SearcharxivSearch

arXiv · 2606.21118

Mid-infrared-to-ultraviolet supercontinuum generation in low-loss tantalum pentoxide nanophotonic waveguides

Abstract

Optical frequency combs on photonic integrated platforms are revolutionizing precision metrology, bio-imaging, atomic and molecular sensing, and ultrafast photonics, yet most remain confined to the near-infrared. This restriction prevents access to the ultraviolet, visible, and mid-infrared bands critical for a vast array of quantum, atomic, and molecular systems. The fundamental obstacle has been the lack of a nanophotonic waveguide that simultaneously provides an ultra-broad transparency window, engineered dispersion, ultra-low propagation loss, and a strong Kerr nonlinearity, all while suppressing detrimental two-photon absorption at short wavelengths. Here, we overcome this challenge by exploring tantalum pentoxide for ultra-broadband supercontinuum spanning continuously from the ultraviolet to the mid-infrared, leveraging its broad transparency window (300-8000 nm), a high nonlinear refractive index three times larger than that of silicon nitride, and a wide bandgap that suppresses two-photon absorption. Critically, by using a photolithography assisted chemo-mechanical etching process that avoids a lossy SiO2 upper cladding, we achieve dispersion engineered waveguides with record-low propagation losses of 0.066 dB/cm at telecom wavelengths and 0.43 dB/cm at 780 nm, significantly facilitating the supercontinuum spectral extension into the ultraviolet and the mid-infrared. Pumping these anomalous-dispersion waveguides with femtosecond pulses at 1550 nm yields a gap-free, 3.2-octave supercontinuum spanning from 350 to 3200 nm via a soliton-based dynamics at only 54 pJ pulse energy, representing the broadest comb spectrum on this platform. We further demonstrate a relatively flat spectrum with a -30 dB bandwidth of 1182 nm by engineering normal dispersion, validate the comb coherence via heterodyne detection, and achieve soliton-effect pulse self-compression from 126.7 fs to 19.2 fs.

Explore related subjects

Keep this discovery

BibTeXRIS

Minghui Li, Qiankun Li, Xhizhi Zheng, Xueying Sun, Renhong Gao, Fan Jiang, Hairun Guo, Jintian Lin, Ya Cheng. 2026-06-19. Mid-infrared-to-ultraviolet supercontinuum generation in low-loss tantalum pentoxide nanophotonic waveguides. https://arxiv.org/abs/2606.21118

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics

A Two-Mirror Faceted Projection System for EUV Lithography

We propose an all-reflective two-mirror projection system for extreme ultraviolet (EUV) lithography operating at exposure wavelengths of $13.5$~nm (Mo/Si) and $11.2$~nm (Ru/Be), delivering a fourfold ($4\times$) demagnification of the periodic mask pattern at a numerical aperture approaching unity ($\mathrm{NA}_{\max} \approx 0.993$). In contrast to conventional EUV projection objectives that incorporate 6--10 aspheric mirrors with an overall optical throughput of less than $15\%$, the proposed design redirects each accepted discrete spatial diffraction order scattered by the mask onto the wafer via a dedicated pair of planar mirror facets. The number of reflections is strictly fixed at two for all accepted orders, retaining $50$--$60\%$ of the power leaving the mask in each accepted order. We derive a spatial geometry providing rigorous optical path length equalization across all diffraction orders, thereby removing order-dependent propagation phase shifts. Individually optimized 30-bilayer Bragg multilayer coatings are designed for each facet using the transfer matrix method combined with global evolutionary optimization algorithms. The architecture is generalized to a three-dimensional vector formulation with a two-dimensionally periodic mask. Utilizing inverse lithography technology, Fourier parameterization, and a differentiable electromagnetic modal waveguide solver, we solve the synthesis problem for binary absorber masks (La absorber on a Ru/Be/Sr multilayer mirror). We demonstrate simulated aerial images of sub-10-nm features on the wafer (isolated peaks with a full width at half maximum (FWHM) of approximately $5.4$~nm and line pairs with a critical dimension of $6$~nm) and find that the two peaks remain resolved for the tested wafer defocus values from $0$ to $5$~nm along the $z$-axis.

physics.optics

Antimony for broadband nanophotonics across the ultraviolet, visible and infrared

Semimetal elemental antimony (Sb) nanostructures show great potential for applications where nanophotonic properties play a key role, such as phase-change optical memories, non-linear optical elements, photothermal therapy agents, photodetectors and photocatalysts. However, designing advanced Sb-based photonic devices critically requires an accurate and reliable knowledge of the optical response of bulk and nanoscale Sb. Herein, we report for the first time a fully consistent and accurately measured dielectric function for Sb nanoscale films in a wide spectral range from the ultraviolet to the far infrared (4 - 0.04 eV, i.e. ~ 0.3 - 30 $\mu$m), surpassing previous reports that explored a limited spectral range. It is found that the Sb spectral response is driven exclusively by giant interband transitions in the visible up to mid infrared (4 - 0.4 eV, i.e. ~ 0.3 - 3 $\mu$m), and that their contribution dominates over that of free carriers down to 0.12 eV (i.e. ~ 10 $\mu$m). Such spectral response enables Sb nanostructures to display spectrally selective and tunable nanophotonic resonances. First, we showcase interband plasmonic resonances in the visible-to-near infrared for Sb nanogratings. Second, we report giant refractive index dielectric resonances in the mid infrared for nanostructured Sb/dielectric/metal resonant cavities. These findings open a pathway to optimized planar Sb nanoscale designs enabling a tailored light-matter interaction, which will be useful for integrated data, telecom, medical, optoelectronic and energy conversion devices operating in a broad spectral range.

physics.optics