Searcharxiv⌕ Search

arXiv · 2610.28876

Microlens-Integrated Grating Couplers for Efficient Free-Space Coupling in Silicon Photonics

Abstract

Grating-coupler arrays are used to couple free-space light into photonic chips, but the space required for tapers and routing waveguides limits their optical fill factor. Microlens arrays can increase the effective fill factor by collecting light over a larger area and focusing it onto each grating. Separately fabricated lens arrays, however, require assembly and precise alignment to the chip. Here we integrate refractive microlenses directly with high-efficiency, normal-incidence grating couplers using two-photon polymerization. Each lens has a 100 x 100 um2 aperture and focuses incident light onto the grating. Writing the lens body at coarse resolution and the optical surface at fine resolution reduces the print time from 9 h to 19 min per lens. Under illumination by a Gaussian beam with a 276 um mode-field diameter, a printed lens increases the measured coupled power by a factor of 33 (15.2 dB) relative to the same grating before printing. Loss normalization gives an estimated lens-to-mode efficiency of 68%. The lenses show no measurable change in coupling after three 3 h thermal cycles at 150C. These results support direct printing as an approach to increasing free-space collection while simplifying lens integration in photonic systems.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Simon A. Bongarz, Ryosuke Mashiko, Anne R. Kroo, Jaekwon Lee, Carson G. Valdez, David A. B. Miller, Olav Solgaard. 2026-10-20. Microlens-Integrated Grating Couplers for Efficient Free-Space Coupling in Silicon Photonics. https://arxiv.org/abs/2610.28876

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Emergent Non-Equilibrium Emission Profiles via Luminescent Angle Restriction for Photovoltaic Energy Conversion

The detailed-balance method determines photovoltaic conversion efficiencies by relating non-equilibrium converter operation to an equilibrium reference state. Conventionally, the angular and spectral radiative channels are assumed to be defined by the equilibrium absorptivity and emissivity, with the photon chemical potential setting their occupation. The spatial distribution of emission must also be considered when radiative energy is redistributed within a complex nanophotonic converter architecture. Here we analyze this redistribution with a proposed luminescent angle restrictor, in which a flat-plate photovoltaic absorber is coupled to an overlayer with vertically aligned nanorods. The nanorod layer is nearly transparent to near-normal sunlight, while oblique photovoltaic luminescence can be absorbed, re-emitted, and partially returned to the absorber. To calculate the operating emission profile, we develop a Markov-chain transport model with an absorbing-chain formulation that enforces microscopic reversibility for local optical transitions while determining the spatially distributed steady-state emission rates. The model recovers the flat-plate detailed-balance limit and predicts voltage-dependent external emission profiles from the coupled architecture. Under idealized conditions, this non-equilibrium angular redistribution increases conversion efficiency relative to the conventional flat-plate reference. We further evaluate nanorod photoluminescence quantum yield, angular restriction, orientational disorder, and Auger recombination to identify practical constraints on the proposed architecture. These results show how detailed-balance limits for photovoltaic structures can depend on internal radiative energy redistribution and the resulting non-equilibrium emission profile, beyond what can be inferred from the macroscopic equilibrium optical response alone.

physics.optics↗

Undulating Diamond Photonic Crystal in the Royal Jewel Butterfly: Circumventing Refractive Index Limits to Defy Iridescence

The modest refractive-indices of biomolecules place fundamental constraints on the optical performance of natural photonic organisms. To overcome this limitation, organisms reshape basic optical structures into hierarchical architectures, exhibiting performance rivals that of high-index materials. Here we show how the Royal Jewel butterfly (Hypochrysops polycletus) employs such a strategy to circumvent the low refractive-index of chitin to achieve an unusual combination of intense structural colouration and remarkably weak angular dependence. A single-diamond photonic crystal, which was hailed as the 'holy grail' and documented only in beetles and weevils, has now been discovered in the butterfly. It deforms into a hierarchically undulated superstructure guided by basal lamina and correlated with quasi-twinning boundaries with mirror symmetry. The scale surface is thus fully terminated by inclined {111} facets essential for fundamental bandgap, producing bright specular Bragg reflection at intermediate to high angles and low-angle radiation enabled by simultaneously coupling localised resonances populated through anisotropic Bloch transport, thereby transforming an otherwise strongly angle-dependent photonic crystal into a vivid, angle-robust optical structure. Following this optical concept, an artificially angle-insensitive optical prototype was fabricated through two-photon polymerisation, validating the mechanism as a transferable design principle at the intersection of fundamental nanophotonics and bio-inspired engineering.

physics.optics↗

Observation of pseudospin-locked chiral edge transport in gyromagnetic photonic crystals

Photonic pseudospins enable selective excitation and routing of light, but perturbations that mix opposite pseudospins can induce backscattering in helical edge channels. Here, we experimentally demonstrate pseudospin-locked chiral edge transport in gyromagnetic photonic crystals, combining pseudospin selectivity with nonreciprocal unidirectional propagation. By jointly engineering lattice deformation and magnetic bias, we control dipolar-quadrupolar band inversions and construct interfaces supporting pseudospin-selective chiral channels. Microwave near-field and transmission measurements reveal a single chiral edge branch that is selectively excited by only one source handedness and exhibits pronounced nonreciprocal transport. Extending this mechanism to multidomain structures, we combine two pseudospin channels into a common waveguide, separate them into distinct outputs, and route them through intersecting interfaces. These configurations realize a nonreciprocal photonic pseudospin multiplexer and demultiplexer, together with a waveguide crossing exhibiting average measured crosstalk of -14.1 and -15.8 dB for its two input channels. Our results present an experimental route to integrating pseudospin-selective channel control with chiral edge transport, providing a foundation for nonreciprocal photonic networks that use pseudospin to organize and route multiple wave channels.

physics.optics↗