Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2404.03447

ZynqMP-based board-management mezzanines for Serenity ATCA-blades

T. Mehner·L. E. Ardila-Perez·M. N. Balzer·O. Sander·D. Tcherniakhovski·M. Schleicher·M. Fuchs·G. Fedi·G. Gimas·G. M. Iles·M. Pesaresi·A. W. Rose·T. Schuh
View original source ↗Read source document ↗Export metadata ↓

Abstract

In the context of the CMS Phase-2 tracker back-end processing system, two mezzanines based on the Zynq Ultrascale+ Multi-Processor System-on-Chip (MPSoC) device have been developed to serve as centralized slow control and board management solution for the Serenity-family \textcolor{black}{Advanced Telecommunications Computing Architecture (ATCA)} blades. This paper presents the developments of the MPSoC mezzanines to execute the Intelligent Platform Management Controller (IPMC) software in the real-time capable processors of the MPSoC. In coordination with the Shelf Manager, once full-power is enabled, a CentOS-based Linux distribution is executed in the application processors of the MPSoC, on which EMPButler and the Serenity Management Shell (SMASH) are running.

Explore related subjects

physics.ins-det

Keep this discovery

BibTeXRIS

T. Mehner, L. E. Ardila-Perez, M. N. Balzer, O. Sander, D. Tcherniakhovski, M. Schleicher, M. Fuchs, G. Fedi, G. Gimas, G. M. Iles, M. Pesaresi, A. W. Rose, T. Schuh. 2024-04-04. ZynqMP-based board-management mezzanines for Serenity ATCA-blades. https://doi.org/10.1088/1748-0221/17/03/c03009

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det↗
arXiv2026

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det↗
arXiv2026

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det↗