft materials using photoelastic tomography

Benjamin Mitchell·Yuto Yokoyama·Ali Nassiri·Yoshiyuki Tagawa·Yannis Korkolis·Brad Kinsey
View original source ↗Read source document ↗Export metadata ↓

Abstract

Hertzian contact of a rigid sphere and a highly deformable soft solid is investigated using integrated photoelasticity. The experiments are performed by pressing a styrene sphere of 15 mm diameter against a 44 x 44 x 47 mm$^3$ cuboid made of 5% wt. gelatin, inside a circular polariscope, and with a range of forces. The emerging light rays are processed by considering that the retardation of each ray carries the cumulative effect of traversing the contact-induced axisymmetric stress field. Then, assuming Hertzian theory is valid, the retardation is analytically calculated for each ray and compared to the experimental one. Furthermore, a finite element model of the process introduces the effect of finite displacements and strains. Beyond the qualitative comparison of the retardation fields, the experimental, theoretical, and numerical results are quantitatively compared in terms of the maximum equivalent stress, surface displacement, and contact radius dimensions. A favorable agreement is found at lower force levels, where the assumptions of Hertz theory hold, whereas deviations are observed at higher force levels. A major discovery of this work is that at the maximum equivalent stress location, all three components of principal stress can be determined experimentally, and show satisfactory agreement with theoretical and numerical ones in our measurement range. This provides valuable insight into Hertzian contact problems since the maximum equivalent stress controls the initiation of plastic deformation or failure. The measured displacement and contact radii also reasonably agree with the theoretical and numerical ones. Finally, the limitations that arise due to the linearization of this problem are explored.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

BibTeXRIS

Benjamin Mitchell, Yuto Yokoyama, Ali Nassiri, Yoshiyuki Tagawa, Yannis Korkolis, Brad Kinsey. 2022-07-08. An investigation of Hertzian contact in soft materials using photoelastic tomography. https://doi.org/10.1016/j.jmps.2022.105164

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗