Characterising the response of an International LOFAR Station

Abstract

Phased-array radio interferometers with fixed antennas are a highly scalable design which can achieve a large gain. However they are complex systems and challenging to calibrate. Here we examine the response of an International LOFAR Station, the high-band antennas of the Irish LOFAR station. In modelling our measured responses, we account for projection effects, the frequency-dependence of the aperture efficiency and pulsar spectra, as well as sky and instrumental noise contributions. We perform long-track observations of 11 bright pulsars as they move across the sky, apply RFI mitigation and determine the signal-to-noise ratio response as a function of time, elevation and azimuth. We use the DreamBeam software to model the beam response of the station to compare with what is observed. The sensitivity map so obtained was validated using observations of PSR B0329+54 on the Swedish LOFAR station. As expected, the sensitivity is higher near the zenith. However, an asymmetry with respect to the zenith point is detected. Characterising the instrumental response in azimuth reveals a better performance as the targets rise, as compared to when they set. This trend is seen for all pulsars and is consistent with other International Stations. The magnitude of the effect can exceed 20%. We consider variations in the beam model and noise level, both frequency- and time- dependent, to try to account for this. A possible explanation for the hysteresis-like response in elevation could be an imbalanced signal weighting of the polarisation components. This work addresses the importance of accurate beam modelling and noise evaluation for the LOFAR 2.0 system upgrade as well as being relevant to the under-construction SKA-Low facility.