SearcharxivSearch

arXiv · 2607.09148

Masking Algorithm for CCD Bleeding in Korea Microlensing Telescope Network Images

Abstract

Astronomical CCD images are often affected by bleeding from bright sources, producing column-aligned streaks that degrade source detection and photometry. We present a pixel-level masking algorithm for bleeding in Korea Microlensing Telescope Network (KMTNet) images, in which these streaks extend along detector columns away from the readout register. The algorithm identifies bleed-generating pixels using a conservative bleeding threshold and a bleeding index that quantifies excess signal along the expected bleeding direction. The extent of each bleed trail is then determined by termination criteria based on a background-relative detection threshold and a continuity condition. To optimize these termination parameters, we generate multiple candidate masks and evaluate them with an F-beta-like score that favors high purity while preserving recovery of sources whose photometry is biased by bleeding. Using the final mask, we apply interpolation-based cleaning and assess the performance in terms of completeness and photometric accuracy in a crowded KMTNet field, using Gaia DR3 as a reference. The source completeness improves from 94.08% to 98.61%, primarily by enabling proper aperture placement that was previously hindered by bleeding. For selected bleeding-affected sources, the root-mean-square photometric offset decreases from 0.623 mag to 0.068 mag. These results demonstrate that the algorithm provides a practical framework for mitigating bleeding artifacts in KMTNet images. We further examine the stability of the algorithm across different observing conditions and discuss limitations of the current masking and cleaning procedure.

Explore related subjects

Keep this discovery

BibTeXRIS

Jiseop Shin, Mankeun Jeong, Myungshin Im, Seo-Won Chang, Sang-Mok Cha, Seong-Kook Lee. 2026-07-10. Masking Algorithm for CCD Bleeding in Korea Microlensing Telescope Network Images. https://arxiv.org/abs/2607.09148

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM