Mathematical derivation and verification of the amplitude of LISA's interferometric signals on an ultra-stable interferometer testbed

Alvise Pizzella; Lennart Wissel; Miguel Dovale-Alvarez; Pablo Martinez Cano; Rodrigo Garcia Alvarez; Christoph Bode; Juan Jose Esteban Delgado; Gerhard Heinzel

arXiv · 2602.18239

Mathematical derivation and verification of the amplitude of LISA's interferometric signals on an ultra-stable interferometer testbed

Alvise Pizzella·Lennart Wissel·Miguel Dovale-Alvarez·Pablo Martinez Cano·Rodrigo Garcia Alvarez·Christoph Bode·Juan Jose Esteban Delgado·Gerhard Heinzel

View original source ↗Read source document ↗Export metadata ↓

Abstract

The Laser Interferometer Space Antenna (LISA) mission aims to detect gravitational waves by interferometrically measuring the change of separation between free-falling test masses (TMs). LISA's interferometers must deliver pm/rtHz sensitivity while accommodating beam tilts up to 1 mrad at the photodiodes, which degrade the interferometric amplitude and increase the induced readout noise coupling. This paper uses an analytical framework developed by the authors in a previous work, based on minimal and justified approximations, that relates beam tilt to the resulting heterodyne signal amplitude in a generic two-beam interferometer with circular-area photodiodes (PDs). A set of interferometric topologies is analyzed, all of high relevance for LISA. We derive the exact amplitude response for an infinite detector and a closed-form approximation for finite detectors, and we validate both against numerical simulations and experimental measurements on an ultra-stable LISA-representative testbed. We then use this model to quantify the phase-noise amplification arising from reduced signal-to-noise ratio (SNR) under tilt, showing that curvature mismatches between the interfering beams substantially enhance this effect. Finally, we introduce a compact function that captures the angular dependence of correlated and uncorrelated phase noises in quadrant photodiode (QPD)-based readouts. Here, a new noise feature, caused by wavefront curvature mismatch, is predicted and measured for the first time. These results indicate that controlling wavefront curvature mismatch in the test mass interferometer (TMI) is essential to limit excess phase noise. The models and results derived in this paper, although originating in the context of LISA, are general and can be applied to any interferometric topology undergoing tilts with pivot on the detector plane.

Explore related subjects

astro-ph.IM

Keep this discovery

BibTeX RIS

Alvise Pizzella, Lennart Wissel, Miguel Dovale-Alvarez, Pablo Martinez Cano, Rodrigo Garcia Alvarez, Christoph Bode, Juan Jose Esteban Delgado, Gerhard Heinzel. 2026-02-20. Mathematical derivation and verification of the amplitude of LISA's interferometric signals on an ultra-stable interferometer testbed. https://arxiv.org/abs/2602.18239

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗

arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗

arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗