Effects of anisotropic confinement on droplet rebound from superhydrophobic surfaces

M. Feinberg; S. A. Hosseini; I. Karlin

Home/Archive/arXiv

arXiv · 2607.16367

Effects of anisotropic confinement on droplet rebound from superhydrophobic surfaces

M. Feinberg·S. A. Hosseini·I. Karlin

View original source ↗Read source document ↗Export metadata ↓

Abstract

On flat superhydrophobic surfaces, droplet rebound is well described by a single inertio-capillary time scale, yielding a contact-time that is independent of impact energy. This single-mode response reflects the radial symmetry of flat-plate impacts. We demonstrate that an anisotropic geometric constraint, imposing a fixed spreading length along one axis, breaks this degeneracy and splits the rebound into a reciprocal pair of inertio-capillary modes. The fixed length also couples the contact-time to the Weber-dependent maximum spread, introducing an impact-energy dependence absent on the flat plate. We realize this constraint with grooved substrates, simulated using a non-ideal, entropic, multiple-relaxation-time lattice Boltzmann method and validated against the experiments of Chantelot et al. Extending their blob model from a single transverse scale to the reciprocal pair, we organize both modes through a geometric blob number and relate their time scales to the Weber number and groove width. We show that on non-wetting grooves the reciprocal modes are recovered directly, and explore the effects of finite wall affinity, using competition between the two modes to explain an observed two-branch structure in the contact-time response on mildly wetting, superhydrophobic grooves. Predictions tied to global energy balance reproduce cleanly across all conditions, while those tied to the details of the droplet's spread morphology are approximate but directionally correct. These results show that anisotropic confinement turns contact-time reduction from a question of accelerating a single rebound mode into one of selecting between conjugate inertio-capillary modes.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeX RIS

M. Feinberg, S. A. Hosseini, I. Karlin. 2026-07-17. Effects of anisotropic confinement on droplet rebound from superhydrophobic surfaces. https://arxiv.org/abs/2607.16367

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗

arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗

arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗