Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2608.14406

Effect of Twisted-Yarn Architecture on Pressure and Proximity Sensing Characteristics of Textile Capacitive Sensors for Robotic Skin

Ishtia Zahir·Eslam Saleh·Maryam Rezayati·Güunter Grabher·Gaffar Hossain
View original source ↗Read source document ↗Export metadata ↓

Abstract

Textile-integrated capacitive sensors offer flexible and conformable tactile sensing for wearable electronics and human-robot interaction; however, the influence of yarn-level architecture on capacitive transduction characteristics remains insufficiently quantified. This work presents a textile capacitive sensing platform based on silver-coated yarns coated with polydimethylsiloxane and assembled into one-, two-, and four-layer twisted configurations. The influence of effective electrode overlap area and inter-fiber separation on the capacitive response is systematically investigated, enabling architecture-dependent tuning of pressure and proximity sensing characteristics. Pressure was calculated using the localized single-fiber contact area, corresponding to stresses of 0.4-3.9 MPa. Increasing the layer number improved mechanical strength and sensing performance: elongation at break increased from 37.5% to 62.5% and 85.0%, while the maximum load increased from 23.3 to 42.7 and 89.7 N. Sensitivity increased with layer number and frequency, reaching 0.1331 MPa$^{-1}$ for the four-layer sensor at 100 kHz. The four-layer configuration also exhibited low hysteresis, minimal thermal drift from 25 to 90 $^\circ$C, and stable operation over 15,000 cycles. Proximity detection ranges of 60, 50, and 40 mm were obtained for the one-, two-, and four-layer sensors, respectively, revealing an architecture-dependent sensitivity-range trade-off. A 4$\times$4 textile sensing array enabled spatial contact mapping, while robotic-arm integration demonstrated real-time touch and proximity detection with an end-to-end robotic system latency (from detection to robot reaction) of 403 ms. The results establish yarn architecture as a tunable design parameter governing the measurement characteristics of textile-integrated capacitive sensing systems.

Explore related subjects

cs.ROphysics.ins-det

Keep this discovery

BibTeXRIS

Ishtia Zahir, Eslam Saleh, Maryam Rezayati, Güunter Grabher, Gaffar Hossain. 2026-08-14. Effect of Twisted-Yarn Architecture on Pressure and Proximity Sensing Characteristics of Textile Capacitive Sensors for Robotic Skin. https://arxiv.org/abs/2608.14406

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

IMLE-VLA: Fast Single-Step Action Generation for Vision-Language-Action Policies

Vision-language-action (VLA) policies leverage pretrained vision-language backbones to achieve strong cross-task generalization. A leading design couples this backbone with a dedicated continuous action head trained via diffusion or flow matching. However, such heads rely on iterative multi-step sampling, for example 10 Euler steps in $\pi_{0.5}$. This creates an inference bottleneck that produces stop-and-go movement in the robot and slower task completion. We introduce IMLE-VLA, which replaces the iterative action head with a single-step conditional generator trained via conditional Implicit Maximum Likelihood Estimation (cIMLE). The cIMLE objective promotes multimodal action coverage, avoiding the mode collapse of naive regression heads while eliminating multi-step sampling entirely. When IMLE-VLA is applied to $\pi_{0.5}$, it increases inference frequency 3.67x (55 Hz vs. 15 Hz), enabling up to 11x higher action throughput. On the 40-task LIBERO benchmark, IMLE-VLA achieves the highest average success rate (98.0%) among all baselines while leading in inference frequency. Under the test-time perturbations of LIBERO-plus, IMLE-VLA retains $\pi_{0.5}$'s robustness while other baselines degrade sharply, confirming that the cIMLE head preserves generalization. Real-world experiments on a Franka Emika Panda across four tasks demonstrate smoother motion (2.2x to 3.0x lower jerk) and faster task completion, with IMLE-VLA outperforming $\pi_{0.5}$ on every task and reducing average VLA inference time per episode by 3.9x to 6.6x. Videos and code are available at https://kianhk6.github.io/IMLE-VLA/

cs.RO↗
arXiv2026

ObstaDiff: Generalizable Diffusion Policy Learning via Obstacle-aware Representations

Imitation learning has achieved impressive results in robotic manipulation, yet most existing approaches assume clean backgrounds and lack explicit mechanisms for obstacle-aware motion generation. Extending such policies to cluttered, real-world scenes with unstructured obstacles remains a key generalization challenge. We present ObstaDiff, a decomposed diffusion-policy framework with a lightweight obstacle-aware visual encoder. ObstaDiff extracts a structured target-obstacle-background representation, enabling the downstream alignment policy to generate end-effector trajectories toward a target-centered bottleneck pose while reasoning about surrounding obstacles. We evaluate ObstaDiff on 61 real-robot greenhouse trials per method (366 executions in total). ObstaDiff achieves 75.41% average task success and 8.20% average obstacle collision rate, outperforming representative imitation-learning baselines and improving generalization in cluttered agricultural scenes.

cs.RO↗
arXiv2026

Testing Between the Test Cases: Proving End-to-End Steering in Conditions You Never Drove

AI-based automated vehicle testing is challenging because a model that passes every test condition can still fail in the real world. Formal verification offers a way to directly address this gap. On a simulated highway and an arterial road we trained two small end-to-end steering networks each in CARLA, one on clear conditions alone and one on clear, fog, night and low sun. All four models were driven against a 2.19 ft lane-departure budget. Without driving again, we used bound propagation, a formal method that reads the trained weights, to compute how far steering can drift at every disturbance strength between two captured images. One calculation covers more than a campaign could drive: on the arterial it spans 133 poses, where ten intensities each would be 10^133 combinations, in minutes on one GPU. Not only did formal verification find conditions that broke the clear-trained policy without simulation testing, it provided some preliminary evidence for potential failures between the test cases. Our overall conclusion is that formal verification is a viable complement to simulation, and could be adopted as a part of verification and validation for automated driving.

cs.RO↗