Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2504.11328

Extended source fringe flats for the JWST MIRI Medium Resolution Spectrometer

N. Crouzet·M. Mueller·B. Sargent·F. Lahuis·D. Kester·G. Yang·I. Argyriou·D. Gasman·P. J. Kavanagh·A. Labiano·K. Larson·D. R. Law·J. Álvarez-Márquez·B. R. Brandl·A. Glasse·P. Patapis·P. R. Roelfsema·Ł. Tychoniec·E. F. van Dishoeck·G. S. Wright
View original source ↗Read source document ↗Export metadata ↓

Abstract

The detectors of the JWST Mid-Infrared Instrument (MIRI) Medium Resolution Spectrometer (MRS) form low-finesse resonating cavities that cause periodic count rate modulations (fringes) with peak amplitudes of up to 15% for sources external to MIRI. To detect weak features on a strong continuum and reliably measure line fluxes and line-flux ratios, fringe correction is crucial. This paper describes the first of two steps implemented in the JWST Science Calibration Pipeline, which is the division by a static fringe flat that removes the bulk of the fringes for extended sources. Fringe flats were derived by fitting a numerical model to observations of spatially extended sources. The model includes fringes that originate from two resonating cavities in the detector substrate (a third fringe component that originates from the dichroic filters is not included). The model, numerical implementation, and resulting fringe flats are described, and the efficiency of the calibration was evaluated for sources of various spatial extents on the detector. Flight fringe flats are obtained from observations of the planetary nebula NGC 7027. The two fringe components are well recovered and fitted by the model. The derived parameters are used to build a fringe flat for each MRS spectral band, except for 1A and 1B due to the low signal-to-noise ratio of NGC 7027 in these bands. When applied to extended sources, fringe amplitudes are reduced to the sub-percent level on individual spaxels. For point sources, they are reduced to amplitudes of 1 to 5% considering individual spaxels and a single dither position, and decrease to the 1 to 2% level after two-dimensional residual fringe correction. The fringe flats derived from this work are the reference files currently in use by the JWST Science Calibration Pipeline. They provide an efficient calibration for extended sources, and are less efficient for point sources.

Explore related subjects

astro-ph.IM

Keep this discovery

BibTeXRIS

N. Crouzet, M. Mueller, B. Sargent, F. Lahuis, D. Kester, G. Yang, I. Argyriou, D. Gasman, P. J. Kavanagh, A. Labiano, K. Larson, D. R. Law, J. Álvarez-Márquez, B. R. Brandl, A. Glasse, P. Patapis, P. R. Roelfsema, Ł. Tychoniec, E. F. van Dishoeck, G. S. Wright. 2025-04-15. Extended source fringe flats for the JWST MIRI Medium Resolution Spectrometer. https://doi.org/10.1051/0004-6361%2F202452903

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗