SearcharxivSearch

arXiv · 2310.04335

A detailed study of the polarisation convention of the Giant Metrewave Radio Telescope

Abstract

Our work aims to investigate the polarisation convention of the Giant Metrewave Radio Telescope (GMRT) radio telescope and understand whether the telescope follows the standard IAU/IEEE convention. The GMRT antennas are prime focus antennas, i.e. the radiation falling on the antenna feed reverses its circular polarisation. If this reflection is not taken into account, it will result in a reversal of circular polarisation. We carried out several tests to understand the GMRT polarisation convention. The observations were carried out on several strong and highly polarised pulsars with known polarisation properties at GMRT wavelengths, mainly covering frequency bands 2, 3 and 4. In addition, we tracked the signal from the feed to the fibre optic system, and fibre optic system to the user end. We also tracked satellites of known polarisations as well as utilised right and left circularly polarised helical antennas to study the polarisation convention. Our study shows that the GMRT channels 1 and 2 are true R and L, however, GMRT being a prime focus instrument, the reflection due to the dish reverses the sense of polarisation and converts the right circular polarisation (RCP) into left circular polarisation (LCP) and vice versa. This has not been taken into account and thus the GMRT Stokes V and U signs need to be reversed to make them consistent with the IAU/IEEE convention. This objective can be achieved by reassigning channel 1 to L and channel 2 to R for all circular feeds, i.e. bands 2, 3, and 4. The study remains inconclusive for the GMRT band 5, which has linear feeds.

Explore related subjects

Keep this discovery

BibTeXRIS

Poonam Chandra, S. Suresh Kumar, Sanjay Kudale, Devojyoti Kansabanik, Barnali Das, Preeti Kharb, Silpa Sasikumar, Biny Sebastian. 2023-10-06. A detailed study of the polarisation convention of the Giant Metrewave Radio Telescope. https://arxiv.org/abs/2310.04335

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM