Accurate Angle-Resolved Raman Spectroscopy Methodology: Quantifying the Dichroic Edge Filter Effect

Tehseen Adel; Maria F. Munoz; Thuc T. Mai; Charlezetta E. Wilson-Stokes; Riccardo Torsi; Aurélien Thieffry; Jeffrey R. Simpson; Angela R. Hight Walker

arXiv · 2505.16063

Accurate Angle-Resolved Raman Spectroscopy Methodology: Quantifying the Dichroic Edge Filter Effect

Tehseen Adel·Maria F. Munoz·Thuc T. Mai·Charlezetta E. Wilson-Stokes·Riccardo Torsi·Aurélien Thieffry·Jeffrey R. Simpson·Angela R. Hight Walker

View original source ↗Read source document ↗Export metadata ↓

Abstract

Angle-resolved Raman spectroscopy (ARRS) is an effective method to analyze the symmetry of phonons and other excitations in molecules and solid-state crystals. While there are several configurations of ARRS instruments, the measurement system detailed here utilizes two pairs of linear polarizers and superachromatic half-wave plates. After the orientations of the linear polarizers are set to fixed angles, the two half-wave plates rotate independently, through motorized control, enabling 2D linear polarization mapping. Described within is a protocol to achieve high quality ARRS measurements leveraging phonons from easily accessible test materials [molybdenum disulfide (MoS_2), sapphire (Al_2O_3) and silicon] to validate the system and operation. Quantitative polarized Raman data strongly depends on the quality of sample surface and the optics: the order of placement, alignment, and any distortion caused by their coatings. This study identifies the impact of commonly used edge filters on the polarization response of materials with an anisotropic response as emulated by the T_2g phonon in the Si(100). We detect and model the significant distortion of the T_2g phonon polarization response originating from our dichroic edge filters, the results of which are broadly applicable to optics in any Raman instrument. This ARRS setup also enables helicity-resolved Raman measurements by replacing the first half-wave plate with a superachromatic quarter-wave plate; this configuration is also validated using the Raman response of the aforementioned test materials. This paper aims to increase the quality and reproducibility of polarized Raman measurements through both instrumental considerations and methodology.

Explore related subjects

physics.optics

Keep this discovery

BibTeX RIS

Tehseen Adel, Maria F. Munoz, Thuc T. Mai, Charlezetta E. Wilson-Stokes, Riccardo Torsi, Aurélien Thieffry, Jeffrey R. Simpson, Angela R. Hight Walker. 2025-05-21. Accurate Angle-Resolved Raman Spectroscopy Methodology: Quantifying the Dichroic Edge Filter Effect. https://arxiv.org/abs/2505.16063

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics↗

arXiv2026

A Two-Mirror Faceted Projection System for EUV Lithography

We propose an all-reflective two-mirror projection system for extreme ultraviolet (EUV) lithography operating at exposure wavelengths of $13.5$~nm (Mo/Si) and $11.2$~nm (Ru/Be), delivering a fourfold ($4\times$) demagnification of the periodic mask pattern at a numerical aperture approaching unity ($\mathrm{NA}_{\max} \approx 0.993$). In contrast to conventional EUV projection objectives that incorporate 6--10 aspheric mirrors with an overall optical throughput of less than $15\%$, the proposed design redirects each accepted discrete spatial diffraction order scattered by the mask onto the wafer via a dedicated pair of planar mirror facets. The number of reflections is strictly fixed at two for all accepted orders, retaining $50$--$60\%$ of the power leaving the mask in each accepted order. We derive a spatial geometry providing rigorous optical path length equalization across all diffraction orders, thereby removing order-dependent propagation phase shifts. Individually optimized 30-bilayer Bragg multilayer coatings are designed for each facet using the transfer matrix method combined with global evolutionary optimization algorithms. The architecture is generalized to a three-dimensional vector formulation with a two-dimensionally periodic mask. Utilizing inverse lithography technology, Fourier parameterization, and a differentiable electromagnetic modal waveguide solver, we solve the synthesis problem for binary absorber masks (La absorber on a Ru/Be/Sr multilayer mirror). We demonstrate simulated aerial images of sub-10-nm features on the wafer (isolated peaks with a full width at half maximum (FWHM) of approximately $5.4$~nm and line pairs with a critical dimension of $6$~nm) and find that the two peaks remain resolved for the tested wafer defocus values from $0$ to $5$~nm along the $z$-axis.

physics.optics↗

arXiv2026

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $\mu$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $\mu$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $\mu$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

physics.optics↗