Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2309.15672

Detection of intended and unintended emissions from Starlink satellites in the SKA-Low frequency range, at the SKA-Low site, with an SKA-Low station analog

Dylan Grigg·Steven Tingay·Marcin Sokolowski·Randall Wayth·Balthasar Indermuehle·Steve Prabu
View original source ↗Read source document ↗Export metadata ↓

Abstract

Intended and unintended radio emissions from satellites can interfere with sensitive radio telescopes in the frequency ranges of key experiments in astrophysics and cosmology. We detect strong intended and unintended electromagnetic radiation from Starlink satellites at the site of the future SKA-Low facility in Western Australia, using an SKA-low prototype station known as the Engineering Development Array version 2 (EDA2). We aim to show that Starlink satellites are easily detectable utilising a configuration of low frequency radio antennas representative of an SKA-Low 'station' and that our results complement similar findings with the LOFAR telescope. Utilising the EDA2 at frequencies of 137.5 MHz and 159.4 MHz, we detect trains of Starlink satellites on 2023-03-17/18 and 2021-11-16/17, respectively, via the formation of all-sky images with a frequency resolution of 0.926 MHz and a time resolution of 2 s. Time differencing techniques are utilised to isolate and characterise the transmissions from Starlink and other satellites. We observe Starlink satellites reaching intensities of $10^6$ Jy/beam, with the detected transmissions exhibiting a range of behaviours, from periodic bursts to steady transmission. The results are notable because they demonstrate that Starlink satellites are detected in the SKA-Low frequency range, transmitting both intentionally and unintentionally. Follow-up work and discussion are needed to identify the cause of this unintentional radiation as it has the potential to interfere with SKA-Low science. Our results indicate that both intended and unintended radiation from Starlink satellites will be detrimental to key SKA science goals without mitigation. Continued conversation with SpaceX could potentially result in future mitigations which the EDA2 instrument could efficiently monitor and characterise at the SKA-Low site.

Explore related subjects

astro-ph.IMastro-ph.EP

Keep this discovery

BibTeXRIS

Dylan Grigg, Steven Tingay, Marcin Sokolowski, Randall Wayth, Balthasar Indermuehle, Steve Prabu. 2023-09-27. Detection of intended and unintended emissions from Starlink satellites in the SKA-Low frequency range, at the SKA-Low site, with an SKA-Low station analog. https://doi.org/10.1051/0004-6361%2F202347654

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗