SearcharxivSearch

arXiv · 2304.05191

Multicolor and multi-spot observations of Starlink's Visorsat

Abstract

This study provides the results of simultaneous multicolor observations for the first Visorsat (STARLINK-1436) and the ordinary Starlink satellite, STARLINK-1113 in the $U$, $B$, $V$, $g'$, $r$, $i$, $R_{\rm C}$, $I_{\rm C}$, $z$, $J$, $H$, and $K_s$ bands to quantitatively investigate the extent to which Visorsat reduces its reflected light. Our results are as follows: (1) in most cases, Virorsat is fainter than STARLINK-1113, and the sunshade on Visorsat, therefore, contributes to the reduction of the reflected sunlight; (2) the magnitude at 550 km altitude (normalized magnitude) of both satellites often reaches the naked-eye limiting magnitude ($<$ 6.0); (3) from a blackbody radiation model of the reflected flux, the peak of the reflected components of both satellites is around the $z$ band; and (4) the albedo of the near infrared range is larger than that of the optical range. Under the assumption that Visorsat and STARLINK-1113 have the same reflectivity, we estimate the covering factor, $C_{\rm f}$, of the sunshade on Visorsat, using the blackbody radiation model: the covering factor ranges from $0.18 \leq C_{\rm f} \leq 0.92$. From the multivariable analysis of the solar phase angle (Sun-target-observer), the normalized magnitude, and the covering factor, the phase angle versus covering factor distribution presents a moderate anti-correlation between them, suggesting that the magnitudes of Visorsat depend not only on the phase angle but also on the orientation of the sunshade along our line of sight. However, the impact on astronomical observations from Visorsat-designed satellites remains serious. Thus, new countermeasures are necessary for the Starlink satellites to further reduce reflected sunlight.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Takashi Horiuchi, Hidekazu Hanayama, Masatoshi Ohishi, Tatsuya Nakaoka, Ryo Imazawa, Koji S. Kawabata, Jun Takahashi, Hiroki Onozato, Tomoki Saito, Masayuki Yamanaka, Daisaku Nogami, Yusuke Tampo, Naoto Kojiguchi, Jumpei Ito, Masaaki Shibata, Malte Schramm, Yumiko Oasa, Takahiro Kanai, Kohei Oide, Katsuhiro L. Murata, Ryohei Hosokawa, Yutaka Takamatsu, Yuri Imai, Naohiro Ito, Masafumi Niwano, Seiko Takagi, Tatsuharu Ono, Vladimir V. Kouprianov. 2023-04-11. Multicolor and multi-spot observations of Starlink's Visorsat. https://doi.org/10.1093/pasj%2Fpsad021

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM