Reynolds number dependence of length scales governing turbulent flow separation with application to wall-modeled large-eddy simulations

Rahul Agrawal; Sanjeeb Bose; Parviz Moin

Home/Archive/arXiv

arXiv · 2401.00075

Reynolds number dependence of length scales governing turbulent flow separation with application to wall-modeled large-eddy simulations

Rahul Agrawal·Sanjeeb Bose·Parviz Moin

View original source ↗Read source document ↗Export metadata ↓

Abstract

This article proposes a Reynolds number scaling of the required grid points to perform wall-modeled LES of turbulent flows encountering separation off a solid surface. Based on comparisons between the various time scales in a non-equilibrium (due to the action of an external pressure gradient) turbulent boundary layer, a simple definition of the near-wall ``under-equilibrium" and ``out-of-equilibrium" scales is put forward (where ``under-equilibrium" refers to scales governed by a quasi-balance between the viscous and the pressure gradient terms). It is shown that the former length scale varies with Reynolds number as lp Re^(-2/3). The same scaling is obtained from a simplified Green's function solution of the Poisson equation in the vicinity of the separation point. A-priori analysis demonstrates that the resolution required to reasonably predict the wall-shear stress (for example, errors lower than approximately 10-15% in the entire domain) in several nonequilibrium flows is at least O(10) lp irrespective of the Reynolds number and the Clauser parameter. Further, a series of a-posteriori validation studies are performed to determine the accuracy of this scaling including the flow over the Boeing speed bump, Song-Eaton diffuser, Notre-Dame Ramp, and the backward-facing step. The results suggest that for these flows, scaling the computational grids () such that / lp is independent of the Reynolds number results in accurate predictions of flow separation at the same ``nominal" grid resolution across different Reynolds numbers. Finally, it is suggested that in the vicinity of the separation and reattachment points, the grid-point requirements for wall-modeled large eddy simulations may scale as Re^4/3, which is more restrictive than the previously proposed flat-plate boundary layer-based estimates (Re1) of Choi and Moin (Phys. Fluids, 2012) and Yang and Griffin (Phys. Fluids, 2021).

Explore related subjects

physics.flu-dyn physics.comp-ph

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Rahul Agrawal, Sanjeeb Bose, Parviz Moin. 2023-12-29. Reynolds number dependence of length scales governing turbulent flow separation with application to wall-modeled large-eddy simulations. https://arxiv.org/abs/2401.00075

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗

arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗

arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗