Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2307.08216

Interference filter based external-cavity diode laser with combined dual interference filters and largely adjustable feedback range

Rui Chang·Jun He·Junmin Wang
View original source ↗Read source document ↗Export metadata ↓

Abstract

External-cavity diode lasers (ECDL) are widely used as light sources in laser spectroscopy, atomic physics, and quantum optics. This study demonstrated a home-made 852-nm ECDL with variable feedback, using the combined dual narrow-band interference filters (IFs) as the laser longitudinal mode selection element. The combination of narrow-band IFs, mainly for the current commercially available narrow-band IFs with the full width at half maximum (FWHM) of approximately 0.5 nm for 780-895 nm. We designed different narrow-band IFs combinations to achieve a narrower FWHM, and applied them in the ECDL. The combination of the dual narrow-band IFs further reduces the laser linewidth. We measured the laser linewidth using a high-finesse Fabry-Perot cavity with a linewidth of approximately 10 kHz. The laser linewidth is approximately 176 kHz for the Single-IF-ECDL and 96 kHz for the Dual-IF-ECDL with the same feedback. In addition, we have experimentally verified the results of narrower laser linewidth and larger tuning range with increase in the feedback. The developed Dual-IF-ECDL has the capability of narrow linewidth and wavelength tunability and can be applied to precision spectroscopy, cooling and trapping of neutral atoms.

Explore related subjects

physics.atom-phphysics.optics

Keep this discovery

BibTeXRIS

Rui Chang, Jun He, Junmin Wang. 2023-07-17. Interference filter based external-cavity diode laser with combined dual interference filters and largely adjustable feedback range. https://doi.org/10.1088/1402-4896%2Fad0943

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Delay-engineered dynamical phases in a programmable non-Markovian spin oscillator

Non-Markovian dynamics offer a new route towards engineering non-equilibrium matter, where memory and feedback act as programmable resources for controlling order in time. Here we report the realization of a non-Markovian spin oscillator in a hot vapour $^{129}$Xe-Cs co-magnetometer with programmable feedback delay and gain. By tuning these parameters, we observe a hierarchy of dynamical phases, including time-crystalline response, nonlinear bifurcations, and frequency-comb formation. The measured spectra and phase boundaries are captured by linear stability analysis of delayed Bloch equations, revealing these phenomena as different manifestations of the same memory-induced instability structure. These results establish time-delayed feedback as a powerful strategy for controlling non-equilibrium phases, enabling quantum sensing, frequency referencing, and synchronization within a single spin-based platform.

physics.atom-ph↗
arXiv2026

Non-stick vacuum wall collisions with a laser-coolable molecule

Molecular species that are suitable for direct laser cooling are typically considered lost or destroyed if they collide with an ambient temperature vacuum wall. Here, we study surface collisions with aluminum monofluoride (AlF), a laser-coolable molecule that survives this process with unusually high probability. We detect the outgoing AlF molecules from a single wall collision via Doppler-sensitive laser-induced fluorescence spectroscopy, using incoming supersonic (pulsed) and thermochemical (continuous) molecular beams. The angular, velocity and rovibrational level distributions of the outgoing molecules show near-complete thermalisation to the wall in a single collision event. We determine an upper limit to the surface residence time of about 5$~\mu$s, and by monitoring the decay in density of pulses of molecules loaded into a small storage volume, we deduce the surface sticking probability for different materials. For a siloxane-coated metallic surface, the sticking probability of AlF is about 0.015, allowing us to accumulate molecules from the thermochemical source into an ambient temperature storage vessel at densities near $10^{8}~$cm$^{-3}$. This provides a route to compact, portable traps for neutral molecules.

physics.atom-ph↗
arXiv2026

Kinetic modeling of molecular beam formation in a cryogenic buffer-gas cell

Cryogenic buffer-gas cells are widely used to produce cold molecular beams, but the microscopic dynamics governing beam formation remain challenging to model. Here we present fully kinetic simulations of a cryogenic buffer-gas cell using the Direct Simulation Monte Carlo method implemented in the PICLas framework, treating the buffer gas and ablated molecules within a single unified model. We capture characteristic features of cryogenic buffer-gas sources, including plume cooling, directed transport toward the aperture, and the formation of a slow molecular beam, while also resolving energy transfer from the hot ablation plume to the helium buffer gas that is inaccessible to existing approaches relying on the background-gas approximation. Our results demonstrate that fully kinetic simulations can provide detailed insights into buffer-gas cell dynamics and open a route toward a systematic optimization of such sources.

physics.atom-ph↗