Searcharxiv⌕ Search

arXiv subjects

Olav Solgaard

Publications and source records attributed to Olav Solgaard.

At least 19 recordsLinked to original sources

Reconfigurable Free-Space Optical Interconnects

Free-space optical interconnects can support many low-data-rate channels while avoiding the cost, energy consumption, and packaging constraints of optical waveguide- or fiber-based systems that are widely used today. We propose a free-space optical interconnect system based on reconfigurable micromirror arrays, and show that it scales favorably due to its two-dimensional scaling. We discuss the channel count scaling model, compare our demonstration with theory, and project a channel count above 10,000 to achieve 100 Tbps with slow channels (e.g., <10 Gbps). In a proof-of-concept system with a piston-motion micromirror array, we demonstrate nine channels that are simultaneously optimized. The optimization enables -21.7 dB of average worst-case crosstalk for a channel pitch equal to twice the beam radius, a smaller channel spacing than that required in flat tip-tilt mirrors. The optimization flow is further investigated for different channel spacings, simultaneous illumination, and different numbers of outputs, which generally achieve smaller worst-case crosstalk than the flat tip-tilt mirror case. Overall, the work demonstrates the advantage of piston-motion micromirrors in the proposed optical interconnects.

physics.optics↗

Microlens-Integrated Grating Couplers for Efficient Free-Space Coupling in Silicon Photonics

Grating-coupler arrays are used to couple free-space light into photonic chips, but the space required for tapers and routing waveguides limits their optical fill factor. Microlens arrays can increase the effective fill factor by collecting light over a larger area and focusing it onto each grating. Separately fabricated lens arrays, however, require assembly and precise alignment to the chip. Here we integrate refractive microlenses directly with high-efficiency, normal-incidence grating couplers using two-photon polymerization. Each lens has a 100 x 100 um2 aperture and focuses incident light onto the grating. Writing the lens body at coarse resolution and the optical surface at fine resolution reduces the print time from 9 h to 19 min per lens. Under illumination by a Gaussian beam with a 276 um mode-field diameter, a printed lens increases the measured coupled power by a factor of 33 (15.2 dB) relative to the same grating before printing. Loss normalization gives an estimated lens-to-mode efficiency of 68%. The lenses show no measurable change in coupling after three 3 h thermal cycles at 150C. These results support direct printing as an approach to increasing free-space collection while simplifying lens integration in photonic systems.

physics.optics↗

Polarization vector conjugation in a photonic integrated circuit

We show how to perform polarization conjugation of light in a simple apparatus without any nonlinear optical materials, based on self-configuring Mach-Zehnder interferometers fed by a polarization splitter. This allows us to completely and automatically remove the polarization variations on a single beam or mode propagating through an optical system with arbitrary birefringence, such as a conventional optical fiber, and compensate polarization variations experienced in the forward direction by propagating the conjugated beam back through the system and recreating the original polarization at the source. We demonstrate this polarization conjugation in an optical fiber setup in different orientations with a measured polarization extinction ratio of -30 dB for the returned beam.

physics.optics↗

Separating partially coherent light

Recent advances in optical imaging and communication increasingly involve high-dimensional, partially coherent light, creating a growing need for scalable tools to measure and manipulate coherence. Here, we demonstrate the automatic separation of spatially partially coherent light into "coherence modes" -- its orthogonal and mutually incoherent components. To make this separation possible, we exploit variational processing in layered self-configuring interferometer architectures in a silicon photonic circuit. This process formally finds and measures the eigenvectors and eigenvalues of the coherency matrix, hence measuring the partially coherent state, while leaving it intact and separated after optimization. Furthermore, we show that mutually incoherent beams, if spatially orthogonal, can be automatically separated even if they are completely overlapped, hence separating unknown laser beams based only on their mutual incoherence. Our experiment finds and separates the two strongest coherence modes starting from a nine-mode sampling of the partially or fully overlapping fields from two independent lasers. The method requires a number of physical components that scales linearly with the rank $r$ of the coherency matrix and operates through a sequence of $r$ in situ gradient-based optimizations enabled by electronic drive frequency multiplexing of interferometer phase shifters. We benchmark its performance against a mixture-based tomographic method, also implemented on chip. These results establish a scalable framework for programmable coherence analysis and control in imaging, communication, and photonic information processing.

physics.optics↗

Integrated Photonic Polarization Synthesizer and Analyzer

Polarization-resolved control and measurement of the optical field are essential for a wide range of photonic systems, including coherent communication, polarimetric sensing, and quantum information processing. We present a photonic integrated circuit that enables the generation and analysis of arbitrary polarization states. The device provides reconfigurable access to the full polarization degree of freedom of coherent light within a single integrated platform. We experimentally demonstrate arbitrary polarization state generation spanning the Poincare sphere, as well as Stokes vector measurement on chip. Unlike conventional Stokes measurements that rely on direct detection, polarization analysis utilizing this architecture is intrinsically non-destructive, preserving the optical signal for further optical domain processing. The devices are fabricated in a commercial foundry using CMOS-compatible processes, enabling scalable and reproducible integration. By combining polarization generation and analysis in a compact and stable photonic circuit, this work eliminates the need for external polarization optics and provides a foundation for robust, polarization-enabled photonic integrated systems.

physics.optics↗

A general framework for interactions between electron beams and quantum optical systems

We provide a theoretical framework to describe the dynamics of a free-electron beam interacting with quantized bound systems in arbitrary electromagnetic environments. This expands the quantum optics toolbox to incorporate free-electron beams for applications in highly tunable quantum control, imaging, and spectroscopy at the nanoscale. The framework recovers previously studied results and shows that electromagnetic environments can amplify the intrinsically weak coupling between a free-electron and a bound electron to reach previously inaccessible interaction regimes. We leverage this enhanced coupling for experimentally feasible protocols in coherent qubit control and towards the nondestructive readout and projective control of the electron beam's quantum-number statistics. Our framework is broadly applicable to microwave-frequency qubits, optical nanophotonics, cavity quantum electrodynamics, and emerging platforms at the interface of electron microscopy and quantum information.

quant-ph↗

Programmable Optical Filters Based on Feed-Forward Photonic Meshes

We demonstrate an integrated photonic circuit based on feed forward photonic meshes that can be programmed and reconfigured to perform arbitrary spectral filter functions. We investigate a subset of the available filter functions, demonstrating that a N = 4 input triangular mesh with M = 3 layers may be operated via self-configuration algorithms to filter M arbitrary wavelengths from a given input spectrum. The tunable nature of the architecture enables preconfigured filter functions to be swept in the spectral domain continuously over the free spectral range of the device. This removes any strict requirements between the design parameters of the architecture and the center wavelength of a desired filter function. With this architecture, we experimentally demonstrate arbitrary wavelength rejection filters with contrasts as deep as 40 dB. Further, by intentionally selecting the center wavelengths of each filter function to lie along a wavelength grid we demonstrate deep wavelength division demultiplexing (DWDM) with inter-channel crosstalk between -25 dB and -40 dB. Unlike typical DWDM systems, in this architecture the center wavelength of each channel is not fixed at fabrication and instead may be swept or reordered arbitrarily. This device demonstrates advantages over typical methods for DWDM, Raman spectroscopy, and correlation spectroscopy as well as other applications.

physics.optics↗

Three-Wave Interaction Grating Coupler with Sub-Decibel Insertion Loss at Normal Incidence

We report the design, fabrication in a commercial foundry, and experimental results of high-efficiency, normal incidence grating couplers for silicon photonics. We observe a maximum coupling efficiency of 85.4% (-0.69 dB) with a 1 dB bandwidth of 20 nm at a central wavelength of 1546 nm. These experimental results verify earlier theoretical and simulation results and pave the way for the use of perfectly vertical grating couplers, as an alternative to edge coupling, in silicon photonics applications that are sensitive to input coupling loss. Further, these results enable the use of grating couplers for vertically oriented elements, such as multicore fibers and VCSELs, and address challenges associated with coupling to free space beams.

physics.optics↗

Diffractive Retroreflector for Distributed Sensing

We introduce a modified corner cube reflector that encodes information from passive optical sensors in its retroreflected diffraction pattern, enabling remote sensor-state measurement over a single-ended optical link. The design interferes a reference path and a sensor-modulated path within the retroreflected beam to produce an interferometric signal suitable for reading out phase and amplitude variations with a squarelaw camera. This enables sensor-state determination in arbitrarily oriented passive nodes, extending coherent interferometric read out of chemical, biological, and physical sensors to scalable, robust, and inert field deployments.

physics.optics↗

Quantum sensing of electron beams using solid-state spins

Scattering experiments with energetic particles, such as free electrons, have been historically used to reveal the quantum structure of matter. However, realizing coherent interactions between free-electron beams and solid-state quantum systems has remained out of reach, owing to their intrinsically weak coupling. Realizing such coherent control would open up opportunities for hybrid quantum platforms combining free electrons and solid-state qubits for coincident quantum information processing and nanoscale sensing. Here, we present a framework that employs negatively charged nitrogen-vacancy centers (NV-) in diamond as quantum sensors of a bunched electron beam. We develop a Lindblad master equation description of the magnetic free-electron--qubit interactions and identify spin relaxometry as a sensitive probe of the interaction. Experimentally, we integrate a confocal fluorescence microscopy setup into a microwave-bunched electron beam line. We monitor charge-state dynamics and assess their impact on key sensing performance metrics (such as spin readout contrast), defining safe operating parameters for quantum sensing experiments. By performing $T_1$ relaxometry under controlled electron beam exposure, we establish an upper bound on the free-electron--spin coupling strength. Our results establish NV- centers as quantitative probes of free electrons, providing a metrological benchmark for free-electron--qubit coupling under realistic conditions, and chart a route toward solid-state quantum control with electron beams.

quant-ph↗

On-Chip Laser-Driven Free-Electron Spin Polarizer

Spin-polarized electron beam sources enable studies of spin-dependent electric and magnetic effects at the nanoscale. We propose a method of creating spin-polarized electrons on an integrated photonics chip by laser driven nanophotonic fields. A two-stage interaction separated by a free space drift length is proposed, where the first stage and drift length introduces spin-dependent characteristics into the probability distribution of the electron wavefunction. The second stage uses an adjusted optical near-field to rotate the spin states utilizing the spin-dependent wavepacket distribution to produce electrons with high ensemble average spin expectation values. This platform provides an integrated and compact method to generate spin-polarized electrons, implementable with millimeter scale chips and table-top lasers.

quant-ph↗

High Contrast Nulling in Photonic Meshes Through Architectural Redundancy

We demonstrate a silicon photonic architecture comprised of Double Mach-Zehnder Interferometers (DMZIs) designed for high-contrast photonic applications. This configuration significantly enhances the achievable extinction ratio of photonic integrated circuits (PICs), reaching levels exceeding 80 dB. By leveraging the tunable properties of DMZIs and implementing a systematic configuration algorithm, the proposed mesh effectively compensates for fabrication imperfections and mitigates non-idealities such as back reflections. Experimental validation on a silicon-on-insulator platform demonstrates the potential of this approach for applications requiring high contrast nulling such as astronomical sensing.

physics.optics↗

Universal programmable and self-configuring optical filter

We propose an approach to integrated optical spectral filtering that allows arbitrary programmability, can compensate automatically for imperfections in filter fabrication, allows multiple simultaneous and separately programmable filter functions on the same input, and can configure itself automatically to the problem of interest, for example to filter or reject multiple arbitrarily chosen frequencies. The approach exploits splitting the input light into an array of multiple waveguides of different lengths that then feed a programmable interferometer array that can also self-configure. It can give spectral response similar to arrayed waveguide gratings but offers many other filtering functions, as well as supporting other structures based on non-redundant arrays for precise spectral filtering. Simultaneous filtering also allows, for the first time to our knowledge, an automatic measurement of the temporal coherency matrix and physical separation into the Karhunen-Loève expansion of temporally partially coherent light fields.

physics.optics↗

Subrelativistic Alternating Phase Focusing Dielectric Laser Accelerators

We demonstrate a silicon-based electron accelerator that uses laser optical near fields to both accelerate and confine electrons over extended distances. Two dielectric laser accelerator (DLA) designs were tested, each consisting of two arrays of silicon pillars pumped symmetrically by pulse front tilted laser beams, designed for average acceleration gradients 35 and 50 MeV/m respectively. The DLAs are designed to act as alternating phase focusing (APF) lattices, where electrons, depending on the electron-laser interaction phase, will alternate between opposing longitudinal and transverse focusing and defocusing forces. By incorporating fractional period drift sections that alter the synchronous phase between $\pm 60^\circ$ off crest, electrons captured in the designed acceleration bucket experience half the peak gradient as average gradient while also experiencing strong confinement forces that enable long interaction lengths. We demonstrate APF accelerators with interaction lengths up to 708 $μ$m and energy gains up to 23.7 $\pm$ 1.07 keV FWHM, a 25$\%$ increase from starting energy, demonstrating the ability to achieve substantial energy gains with subrelativistic DLA.

physics.acc-ph↗

Scalable Low-latency Optical Phase Sensor Array

Optical phase measurement is critical for many applications and traditional approaches often suffer from mechanical instability, temporal latency, and computational complexity. In this paper, we describe compact phase sensor arrays based on integrated photonics, which enable accurate and scalable reference-free phase sensing in a few measurement steps. This is achieved by connecting multiple two-port phase sensors into a graph to measure relative phases between neighboring and distant spatial locations. We propose an efficient post-processing algorithm, as well as circuit design rules to reduce random and biased error accumulations. We demonstrate the effectiveness of our system in both simulations and experiments with photonic integrated circuits. The proposed system measures the optical phase directly without the need for external references or spatial light modulators, thus providing significant benefits for applications including microscope imaging and optical phased arrays.

physics.optics↗

Immersion graded index optics: theory, design, and prototypes

Immersion optics enable creation of systems with improved optical concentration and coupling by taking advantage of the fact that the luminance of light is proportional to the square of the refractive index in a lossless optical system. Immersion graded index optical concentrators, that do not need to track the source, are described in terms of theory, simulations, and experiments. We introduce a generalized design guide equation which follows the Pareto function and can be used to create various immersion graded index optics depending on the application requirements of concentration, refractive index, height, and efficiency. We present glass and polymer fabrication techniques for creating broadband transparent graded index materials with large refractive index ranges, (refractive index ratio)^2 of ~2, going many fold beyond what is seen in nature or the optics industry. The prototypes demonstrate 3x optical concentration with over 90% efficiency. We report via functional prototypes that graded-index-lens concentrators perform close to the theoretical maximum limit and we introduce simple, inexpensive, design-flexible, and scalable fabrication techniques for their implementation.

physics.optics↗

Scalable and self-correcting photonic computation using balanced photonic binary tree cascades

Programmable unitary photonic networks that interfere hundreds of modes are emerging as a key technology in energy-efficient sensing, machine learning, cryptography, and linear optical quantum computing applications. In this work, we establish a theoretical framework to quantify error tolerance and scalability in a more general class of "binary tree cascade'' programmable photonic networks that accept up to tens of thousands of discrete input modes $N$. To justify this scalability claim, we derive error tolerance and configuration time that scale with $\log_2 N$ for balanced trees versus $N$ in unbalanced trees, despite the same number of total components. Specifically, we use second-order perturbation theory to compute phase sensitivity in each waveguide of balanced and unbalanced networks, and we compute the statistics of the sensitivity given random input vectors. We also evaluate such networks after they self-correct, or self-configure, themselves for errors in the circuit due to fabrication error and environmental drift. Our findings have important implications for scaling photonic circuits to much larger circuit sizes; this scaling is particularly critical for applications such as principal component analysis and fast Fourier transforms, which are important algorithms for machine learning and signal processing.

physics.optics↗

Experimental evaluation of digitally-verifiable photonic computing for blockchain and cryptocurrency

As blockchain technology and cryptocurrency become increasingly mainstream, ever-increasing energy costs required to maintain the computational power running these decentralized platforms create a market for more energy-efficient hardware. Photonic cryptographic hash functions, which use photonic integrated circuits to accelerate computation, promise energy efficiency for verifying transactions and mining in a cryptonetwork. Like many analog computing approaches, however, current proposals for photonic cryptographic hash functions that promise similar security guarantees as Bitcoin are susceptible to systematic error, so multiple devices may not reach a consensus on computation despite high numerical precision (associated with low photodetector noise). In this paper, we theoretically and experimentally demonstrate that a more general family of robust discrete analog cryptographic hash functions, which we introduce as LightHash, leverages integer matrix-vector operations on photonic mesh networks of interferometers. The difficulty of LightHash can be adjusted to be sufficiently tolerant to systematic error (calibration error, loss error, coupling error, and phase error) and preserve inherent security guarantees present in the Bitcoin protocol. Finally, going beyond our proof-of-concept, we define a ``photonic advantage'' criterion and justify how recent developments in CMOS optoelectronics (including analog-digital conversion) provably achieve such advantage for robust and digitally-verifiable photonic computing and ultimately generate a new market for decentralized photonic technology.

cs.ET↗