SearcharxivSearch

arXiv · 2301.12724

The LOFAR LBA Sky Survey II. First data release

Abstract

The Low Frequency Array (LOFAR) is the only existing radio interferometer able to observe at ultra-low frequencies (<100 MHz) with high resolution (<15") and high sensitivity (<1 mJy/beam). To exploit these capabilities, the LOFAR Surveys Key Science Project is using the LOFAR Low Band Antenna (LBA) to carry out a sensitive wide-area survey at 41-66 MHz named the LOFAR LBA Sky Survey (LoLSS). LoLSS is covering the whole northern sky above declination 24 deg with a resolution of 15" and a sensitivity of 1-2 mJy/beam (1 sigma) depending on declination, field properties, and observing conditions. Here we present the first data release. An automated pipeline was used to reduce the 95 fields included in this data release. The data reduction procedures developed for this project have general application and are currently being used to process LOFAR LBA interferometric observations. Compared to the preliminary release, direction-dependent errors have been corrected for during the calibration process. This results in a typical sensitivity of 1.55 mJy/beam at the target resolution of 15". The first data release of the LOFAR LBA Sky Survey covers 650 sqdeg in the HETDEX spring field. The resultant data products released to the community include mosaic images (I and V Stokes) of the region, and a catalogue of 42463 detected sources and related Gaussian components used to describe sources' morphologies. Separate catalogues for 6 in-band frequencies are also released. The first data release of LoLSS shows that, despite the influences of the ionosphere, LOFAR can conduct large-scale surveys in the frequency window 42-66 MHz with unprecedentedly high sensitivity and resolution. The data can be used to derive unique information on the low-frequency spectral properties of many thousands of sources with a wide range of applications in extragalactic and galactic astronomy.

Explore related subjects

Keep this discovery

BibTeXRIS

F. de Gasperin, H. W. Edler, W. L. Williams, J. R. Callingham, B. Asabere, M. Bruggen, G. Brunetti, T. J. Dijkema, M. J. Hardcastle, M. Iacobelli, A. Offringa, M. J. Norden, H. J. A. Rottgering, T. Shimwell, R. J. van Weeren, C. Tasse, D. J. Bomans, A. Bonafede, A. Botteon, R. Cassano, K. T. Chyzy, V. Cuciti, K. L. Emig, M. Kadler, G. Miley, B. Mingo, M. S. S. L. Oei, I. Prandoni, D. J. Schwarz, P. Zarka. 2023-01-30. The LOFAR LBA Sky Survey II. First data release. https://doi.org/10.1051/0004-6361%2F202245389

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM