Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2506.02469

Characterization of the VKI Plasmatron subsonic ICP jet combining optical emission spectroscopy, intrusive measurements, and CFD simulations

Andrea Fagnani·Bernd Helber·Damien Le Quang·Alessandro Turchi·Jimmy Freitas Monteiro·Annick Hubin·Olivier Chazot
View original source ↗Read source document ↗Export metadata ↓

Abstract

This paper addresses the characterization of the subsonic flow in the 1.2~MW Inductively Coupled Plasma (ICP) wind tunnel at the von Karman Institute for Fluid Dynamics (VKI), targeting chamber pressures of 50 and 100~mbar, and input electric powers between 150 and 300~kW. Ultraviolet to near-infrared optical emission spectroscopy measurements of the free-jet flow are carried out with an updated experimental set-up, calibration procedure, and data processing, providing high-quality absolute spatially-resolved emission spectra. Emission measurements agree with thermochemical equilibrium predictions within a range of conditions, allowing to extract experimental maps of cold-wall heat flux and dynamic pressure against the inferred free-jet enthalpy. A detailed comparison with the characterization methodology traditionally employed is presented, highlighting the need for an improved modeling strategy. Using the measured free-jet temperature and dynamic pressure only, a forward procedure for the computation of the stagnation line flow is proposed. The latter agrees with intrusive heat flux measurements through a range of test conditions, and for values of the recombination coefficient of the reference copper probe commonly found in the literature. Results demonstrate that a consistent framework between numerical simulations and experimental data can be achieved, defining an improved framework for the characterization of the subsonic ICP jet.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeXRIS

Andrea Fagnani, Bernd Helber, Damien Le Quang, Alessandro Turchi, Jimmy Freitas Monteiro, Annick Hubin, Olivier Chazot. 2025-06-03. Characterization of the VKI Plasmatron subsonic ICP jet combining optical emission spectroscopy, intrusive measurements, and CFD simulations. https://arxiv.org/abs/2506.02469

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗