SearcharxivSearch

arXiv · 2608.26524

Background Intensity Estimation for Cassini-ISS Image Using Deep Learning-Based Diffusion Model

Abstract

Accurate background intensity estimation is crucial for precise astrometric measurements in astronomical imaging, particularly in complex scenarios such as those encountered in Cassini Imaging Science Subsystem (ISS) observations of Saturn's ring system. Traditional methods, like polynomial fitting and statistical method, often fail in non-uniform conditions, such as those caused by Saturn's rings or scattered light, due to mismatched assumptions and reliance on prior knowledge. This results in biased estimates and poor generalizability. We propose a deep learning framework based on Denoising Diffusion Probabilistic Model (DDPM) to address these challenges. By learning noise patterns and iteratively reconstructing backgrounds, DDPM improve background intensity estimation in ring-gap regions of ISS images by up to 62% relative to polynomial fitting. Additionally, When applied to centroiding of unresolved satellites in ring-gap, DDPM-based background estimation enhances positional precision by about 14% in the line direction and 15% in the sample direction. The framework autonomously captures spatial correlations, requires no manual parameter tuning, and generalizes across diverse backgrounds. These characteristics make it a promising, assumption-light solution for background estimation tasks in astrometry, photometry, and source detection, with potential applications to exoplanet transit imaging, deep-field surveys, and future missions.

Explore related subjects

Keep this discovery

BibTeXRIS

Yongxin Chen, Qingfeng Zhang, Tianle Zhou, Kai Tang. 2026-08-27. Background Intensity Estimation for Cassini-ISS Image Using Deep Learning-Based Diffusion Model. https://doi.org/10.3847/1538-3881%2Fae3001

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM