Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2406.18335

New high-precision measurement system for electron-positron pairs from sub-GeV/GeV gamma-rays in the emulsion telescope

Yuya Nakamura·Shigeki Aoki·Tomohiro Hayakawa·Atsushi Iyono·Ayaka Karasuno·Kohichi Kodama·Ryosuke Komatani·Masahiro Komatsu·Masahiro Komiyama·Kenji Kuretsubo·Toshitsugu Marushima·Syota Matsuda·Kunihiro Morishima·Misaki Morishita·Naotaka Naganawa·Mitsuhiro Nakamura·Motoya Nakamura·Takafumi Nakamura·Noboru Nakano·Toshiyuki Nakano·Akira Nishio·Miyuki Oda·Hiroki Rokujo·Osamu Sato·Kou Sugimura·Atsumu Suzuki·Satoru Takahashi·Mayu Torii·Saya Yamamoto·Masahiro Yoshimoto
View original source ↗Read source document ↗Export metadata ↓

Abstract

The GRAINE project observes cosmic gamma-rays, using a balloon-borne emulsion-film-based telescope in the sub-GeV/GeV energy band. We reported in our previous balloon experiment in 2018, GRAINE2018, the detection of the known brightest source, Vela pulsar, with the highest angular resolution ever reported in an energy range of $>$80 MeV. However, the emulsion scanning system used in the experiment was designed to achieve a high-speed scanning, and it was not accurate enough to ensure the optimum spacial resolution of the emulsion film and limited the performance. Here, we report a new high-precision scanning system that can be used to greatly improve the observation result of GRAINE2018 and also be employed in future experiments. The system involves a new algorithm that recognizes each silver grain on an emulsion film and is capable of measuring tracks with a positional resolution for the passing points of tracks of almost the same as the intrinsic resolution of nuclear emulsion film ($\sim$70 nm). This resolution is approximately one order of magnitude smaller than that obtained with the high-speed scanning system. With this system, an angular resolution for gamma-rays of 0.1$^\circ$ at 1 GeV is expected to be achieved. Furthermore, we successfully combine the new high-precision system with the existing high-speed system, establishing the system to make a high-speed and high-precision measurement. Employing these systems, we reanalyze the gamma-ray events detected previously by only the high-speed system in GRAINE2018 and obtain an about three times higher angular resolution (0.22$^\circ$) in 500--700 MeV than the original value. The high-resolution observation may bring new insights into the gamma-ray emission from the Galactic center region and may realize polarization measurements of high-energy cosmic gamma-rays.

Explore related subjects

astro-ph.IMastro-ph.HE

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Yuya Nakamura, Shigeki Aoki, Tomohiro Hayakawa, Atsushi Iyono, Ayaka Karasuno, Kohichi Kodama, Ryosuke Komatani, Masahiro Komatsu, Masahiro Komiyama, Kenji Kuretsubo, Toshitsugu Marushima, Syota Matsuda, Kunihiro Morishima, Misaki Morishita, Naotaka Naganawa, Mitsuhiro Nakamura, Motoya Nakamura, Takafumi Nakamura, Noboru Nakano, Toshiyuki Nakano, Akira Nishio, Miyuki Oda, Hiroki Rokujo, Osamu Sato, Kou Sugimura, Atsumu Suzuki, Satoru Takahashi, Mayu Torii, Saya Yamamoto, Masahiro Yoshimoto. 2024-06-26. New high-precision measurement system for electron-positron pairs from sub-GeV/GeV gamma-rays in the emulsion telescope. https://doi.org/10.1016/j.astropartphys.2024.103055

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗