SearcharxivSearch

arXiv · 2503.14856

Enhanced Astrometry of the Rapid ASKAP Continuum Survey for Precise Localisation of Fast Radio Bursts

Abstract

Fast Radio Bursts (FRBs) are short, intense radio signals from distant astrophysical sources, and their accurate localisation is crucial for probing their origins and utilising them as cosmological tools. This study focuses on improving the astrometric precision of FRBs discovered by the Australian Square Kilometre Array Pathfinder (ASKAP) by correcting systematic positional errors in the Rapid ASKAP Continuum Survey (RACS), which is used as a primary reference for ASKAP FRB localisation. We present a detailed methodology for refining astrometry in two RACS epochs (RACS-Low1 and RACS-Low3) through crossmatching with the Wide-field Infrared Survey Explorer (WISE) catalogue. The uncorrected RACS-Low1 and RACS-Low3 catalogues had significant astrometric offsets, with all-sky median values of $0.58''$ in RA and $-0.26''$ in Dec. (RACS-Low1) and $0.29''$ in RA and $1.24''$ in Dec. (RACS-Low3), with a substantial and direction-dependent scatter around these values. After correction, the median offset was completely eliminated, and the 68\% confidence interval in the all-sky residuals was reduced to $0.2''$ or better for both surveys. By validating the corrected catalogues against other, independent radio surveys, we conclude that the individual corrected RACS source positions are accurate to a 1-$\sigma$ confidence level of $0.3''$ over the bulk of the survey area, degrading slightly to $0.4''$ near the Galactic plane. This work lays the groundwork to extend our corrections to the full RACS catalogue that will enhance future radio observations, particularly for FRB studies.

Explore related subjects

Keep this discovery

BibTeXRIS

Akhil Jaini, Adam T. Deller, Yuanming Wang, Emil Lenc, Marcin Glowacki. 2025-03-19. Enhanced Astrometry of the Rapid ASKAP Continuum Survey for Precise Localisation of Fast Radio Bursts. https://doi.org/10.1017/pasa.2025.28

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM