Test-Jig for production testing of RPC-DAQ modules in INO-ICAL Experiment

Yuvaraj Elangovan; Mandar Saraf; B. Satyanarayana; S. S. Upadhya; Ravindra Shinde; Gobinda Majumder; Purnendu Kumar; S. Thoi Thoi; Aditya Deodhar

arXiv · 2503.02072

Test-Jig for production testing of RPC-DAQ modules in INO-ICAL Experiment

Yuvaraj Elangovan·Mandar Saraf·B. Satyanarayana·S. S. Upadhya·Ravindra Shinde·Gobinda Majumder·Purnendu Kumar·S. Thoi Thoi·Aditya Deodhar

View original source ↗Read source document ↗Export metadata ↓

Abstract

The INO-ICAL experiment consist of 28,800 RPCs each equipped with a Front-End FPGA-based Data Acquisition (RPC-DAQ) module for acquiring detector signals. Due to the large number of RPC-DAQs are required, an automated test system is essential. RPC-DAQ Test-Jig is an FPGA module designed to generate standard test inputs to the RPC-DAQ supporting complete functionality testing. The RPC-DAQ has multiple functions such as strip hit latching, count rate monitoring, pulse stretching, trigger generation, TDC data collection, and Ethernet communication. To effectively test each of these logics the Test-Jig uses various test patterns allowing users to verify and debug RPC-DAQ modules at a faster rate. When generating a predefined event with known data the Test-Jig architecture generates data pattern similar to that of the detector and also verifies the received data from the RPC-DAQ simultaneously. This testing methodology helps in understanding the functionalities of the RPC-DAQ logic at various conditions. The developed Test-Jig and along with its test methodologies reduces the debugging time of RPC-DAQs. This Paper discuss the architecture of the Test-Jig and some of its test methodologies in detail.

Explore related subjects

physics.ins-det

Keep this discovery

BibTeX RIS

Yuvaraj Elangovan, Mandar Saraf, B. Satyanarayana, S. S. Upadhya, Ravindra Shinde, Gobinda Majumder, Purnendu Kumar, S. Thoi Thoi, Aditya Deodhar. 2025-03-03. Test-Jig for production testing of RPC-DAQ modules in INO-ICAL Experiment. https://arxiv.org/abs/2503.02072

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det↗

arXiv2026

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det↗

arXiv2026

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det↗