Hybrid Integration of InGaN Lasers in a Foundry-Fabricated Visible-Light Photonics Platform

Xin Mu; Frank Weiss; Hongyao Chua; Robert Lawrowski; Jared C. Mikkelsen; John N. Straguzzi; Hannes Wahn; Piyush Kumar; Guo-Qiang Lo; Joyce K. S. Poon; Mariel Jama; Wesley D. Sacher

arXiv · 2510.16699

Hybrid Integration of InGaN Lasers in a Foundry-Fabricated Visible-Light Photonics Platform

Xin Mu·Frank Weiss·Hongyao Chua·Robert Lawrowski·Jared C. Mikkelsen·John N. Straguzzi·Hannes Wahn·Piyush Kumar·Guo-Qiang Lo·Joyce K. S. Poon·Mariel Jama·Wesley D. Sacher

View original source ↗Read source document ↗Export metadata ↓

Abstract

Visible-spectrum photonic integrated circuits (PICs) present compact and scalable solutions for emerging technologies including quantum computing, biosensing, and virtual/augmented reality. Realizing their full potential requires the development of scalable visible-light-source integration methods compatible with high-volume manufacturing and capable of delivering high optical coupling efficiencies. Here, we demonstrate passive-alignment flip-chip bonding of 450-nm InGaN laser diodes onto a foundry-fabricated visible-light silicon (Si) photonics platform with silicon nitride (SiN) waveguides, thermo-optic (TO) devices, and photodetectors. Hybrid laser integration is realized using a sub-micron-precision die bonder equipped with a vision alignment system and a heatable pickup tool, allowing independent placement of multiple lasers onto a single Si chip. Co-design of the lasers and Si photonics, with lithographically defined alignment marks and mechanical stoppers, enables precise postbonding alignment. Efficient optical coupling between lasers and the SiN waveguides is demonstrated, with a minimum measured coupling loss of 1.1 dB. We achieve a maximum on-chip optical power of 60.7 mW and an on-chip wall-plug efficiency of 7.8%, the highest reported for hybrid-integrated visible-spectrum lasers, to our knowledge. An active PIC is also shown, integrating a bonded laser, an on-chip photodetector for power monitoring, and a thermo-optic switch for optical routing and variable attenuation. Overall, this work highlights passive-alignment flip-chip bonding as a practical, high-performance approach for integrating lasers onto visible-spectrum PICs. We envision that continued refinement of this technique within our photonics platform will support increasingly complex PICs with integrated lasers spanning the visible spectrum.

Explore related subjects

physics.optics

Keep this discovery

BibTeX RIS

Xin Mu, Frank Weiss, Hongyao Chua, Robert Lawrowski, Jared C. Mikkelsen, John N. Straguzzi, Hannes Wahn, Piyush Kumar, Guo-Qiang Lo, Joyce K. S. Poon, Mariel Jama, Wesley D. Sacher. 2025-10-19. Hybrid Integration of InGaN Lasers in a Foundry-Fabricated Visible-Light Photonics Platform. https://arxiv.org/abs/2510.16699

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics↗

arXiv2026

A Two-Mirror Faceted Projection System for EUV Lithography

We propose an all-reflective two-mirror projection system for extreme ultraviolet (EUV) lithography operating at exposure wavelengths of $13.5$~nm (Mo/Si) and $11.2$~nm (Ru/Be), delivering a fourfold ($4\times$) demagnification of the periodic mask pattern at a numerical aperture approaching unity ($\mathrm{NA}_{\max} \approx 0.993$). In contrast to conventional EUV projection objectives that incorporate 6--10 aspheric mirrors with an overall optical throughput of less than $15\%$, the proposed design redirects each accepted discrete spatial diffraction order scattered by the mask onto the wafer via a dedicated pair of planar mirror facets. The number of reflections is strictly fixed at two for all accepted orders, retaining $50$--$60\%$ of the power leaving the mask in each accepted order. We derive a spatial geometry providing rigorous optical path length equalization across all diffraction orders, thereby removing order-dependent propagation phase shifts. Individually optimized 30-bilayer Bragg multilayer coatings are designed for each facet using the transfer matrix method combined with global evolutionary optimization algorithms. The architecture is generalized to a three-dimensional vector formulation with a two-dimensionally periodic mask. Utilizing inverse lithography technology, Fourier parameterization, and a differentiable electromagnetic modal waveguide solver, we solve the synthesis problem for binary absorber masks (La absorber on a Ru/Be/Sr multilayer mirror). We demonstrate simulated aerial images of sub-10-nm features on the wafer (isolated peaks with a full width at half maximum (FWHM) of approximately $5.4$~nm and line pairs with a critical dimension of $6$~nm) and find that the two peaks remain resolved for the tested wafer defocus values from $0$ to $5$~nm along the $z$-axis.

physics.optics↗

arXiv2026

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $\mu$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $\mu$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $\mu$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

physics.optics↗