Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2608.16151

Highly Efficient 3-in-1 FPGA-Based Unit Combining an ADC, DAC, and Multichannel Pulse Generator for Pulsed EPR Spectroscopy

N. P. Isaev·A. R. Melnikov·A. V. Vedkal·A. S. Ishchenko·A. M. Sokolov·E. A. Voronkov·S. L. Veber
View original source ↗Read source document ↗Export metadata ↓

Abstract

A hardware and software system for pulsed electron paramagnetic resonance (EPR) spectroscopy is presented, built around a single PCI Express (PCIe) card that combines a 16-bit digital-to-analog converter (DAC) with a 10 GS/s effective sample rate, a 2.5 GS/s 14-bit analog-to-digital converter (ADC), and an 11-channel pulse generator on board. Custom firmware reloads the pulse-generator and DAC buffers and streams the digitized data in parallel with a running experiment, so that no time is lost on data input or output. The unit is integrated into the open-source Atomize software and controlled at the level of pulse sequences through a high-level Python application programming interface (API). Benchmarking with a four-pulse double electron-electron resonance (DEER) sequence shows that the card reaches close to 100% time efficiency for accumulation times of a few milliseconds per pulse sequence, even for demanding arbitrary waveform generator (AWG) protocols. Although demonstrated for a single sequence, the efficiency proved insensitive to the number of pulses, the number of measurement points, or the phase-cycling depth, so that comparable performance is expected for any protocol whose shot repetition time exceeds the ~2 ms reprogramming time of the card. The on-the-fly reprogramming, which makes every successive sequence fully independent, also enables nonuniform sampling and acquisition. The system design, its firmware, the Python API, and its performance in pulsed EPR applications are described.

Explore related subjects

physics.chem-phphysics.ins-det

Keep this discovery

BibTeXRIS

N. P. Isaev, A. R. Melnikov, A. V. Vedkal, A. S. Ishchenko, A. M. Sokolov, E. A. Voronkov, S. L. Veber. 2026-08-17. Highly Efficient 3-in-1 FPGA-Based Unit Combining an ADC, DAC, and Multichannel Pulse Generator for Pulsed EPR Spectroscopy. https://arxiv.org/abs/2608.16151

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Breaking Water at Graphene Defects

Water dissociation at solid surfaces underpins processes ranging from corrosion and catalysis to electrochemistry and photovoltaics. Defects often serve as reactive sites for dissociation, yet how solvation influences water dissociation at such sites remains poorly understood. Here, we use state-of-the-art machine-learned interatomic potentials to explore water dissociation at defective graphene-water interfaces. We show that solvation qualitatively changes the reaction mechanism at a graphene single vacancy (SV), opening pathways that are absent for an isolated water molecule. Whereas the gas-phase process proceeds via a single concerted channel, the solvated SV splits water through two competing pathways: a basic route forming SV-H and OH-(aq), and an acidic route forming SV-OH and H3O+(aq). These lower-barrier pathways produce distinct chemisorbed intermediates that enhance graphene-water adsorption. Accordingly, even a simple carbon vacancy gives rise to unexpectedly rich interfacial chemistry, coupling surface chemistry to interfacial charge and wettability, with implications for carbon functionalization and nanofluidic transport.

physics.chem-ph↗
arXiv2026

Comprehensive Study of L-Menthol and Octanoic Acid as a Hydrophobic Eutectic Solvent

Hydrophobic eutectic solvents (HES) based on natural compounds represent promising green alternatives to conventional solvents. In this work, we investigate the physicochemical, structural, and dynamical properties of an ES formed by L-menthol and octanoic acid using a combined experimental and molecular dynamics simulation approach. Five compositions with molar ratios from 1:3 to 3:1 were studied with molecular dynamics simulation in the temperature range 15 degrees C to 35 degrees C. Experimental measurements of density and viscosity in the temperature range from 5 degrees C to 35 degrees C were complemented with results obtained from MD simulations employing the OPLS force field. Structural analyses based on radial distribution functions and Kirkwood-Buff integrals reveal that the dominant interactions in the mixture are hydrogen bonds between L-menthol and octanoic acid molecules. Dynamic properties, including self-diffusion coefficients and hydrogen-bond lifetimes, indicate that intermolecular hydrogen bonds between the two components are stronger and longer-lived than bonds between identical species. These findings provide molecular-level insight into the structure and transport properties of menthol-based ESs relevant for green solvent applications.

physics.chem-ph↗
arXiv2026

More is not always better: Dissociative photoionization limits the EUV absorbing photacid generator pentafluorophenyl triflate in photolithography

Pentafluorophenyl triflate has been explored as a highly absorbing neutral photoacid generator (PAG) candidate for next generation chemically amplified resists used in extreme ultraviolet (EUV) lithography. Although increased fluorination enhances EUV absorption, this study demonstrates that such an approach does not necessarily improve photoacid generation efficiency. Using photoelectron-photoion coincidence (PEPICO) spectroscopy at the 92 eV photon energy of the EUV scanners in combination with quantum chemical calculations, the dissociative photoionization of pentafluorophenyl triflate was systematically investigated. The photoionization mass spectrum reveals extensive fragmentation, with the parent ion contributing only 3.1 % of the total signal and CF$_3^+$ representing the dominant product ion. Computed appearance energies align well with experimental trends and support a sequential fragmentation pathway involving loss of SO$_2$, CF$_3$, and CO. Crucially, none of the major dissociation channels yield precursors capable of forming triflic acid, the strong photoacid required for efficient deprotection reactions in chemically amplified resists. Combined with previous dissociative electron attachment studies indicating similarly unfavorable fragmentation, the results demonstrate that despite its high EUV absorption cross section, pentafluorophenyl triflate is unsuitable as a PAG for EUV lithography. The findings highlight the importance of understanding fundamental photoionization and electron interaction mechanisms to guide the rational design of next generation high performance EUV photoresists.

physics.chem-ph↗