SearcharxivSearch

arXiv · 2311.03921

Fast and Efficient Type-II Phototransistors Integrated on Silicon

Abstract

Increasing the efficiency and reducing the footprint of on-chip photodetectors enables dense optical interconnects for emerging computational and sensing applications. Avalanche photodetectors (APD) are currently the dominating on-chip photodetectors. However, the physics of avalanche multiplication leads to low energy efficiencies and prevents device operation at a high gain, due to a high excess noise, resulting in the need for electrical amplifiers. These properties significantly increase power consumption and footprint of current optical receivers. In contrast, heterojunction phototransistors (HPT) exhibit high efficiency and very small excess noise at high gain. However, HPT's gain-bandwidth product (GBP) is currently inferior to that of APDs at low optical powers. Here, we demonstrate that the type-II energy band alignment in an antimony-based HPT results in a significantly smaller junction capacitance and higher GBP at low optical powers. We used a CMOS-compatible heterogeneous integration method to create compact optical receivers on silicon with an energy efficiency that is about one order of magnitude higher than that of the best reported integrated APDs on silicon at a similar GBP of 270 GHz. Bitrate measurements show data rate spatial density above 800 Tbps per mm2, and an energy-per-bit consumption of only 6 fJ/bit at 3 Gbps. These unique features suggest new opportunities for creating highly efficient and compact on-chip optical receivers based on devices with type-II band alignment.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Lining Liu, Simone Bianconi, Skylar Wheaton, Nathaniel Coirier, Farah Fahim, Hooman Mohseni. 2023-11-07. Fast and Efficient Type-II Phototransistors Integrated on Silicon. https://arxiv.org/abs/2311.03921

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det