Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2510.15958

Enhanced accumulation of bitumen residue in a highly concentrated tailings flow by microbubbles from in-situ catalytic decomposition of hydrogen peroxide

Kaiyu Zhou·Somasekhara Goud Sontti·Joe Zhou·Xuehua Zhang
View original source ↗Read source document ↗Export metadata ↓

Abstract

The massive volume of oil sands tailings has been one of the most challenging environmental issues. In this work, we experimentally explore a simple and effective approach to bitumen residue separation from a highly concentrated slurry flow of the artificial oil sands tailings. By utilizing microbubbles from in-situ catalytic decomposition of H2O2 at low concentrations, bitumen aggregation is enhanced on the top part of the hydrotransport pipeline. The microscopic image analysis revealed the in-situ formation of microbubbles and confirmed that magnetic particles present in the slurries contributed to the fast release of the gas products and bubble formation from hydrogen peroxide decomposition. A high-speed camera was applied to capture images of the tailings flow in the pipeline through a transparent view window. A large number of tiny bubbles were identified post to the injection of H2O2 to the slurry flow. More than 70 % bitumen could be recovered from a lab-scale pipeline loop within 30 mins after injection. The bitumen recovery efficiency from the collected froth was quantitatively compared under seven conditions with varied dosages, the concentration of H2O2, and the amount of magnetic solids in the slurries. Our results confirmed that the total dosage of H2O2 is the dominant factor in in-situ microbubble formation for enhanced bitumen aggregation in the flow. Importantly, microbubbles were generated rapidly in the real mature fine tailings. The results from our study provide insights into the preferential distribution of oil residue in the flow during hydrotransport without the requirement for an additional device. Removal of oily residues from concentrated slurries may bring economical and environmental advantages.

Explore related subjects

physics.flu-dynphysics.chem-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kaiyu Zhou, Somasekhara Goud Sontti, Joe Zhou, Xuehua Zhang. 2025-10-11. Enhanced accumulation of bitumen residue in a highly concentrated tailings flow by microbubbles from in-situ catalytic decomposition of hydrogen peroxide. https://doi.org/10.1016/j.fuel.2023.128249

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗
arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗
arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗