Exploring the Optimal Size of Grid-forming Energy Storage in an Off-grid Renewable P2H System under Multi-timescale Energy Management

Abstract

Utility-scale off-grid renewable power-to-hydrogen systems (OReP2HS), typically comprising photovoltaic plants, wind turbines, electrolyzers (ELs), and battery energy storage system (BESS), requires at least one component, generally the BESS, working with grid-forming ability to provide frequency and voltage references and regulate them through transient power support. However, existing designs of OReP2HS based on the energy management strategies (EMSs) with 5-min or hourly resolution fail to capture fast transients and may underestimate the BESS size required to ensure adequate grid-forming ability. This paper first proposes a framework of multi-timescale EMS covers from those for power system transient behaviors to second-level EL load adjustments and minute-level intra-day scheduling to coordinate renewable power, BESS, and ELs. Then, an iterative search procedure based on high-fidelity simulation is employed to determine the cost-effective BESS size that satisfies grid-forming, long-term energy balancing over 8760 hours, and emergency support requirements. Case studies based on a planned OReP2HS project in Inner Mongolia, China, show that the proposed EMS yields a base-case LCOH of 33.212 CNY/kg, with CAPEX of BESS accounting for 17.83% of total investment. The optimal BESS capacity represents 13.6% of the rated hourly renewable output and shows a yearly degradation of 4.87%. Sensitivity analysis reveals that reducing the electrolytic load adjustment time step from 90 to 5 seconds and increasing its ramping limit from 1% to 10% rated power per second, the BESS size decreases by 53.57%, and the LCOH decreases to 25.458 CNY/kg. Considering the cost of designing and manufacturing utility-scale ELs with fast load regulation capability, a load adjustment time step of 5 to 10 seconds and a ramping limit of 4-6% rated power per second are recommended.