SearcharxivSearch

arXiv · 2503.19401

Using the antenna impedance to estimate soil electrical parameters for the MIST global 21-cm experiment

Abstract

Radio experiments trying to detect the global $21$~cm signal from the early Universe are very sensitive to the electrical properties of their environment. For ground-based experiments with the antenna above the soil it is critical to characterize the effect from the soil on the sky observations. This characterization requires estimating the soil's electrical conductivity and relative permittivity in the same frequency range as the observations. Here we present our initial effort to estimate the conductivity and relative permittivity of the soil using the impedance of an antenna mounted at a distance above the surface. In this technique, the antenna used for soil characterization is the same as the antenna used for sky observations. To demonstrate the technique we use the antenna of the MIST global $21$~cm experiment. We measured the antenna impedance at three sites in the Greater Concepci\'on area, Chile. The measurements were done between $25$ and $125$~MHz, matching the range used by MIST for sky observations. The soil parameters were estimated by fitting the impedance measurements with electromagnetic simulations of the antenna and soil. In this initial effort the soil was modeled as homogeneous. The conductivity at the three sites was found to be between $0.007$ and $0.049$~Sm$^{-1}$, and the relative permittivity between $1.6$ and $12.7$. The percent precision of the estimates at $68\%$ probability is, with one exception, better (lower) than $33\%$. The best-fit simulations have a better than $10\%$ agreement with the measurements relative to the peak values of the resistance and reactance across our frequency range. For MIST, these results represent a successful proof of concept of the use of the antenna impedance for soil characterization, and are expected to significantly improve in future implementations.

Explore related subjects

Keep this discovery

BibTeXRIS

Cinthia Altamirano, Ricardo Bustos, Raul A. Monsalve, Silvia E. Restrepo, Vadym Bidula, Christian H. Bye, H. Cynthia Chiang, Xinze Guo, Ian Hendricksen, Francis McGee, F. Patricio Mena, Lisa Nasu-Yu, Jonathan L. Sievers, Nithyanandan Thyagarajan. 2025-03-25. Using the antenna impedance to estimate soil electrical parameters for the MIST global 21-cm experiment. https://doi.org/10.1088/1538-3873%2Fadfa43

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM