SearcharxivSearch

arXiv · 2503.23685

An In-Situ Spatial-Temporal Sequence Detector for Neuromorphic Vision Sensor Empowered by High Density Vertical NAND Storage

Abstract

Neuromorphic vision sensors require efficient real-time pattern recognition, yet conventional architectures struggle with energy and latency constraints. Here, we present a novel in-situ spatiotemporal sequence detector that leverages vertical NAND storage to achieve massively parallel pattern detection. By encoding each cell with two single-transistor-based multi-level cell (MLC) memory elements, such as ferroelectric field-effect transistors (FeFETs), and mapping a pixel's temporal sequence onto consecutive word lines (WLs), we enable direct temporal pattern detection within NAND strings. Each NAND string serves as a dedicated reference for a single pixel, while different blocks store patterns for distinct pixels, allowing large-scale spatial-temporal pattern recognition via simple direct bit-line (BL) sensing, a well-established operation in vertical NAND storage. We experimentally validate our approach at both the cell and array levels, demonstrating that vertical NAND-based detector achieves more than six orders of magnitude improvement in energy efficiency and more than three orders of magnitude reduction in latency compared to conventional CPU-based methods. These findings establish vertical NAND storage as a scalable and energy-efficient solution for next-generation neuromorphic vision processing.

Explore related subjects

Keep this discovery

BibTeXRIS

Zijian Zhao, Varun Darshana Parekh, Po-Kai Hsu, Yixin Qin, Yiming Song, A N M Nafiul Islam, Ningyuan Cao, Siddharth Joshi, Thomas Kämpfe, Moonyoung Jung, Kwangyou Seo, Kwangsoo Kim, Wanki Kim, Daewon Ha, Sourav Dutta, Abhronil Sengupta, Xiao Gong, Shimeng Yu, Vijaykrishnan Narayanan, Kai Ni. 2025-03-31. An In-Situ Spatial-Temporal Sequence Detector for Neuromorphic Vision Sensor Empowered by High Density Vertical NAND Storage. https://arxiv.org/abs/2503.23685

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

From Grid to Chip: Power Architecture, Stability, and Flexibility of AI Data Centers

The rapid growth of artificial intelligence (AI) computing is transforming data centers into large, dynamic electrical loads. Their deployment is primarily constrained by energy availability and grid-connection capacity, which is further aggravated by the ability of power-delivery architectures, control systems, and computing workloads to operate reliably during fast grid disturbances. This article presents a technological perspective on AI data centers as grid-interactive computing systems. First, it reviews grid-integration bottlenecks, evolving connection policies, grid-code requirements, which has fostered new technological trends via spatio-temporal flexibility available through workload orchestration, cooling systems, on-site resources, and energy storage. Second, it maps the evolution of power-delivery architectures from medium-voltage grid interfaces to chip-level, discussing higher-voltage DC distribution, solid-state transformers, wide-bandgap devices, advanced chip-level power delivery, and liquid cooling. Third, it establishes a three-level stability framework spanning rack-level DC-bus dynamics, facility-level converter interactions, and system-level grid-coupled behavior. The framework connects dominant instability mechanisms, including constant power load effects, impedance interactions, forced oscillations, and operating-mode transitions, with suitable modeling, assessment, and mitigation approaches. Synthesizing these topics, this article highlights grid-to-chip co-design as a central requirement for scalable AI infrastructure, linking computing workloads, power-delivery systems, energy buffers, and grid operation.

cs.ET

A Time-Based Readout for Vector-Matrix Multiplication in Fully Analog Memristive SNNs

Artificial neural networks rely on vector-matrix multiplications (VMMs), whose implementation in von Neumann architectures is dominated by costly data movement between memory and processing units. Spiking neural networks (SNNs) mitigate this bottleneck by performing in-memory, analog VMMs using memristive crossbar arrays. However, conventional current-mode readout circuits incur significant area and power overhead. This work proposes a fully analog readout architecture based on voltage-to-time conversion of the VMM output. By sensing the column voltage, the proposed approach avoids current-mode summing and scaling circuitry, improving area and energy efficiency. Post-layout simulations of a 10x1 SNN implemented in a 130 nm CMOS technology validate the proposed architecture, while application to a trained 64x10 SNN for digit classification further demonstrates its feasibility for SNN inference.

cs.ET

Fractional-order hardware for neuromorphic computing: Is the order really the problem?

Does a neuromorphic system need a true power-law memory kernel, and if so, can anyone build one? Neuromorphic systems process signals spanning many timescales at once, from milliseconds to tens of seconds. Integer-order circuits buy each additional timescale with an additional state variable. Fractional-order dynamics offer a different bargain: one operator whose power-law kernel carries a continuum of timescales, tuned by one parameter, the order alpha. A fractional derivative is non-local, so evaluating it costs storage and arithmetic that grow with the retained history, where an integer-order derivative costs a constant. This review organizes the hardware literature around that cost. We derive the retained history needed to hold the truncation error below a tolerance epsilon, show that it scales as epsilon^(-1/alpha), and set beside it a second and independent limit on the direct form: in fixed point the weights themselves underflow, so word length caps the usable history however long the buffer is. The two limits move at very different rates with the order, and where they cross decides whether a word length can serve an order at all. We use both to sort published hardware into three strategies, note a fourth the numerical literature has developed and this hardware has not, and survey digital, analog and device work. Along the way we ask whether the field is worried about the right obstacle. It is not. Fabricated constant-phase devices already span the orders two groups identify as task-optimal, so the order gap has largely closed, leaving a residual gap near 0.1 and at the lower order describing cortical adaptation. What remains is a frequency-band gap of about three decades at the low end. That corner is not empty, since double-layer electrodes work there, but every device in it is discrete, and no integrable thin-film element has been characterized there.

cs.ET