SearcharxivSearch

arXiv · 2310.17113

Compact free-running InGaAs/InP single-photon detector with 40% detection efficiency and 2.3 kcps dark count rate

Abstract

Free-running InGaAs/InP single-photon detectors (SPDs) based on negative-feedback avalanche diodes (NFADs) are the key components for applications requiring asynchronous single-photon detection in the near-infrared region. From the perspective of practical applications, the features of SPDs in terms of high photon detection efficiency (PDE), low noise, large sensitive area, and compactness are highly desired for system integration and performance enhancement. Here, we present the implementation of a compact four-channel multimode fiber coupling free-running InGaAs/InP SPD, with the best overall performance to date. On the one hand, we design and fabricate structure-optimized InGaAs/InP NFAD devices with 25 $\mu$m diameter active area and integrated thin film resistors to enhance the maximum achievable PDE. On the other hand, we apply a compact thermoacoustic cryocooler to regulate the operating temperature of NFADs within a large range, and design a dedicated readout circuit with minimized parasitic parameters and tunable settings of hold-off time to suppress the afterpulsing effect. The SPD is then characterized to achieve remarkable overall performance simultaneously at 1550 nm, i.e., 40% PDE, 2.3 kcps dark count rate, 8% afterpulse probability and 49 ps timing jitter (full width at half maximum) under the conditions of 5.9 V excess bias voltage, 10 $\mu$s hold-off time and 213 K operation temperature. Such performance and the results of the long-term stability tests indicate that the SPD could be a favorable solution for practical applications.

Explore related subjects

Keep this discovery

BibTeXRIS

Qi Xu, Chao Yu, Wei Chen, Jianglin Zhao, Dajian Cui, Jun Zhang, Jian-Wei Pan. 2023-10-26. Compact free-running InGaAs/InP single-photon detector with 40% detection efficiency and 2.3 kcps dark count rate. https://doi.org/10.1109/jstqe.2023.3328870

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det