SearcharxivSearch

arXiv · 2609.19579

Recovering Aggressively Pruned Vision-Language-Action Models with Offline Hidden-State Distillation

Abstract

Vision-language-action (VLA) models let robots follow language instructions, but their language backbones of several billion parameters are the main obstacle to running them on robot hardware. Structured pruning reduces that backbone, and removing 63% of it from OpenVLA-OFT drops LIBERO-Long success from 93.2% to 0.8%. A recent approach restores such a model with supervised fine-tuning followed by reinforcement learning, which needs online rollouts and hundreds of GPU-hours. We recover most of the lost success entirely offline. Width pruning narrows the blocks but keeps the residual stream at its original size, so teacher and student hidden states have the same shape and are matched directly, without a projector. Training against a cache built in one teacher pass lifts the 63%-reduced student to within 3.5 points of the teacher in about 8 GPU-hours. A sweep over nine ratios locates where the recovery objective starts to matter. Up to 45% reduction the two do not differ significantly on OpenVLA-OFT. Hidden-state distillation then adds +2.1 to +4.5 points there between 63% and 87%, and +9.4 to +22.1 points on CogACT from 63% onward. At 81% on CogACT, a tripled recovery budget narrows the distilled student's gap to the teacher to 3.9 points on average, while supervised recovery stays more than 20 points below. At matched compression, width pruning yields higher success and depth pruning lower latency. On a 6-DoF manipulator, the distilled student at 72% reduction reaches 77.5% success against 59.5% for supervised recovery, runs 2.23x faster on-board than the teacher, and uses 62% less memory.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Chiyoung Kim, Sanghyuk Roy Choi, Minhyeok Lee. 2026-09-17. Recovering Aggressively Pruned Vision-Language-Action Models with Offline Hidden-State Distillation. https://arxiv.org/abs/2609.19579

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Highly-Efficient Differentiable Simulation for Robotics

Robotics simulators have improved significantly in computational speed and scalability, enabling them to generate years of simulated data for complex systems in minutes or hours. Despite these advances, efficiently and accurately computing simulation derivatives remains an open challenge. Addressing this would accelerate the convergence of reinforcement learning and trajectory optimization algorithms, particularly for contact-rich problems. This paper introduces a unifying framework for robotic simulation that accounts for all factors, including dynamics, collisions, and friction. The resulting algorithm computes analytical derivatives of the simulation by implicit differentiation, explicitly handling the intrinsic non-smoothness of the collision and frictional stages while exploiting the sparsity induced by the multi-body structure. Benchmark results demonstrate state-of-the-art performance, with timings ranging from $5\,μ$s for a 7-dof manipulator to $95\,μ$s for a 36-dof humanoid, an improvement of at least two orders of magnitude over alternative methods. Implemented in C++, the code will be open-sourced after the review process to support applications such as simulation-driven learning and real-time control.

cs.RO

GeCCo -- a Generalist Contact-Conditioned Policy for Loco-Manipulation Skills on Legged Robots

Most modern approaches to quadruped locomotion focus on using Deep Reinforcement Learning (DRL) to learn policies from scratch, in an end-to-end manner. Such methods often fail to scale, as every new problem or application requires time-consuming and iterative reward definition and tuning. We present Generalist Contact-Conditioned Policy (GeCCo) --- a low-level policy trained with Deep Reinforcement Learning that is capable of tracking arbitrary contact points with a quadruped robot. We shift from task-specific end-to-end learning to a modular hierarchy in which a single planner-agnostic, contact-conditioned tracking policy serves as a robust interface between planning and control. By maintaining stable contact execution under dynamic uncertainty and planner mismatch, the policy enables high-level planners (e.g., handcrafted, learned, or optimization-based) to be composed and swapped without retraining. We demonstrate the scalability and robustness of our method by evaluating on a wide range of locomotion and manipulation tasks in a common framework and under a single generalist policy. These include a variety of gaits, traversing complex terrains (e.g., stairs and slopes) as well as previously unseen stepping-stones and narrow beams, and interacting with objects (e.g., pressing a button, pushing a barrel). Our framework acquires new behaviors more efficiently, simply by combining a task-specific high-level contact planner and the pre-trained generalist policy. Project website: https://vassil-atn.github.io/gecco.github.io

cs.RO

ERUPT: An Open Toolkit for Interfacing with Robot Motion Planners in Extended Reality

We present the Extended Reality Universal Planning Toolkit (ERUPT), an extended reality (XR) system for interactive motion planning. This paper serves to introduce our open-source system to others who can use it as a base to develop immersive robot interaction applications. Our system allows users to create and dynamically reconfigure environments while they plan robot paths. ERUPT uses XR to provide a broad range of natural interaction capabilities, allowing users to grab and adjust objects in the environment similar to interaction in the real world, rather than using a mouse and keyboard with the scene projected onto a 2D computer screen. Our system integrates with MoveIt, a manipulation planning framework, allowing users to send motion planning requests and visualize the resulting robot paths in virtual or augmented reality. We provide a broad range of interaction modalities, allowing users to modify objects in the environment and interact with a virtual robot. Our system allows operators to visualize robot motions, ensuring desired behavior as it moves throughout the environment, without risk of collisions within a virtual space, and to then deploy planned paths on physical robots in the real world. Code can be found at https://github.com/parasollab/erupt.

cs.RO