Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2309.06356

A real-time hole depth diagnostic based on coherent imaging with plasma amendment during femtosecondlaser hole-drilling

Ping Xu·Yi Yu·Chijie Xiao·Ruijia Liu·Kang Zha·Lin Zhou·Yongtao Liu·Zhou Xu
View original source ↗Read source document ↗Export metadata ↓

Abstract

An in-process coherent imaging diagnostic has been developed to real-time measure the hole depth during air-film hole drilling by a femtosecond laser. A super-luminescent diode with a wavelength of 830~13 nm is chosen as the coherent light source which determines a depth resolution of 12 {\mu}m. The drilled hole is coupled as a part of the sample arm and the depth variation can be extracted from the length variation of the optical path. Interference is realized in the detection part and a code has been written to discriminate the interference fringes. Density of plasma in the hole is diagnosed to evaluate its amendment to the optical path length and the depth measurement error induced by plasma is non-ignorable when drilling deep holes.

Explore related subjects

physics.ins-det

Keep this discovery

BibTeXRIS

Ping Xu, Yi Yu, Chijie Xiao, Ruijia Liu, Kang Zha, Lin Zhou, Yongtao Liu, Zhou Xu. 2023-06-17. A real-time hole depth diagnostic based on coherent imaging with plasma amendment during femtosecondlaser hole-drilling. https://arxiv.org/abs/2309.06356

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det↗
arXiv2026

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det↗
arXiv2026

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det↗