Searcharxiv⌕ Search

arXiv · 2610.13816

Dream to Remember: Continual Steering of Generalist Robot Policies with World Models

Abstract

Generalist robot policies are trained with imitation learning and are bounded by the quality and coverage of their demonstrations. Reinforcement learning can improve and extend them, either by fine-tuning the policy weights or by training a small module to steer the input noise of a frozen generative policy. When tasks arrive sequentially, both approaches suffer from catastrophic forgetting. Fine-tuning on a task degrades prior tasks, and steering only shifts forgetting to the shared steering module. We propose Dream to Remember (D2R), which continually steers a frozen generalist policy toward new tasks, while retaining its earlier skills. As the steering module learns a new task, a frozen pretrained world model rehearses prior tasks through imagined rollouts, anchoring the module to its earlier behavior without a replay buffer or new data. When the world model is faithful enough, D2R learns the new task entirely in imagination. Otherwise, it learns the task in the environment while using the world model only to rehearse prior tasks. On CALVIN, D2R improves eight tasks in sequence entirely in imagination, raising average success from 63.7% to 74.8%, while LoRA fine-tuning on the same sequence drops it to 11.7%. With a frozen off-the-shelf generalist policy and world model, $π_0$ and A2World, D2R learns unseen LIBERO-90 tasks in the environment while keeping $π_0$'s performance on the LIBERO suites it was fine-tuned on, even though the world model is not accurate enough for policy optimization. Finally, on a real Franka robot, D2R improves three tasks in sequence entirely in imagination while retaining the earlier improvements.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Bahey Tharwat, Iman Nematollahi, Marvin Alles, Xingyuan Zhang, Akshay L Chandra, Abhinav Valada. 2026-10-09. Dream to Remember: Continual Steering of Generalist Robot Policies with World Models. https://arxiv.org/abs/2610.13816

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Development of a Low-Cost Prosthetic Hand Using Electromyography and Machine Learning

Electromyography (EMG) is a measure of muscular electrical activity and is used in many clinical/biomedical disciplines and modern human computer interaction. Myo-electric prosthetics analyze and classify the electrical signals recorded from the residual limb. The classified output is then used to control the position of motors in a robotic hand and a movement is produced. The aim of this project is to develop a low-cost and effective myo-electric prosthetic hand that would meet the needs of amputees in developing countries. The proposed prosthetic hand should be able to accurately classify five different patterns (gestures) using EMG recordings from three muscles and control a robotic hand accordingly. The robotic hand is composed of two servo motors allowing for two degrees of freedom. After establishing an efficient signal acquisition and amplification system, EMG signals were thoroughly analyzed in the frequency and time domains. Features were extracted from both domains and a shallow neural network was trained on the two sets of data. Results yielded an average classification accuracy of 94.8% and 93.2% for the time and frequency domains respectively. Furthermore, results showed a faster computation and response for the time domain analysis; hence, it was adopted for the classification system. A wrist rotation mechanism was designed and tested to add significant functionality to the prosthetic. The mechanism is controlled by two of the five gestures, one for each direction. Which added a third degree of freedom to the overall design. Finally, a tactile sensory feedback system which uses force sensors and vibration motors was developed to enable sensation of the force inflicted on the hand for the user.

cs.RO↗

Injecting Hallucinations in Autonomous Vehicles: A Component-Agnostic Safety Evaluation Framework

Perception failures in autonomous vehicles (AV) remain a major safety concern because they can directly compromise decision-making and contribute to unsafe behavior. To study how these failures affect safety, researchers typically inject artificial faults into real-world or simulated components and observe the resulting outcomes. However, existing fault injection (FI) studies often target a single sensor within the machine perception (MP) module, resulting in siloed frameworks that are difficult to generalize or integrate into unified simulation environments. This work addresses that limitation by reframing perception failures as hallucinations, that is, false perceptions that distort an AV's situational awareness and may trigger unsafe control actions. Building on this concept, we propose a configurable, component-agnostic hallucination injection framework that induces six plausible hallucination types in an open-source simulation environment. A total of 18,356 simulations (8,695 baseline and 9,661 with hallucinations injected) were executed while AVs crossed an unsignalized intersection with transversal traffic. The results statistically validate the framework and quantify the impact of each hallucination type on collisions and on the minimum distance between the AV and the nearest vehicle, used as a continuous proxy for the safety margin. Certain hallucinations, especially missed detection, blind region, angular drift, phantom perception, and latency, significantly increase the odds of collision, while linear drift significantly reduces minimum distances without producing a statistically significant increase in collision odds in the evaluated scenario. The proposed framework provides a scalable and statistically grounded method for evaluating AV safety under perception distortions and supports future research on fault tolerance and resilient AV design.

cs.RO↗

DeFM: Learning Foundation Representations from Depth for Robotics

Depth sensors are widely deployed across robotic platforms, and advances in fast, high-fidelity depth simulation have enabled robotic policies trained on depth observations to achieve robust sim-to-real transfer for a wide range of tasks. Despite this, representation learning for depth modality remains underexplored compared to RGB, where large-scale foundation models now define the state of the art. To address this gap, we present DeFM, a self-supervised foundation model trained entirely on depth images for robotic applications. Using a DINO-style self-distillation objective on a curated dataset of 60M depth images, DeFM learns geometric and semantic representations that generalize to diverse environments, tasks, and sensors. To retain metric awareness across multiple scales, we introduce a novel input normalization strategy. We further distill DeFM into compact models suitable for resource-constrained robotic systems. When evaluated on depth-based classification, segmentation, navigation, locomotion, and manipulation benchmarks, DeFM achieves state-of-the-art performance and demonstrates strong generalization from simulation to real-world environments. We release all our pretrained models, which can be adopted off-the-shelf for depth-based robotic learning without task-specific fine-tuning. Webpage: https://de-fm.github.io/

cs.RO↗