Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2304.12924

Evolution of ferroelectricity with annealing temperature and thickness in sputter deposited undoped HfO$_2$ on silicon

Md Hanif Ali·Adityanarayan Pandey·Rowtu Srinu·Paritosh Meihar·Shubham Patil·Sandip Lashkare·Udayan Ganguly
View original source ↗Read source document ↗Export metadata ↓

Abstract

Ferroelectricity in sputtered undoped-HfO$_2$ is attractive for composition control for low power and non-volatile memory and logic applications. Unlike doped HfO$_2$, evolution of ferroelectricity with annealing and film thickness effect in sputter deposited undoped HfO$_2$ on Si is not yet reported. In present study, we have demonstrated the impact of post metallization annealing temperature and film thickness on ferroelectric properties in dopant-free sputtered HfO$_2$ on Si-substrate. A rich correlation of polarization with phase, lattice constant, and crystallite size and interface reaction is observed. First, anneal temperature shows o-phase saturation beyond 600 oC followed by interface reaction beyond 700 oC to show an optimal temperature window on 600-700 oC. Second, thickness study at the optimal temperature window shows an alluring o-phase crystallite scaling with thickness till a critical thickness of 20 nm indicating that the films are completely o-phase. However, the lattice constants (volume) are high in the 15-20 nm thickness range which correlates with the enhanced value of 2Pr. Beyond 20 nm, crystallite scaling with thickness saturates with the correlated appearance of m-phase and reduction in 2Pr. The optimal thickness-temperature window range of 15-20 nm films annealed at 600-700 oC show 2Pr of ~35.5 micro-C/cm$^2$ is comparable to state-of-the-art. The robust wakeup-free endurance of ~$10^$8 cycles showcased in the promising temperature-thickness window has been identified systematically for non-volatile memory applications.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

BibTeXRIS

Md Hanif Ali, Adityanarayan Pandey, Rowtu Srinu, Paritosh Meihar, Shubham Patil, Sandip Lashkare, Udayan Ganguly. 2023-04-25. Evolution of ferroelectricity with annealing temperature and thickness in sputter deposited undoped HfO$_2$ on silicon. https://arxiv.org/abs/2304.12924

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗