Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2307.07270

Characterizing current noise of commercial constant-current sources by using of an optically-pumped rubidium atomic magnetometer

Ni Zhao·Lulu Zhang·Yongbiao Yang·Jun He·Yanhua Wang·Tingyu Li·Junmin Wang
View original source ↗Read source document ↗Export metadata ↓

Abstract

This paper introduces a method for characterizing the current noise of commercial constant-current sources(CCSs) using a free-induction-decay(FID) type optically-pumped rubidium atomic magnetometer driven by a radio-frequency(RF) magnetic field. We convert the sensitivity of the atomic magnetometer into the current noise of CCS by calibrating the coil constant. At the same time, the current noise characteristics of six typical commercial low-noise CCSs are compared. The current noise level of the KeySight Model B2961A is the lowest among the six tested CCSs, which is 36.233 0.022 nA / Hz1/2 at 1-25 Hz and 133.905 0.080 nA / Hz1/2 at 1-100 Hz respectively. The sensitivity of atomic magnetometer is dependent on the current noise level of the CCS. The CCS with low noise is of great significance for high-sensitivity atomic magnetometer. The research provides an important reference for promoting the development of high precision CCS, metrology and basic physics research.

Explore related subjects

physics.atom-ph

Keep this discovery

BibTeXRIS

Ni Zhao, Lulu Zhang, Yongbiao Yang, Jun He, Yanhua Wang, Tingyu Li, Junmin Wang. 2023-07-14. Characterizing current noise of commercial constant-current sources by using of an optically-pumped rubidium atomic magnetometer. https://doi.org/10.1063/5.0159751

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Delay-engineered dynamical phases in a programmable non-Markovian spin oscillator

Non-Markovian dynamics offer a new route towards engineering non-equilibrium matter, where memory and feedback act as programmable resources for controlling order in time. Here we report the realization of a non-Markovian spin oscillator in a hot vapour $^{129}$Xe-Cs co-magnetometer with programmable feedback delay and gain. By tuning these parameters, we observe a hierarchy of dynamical phases, including time-crystalline response, nonlinear bifurcations, and frequency-comb formation. The measured spectra and phase boundaries are captured by linear stability analysis of delayed Bloch equations, revealing these phenomena as different manifestations of the same memory-induced instability structure. These results establish time-delayed feedback as a powerful strategy for controlling non-equilibrium phases, enabling quantum sensing, frequency referencing, and synchronization within a single spin-based platform.

physics.atom-ph↗
arXiv2026

Non-stick vacuum wall collisions with a laser-coolable molecule

Molecular species that are suitable for direct laser cooling are typically considered lost or destroyed if they collide with an ambient temperature vacuum wall. Here, we study surface collisions with aluminum monofluoride (AlF), a laser-coolable molecule that survives this process with unusually high probability. We detect the outgoing AlF molecules from a single wall collision via Doppler-sensitive laser-induced fluorescence spectroscopy, using incoming supersonic (pulsed) and thermochemical (continuous) molecular beams. The angular, velocity and rovibrational level distributions of the outgoing molecules show near-complete thermalisation to the wall in a single collision event. We determine an upper limit to the surface residence time of about 5$~\mu$s, and by monitoring the decay in density of pulses of molecules loaded into a small storage volume, we deduce the surface sticking probability for different materials. For a siloxane-coated metallic surface, the sticking probability of AlF is about 0.015, allowing us to accumulate molecules from the thermochemical source into an ambient temperature storage vessel at densities near $10^{8}~$cm$^{-3}$. This provides a route to compact, portable traps for neutral molecules.

physics.atom-ph↗
arXiv2026

Kinetic modeling of molecular beam formation in a cryogenic buffer-gas cell

Cryogenic buffer-gas cells are widely used to produce cold molecular beams, but the microscopic dynamics governing beam formation remain challenging to model. Here we present fully kinetic simulations of a cryogenic buffer-gas cell using the Direct Simulation Monte Carlo method implemented in the PICLas framework, treating the buffer gas and ablated molecules within a single unified model. We capture characteristic features of cryogenic buffer-gas sources, including plume cooling, directed transport toward the aperture, and the formation of a slow molecular beam, while also resolving energy transfer from the hot ablation plume to the helium buffer gas that is inaccessible to existing approaches relying on the background-gas approximation. Our results demonstrate that fully kinetic simulations can provide detailed insights into buffer-gas cell dynamics and open a route toward a systematic optimization of such sources.

physics.atom-ph↗