SearcharxivSearch

arXiv · 2608.02118

Pollux UV & FUV polarimeters: first lab results

Abstract

Pollux is a high-resolution spectropolarimeter proposed by a European consortium for the Habitable Worlds Observatory (HWO). Its design covers a broad spectral range from the far-ultraviolet (FUV) to the near-infrared (97-1\,750 nm), with polarimetric channels relying on \ch{MgF2} birefringent optics in the mid- and near-UV (MUV-NUV), and on an innovative all-reflective polarimeter in the FUV, where no birefringent material is available. To validate these polarimeters, whose required polarimetric precision is $10^{-3}$, a dedicated vacuum ultraviolet test bench has been developed, with two configurations: one for the MUV-NUV range (120-290 nm) and one for the FUV range (98-120 nm). We present the first laboratory results obtained with this bench. On the MUV-NUV configuration, the full optical chain has been integrated: a first polarised spectrum of the deuterium lamp was acquired, the polarisation generation subsystem was validated against Mueller matrix predictions, and a first end-to-end polarimetric measurement was performed. On the FUV configuration, the windowless deuterium plasma source has been characterised, the alignment strategy of the K-mirror modulator has been implemented, and the mirror-based analyser has been manufactured and tested, showing a polarisation extinction ratio of 10 at 120 nm. These results demonstrate the operation of the bench and pave the way for the characterisation of the polarimetric precision of the Pollux polarimeters, increasing the Technology Readiness Level of UV spectropolarimetry for HWO.

Explore related subjects

Keep this discovery

BibTeXRIS

Adrien Girardot, Ninon Demelier, Coralie Neiner, Jean-Michel Reess, Juan Ignacio Larruquert, Paloma Lopez-Reyes, Anejandro Garcia Canas, Nuria Gutierrez Luna, Ana Iglesias Moreno. 2026-08-03. Pollux UV & FUV polarimeters: first lab results. https://arxiv.org/abs/2608.02118

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM