Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2412.03016

NinjaSat: Astronomical X-ray CubeSat Observatory

Toru Tamagawa·Teruaki Enoto·Takao Kitaguchi·Wataru Iwakiri·Yo Kato·Masaki Numazawa·Tatehiro Mihara·Tomoshi Takeda·Naoyuki Ota·Sota Watanabe·Amira Aoyama·Satoko Iwata·Takuya Takahashi·Kaede Yamasaki·Chin-Ping Hu·Hiromitsu Takahashi·Yuto Yoshida·Hiroki Sato·Shoki Hayashi·Yuanhui Zhou·Keisuke Uchiyama·Arata Jujo·Hirokazu Odaka·Tsubasa Tamba·Kentaro Taniguchi
View original source ↗Read source document ↗Export metadata ↓

Abstract

NinjaSat is an X-ray CubeSat designed for agile, long-term continuous observations of bright X-ray sources, with the size of 6U ($100\times200\times300$ mm$^3$) and a mass of 8 kg. NinjaSat is capable of pointing at X-ray sources with an accuracy of less than $0^{\circ}\hspace{-1.0mm}.1$ (2$\sigma$ confidence level) with 3-axis attitude control. The satellite bus is a commercially available NanoAvionics M6P, equipped with two non-imaging gas X-ray detectors covering an energy range of 2-50 keV. A total effective area of 32 cm$^2$ at 6 keV is capable of observing X-ray sources with a flux of approximately 10$^{-10}$ erg cm$^{-2}$ s$^{-1}$. The arrival time of each photon can be tagged with a time resolution of 61 $\mu$s. The two radiation belt monitors continuously measure the fluxes of protons above 5 MeV and electrons above 200 keV trapped in the geomagnetic field, alerting the X-ray detectors when the flux exceeds a threshold. The NinjaSat project started in 2020. Fabrication of the scientific payloads was completed in August 2022, and satellite integration and tests were completed in July 2023. NinjaSat was launched into a Sun-synchronous polar orbit at an altitude of about 530 km on 2023 November 11 by the SpaceX Transporter-9 mission. After about three months of satellite commissioning and payload verification, we observed the Crab Nebula on February 9, 2024, and successfully detected the 33.8262 ms pulsation from the neutron star. With this observation, NinjaSat met the minimum success criterion and stepped forward to scientific observations as initially planned. By the end of November 2024, we successfully observed 21 X-ray sources using NinjaSat. This achievement demonstrates that, with careful target selection, we can conduct scientific observations effectively using CubeSats, contributing to time-domain astronomy.

Explore related subjects

astro-ph.IMastro-ph.HE

Keep this discovery

BibTeXRIS

Toru Tamagawa, Teruaki Enoto, Takao Kitaguchi, Wataru Iwakiri, Yo Kato, Masaki Numazawa, Tatehiro Mihara, Tomoshi Takeda, Naoyuki Ota, Sota Watanabe, Amira Aoyama, Satoko Iwata, Takuya Takahashi, Kaede Yamasaki, Chin-Ping Hu, Hiromitsu Takahashi, Yuto Yoshida, Hiroki Sato, Shoki Hayashi, Yuanhui Zhou, Keisuke Uchiyama, Arata Jujo, Hirokazu Odaka, Tsubasa Tamba, Kentaro Taniguchi. 2024-12-04. NinjaSat: Astronomical X-ray CubeSat Observatory. https://doi.org/10.1093/pasj%2Fpsaf014

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗