Searcharxiv⌕ Search

arXiv · 2611.04424

ReflexArc: Bottom-Up Integration of Instantaneous Tactile Reflexes into Whole-Body Humanoid Control

Abstract

Humanoid robots operating in cluttered environments must react to unexpected contacts before the first impact peak, which arrives within tens of milliseconds. Learned whole-body policies running at 50 Hz introduce a policy-cycle delay and may suppress a protective withdrawal as a tracking error. To address these challenges, we propose ARC (Ascending Reflex Control), a bottom-up framework that integrates instantaneous tactile reflexes with learned whole-body control. ARC consists of two components: an instantaneous reflex pathway and bottom-up reflex integration. The reflex pathway detects hazardous contacts from full-body tactile sensing, solves a whole-body withdrawal pose, and delivers it directly to the motors within 10 ms. Bottom-up reflex integration combines reflex-in-the-loop policy learning, reflex-transparent policy alignment, and reflex-informed policy adaptation to sustain the withdrawal, maintain balance, and complete longer-horizon recovery. We deploy ARC on a Unitree G1 and evaluate three categories of hazardous contact. Compared with an otherwise identical reflex delayed by 20 ms, ARC reduces the first force peak by 34.1% and reduces the contact impulse from 0.2632 N s to 0.1225 N s (a 2.15x ratio). We further demonstrate protected motion tracking, teleoperation, and vision-free obstacle traversal guided by foot tactile sensing. Project page: https://minusmodulo.github.io/reflexarc-website/

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mingyu Wang, Si Li, Ziqing Chen, He Wang, Li Yi. 2026-11-03. ReflexArc: Bottom-Up Integration of Instantaneous Tactile Reflexes into Whole-Body Humanoid Control. https://arxiv.org/abs/2611.04424

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Design of an Underwater Vehicle With Orientation-Adjustable Thrusters and Adaptive Tracking Control

Unmanned underwater vehicles (UUVs) are essential for marine exploration and research. However, conventional designs often struggle with limited maneuverability in complex and dynamic underwater environments. This paper presents an orientation-adjustable thruster UUV (OAT-UUV) with vector thrusters, enabling full six-degree-of-freedom (6-DOF) motion. and composite maneuvers. To overcome challenges associated with uncertain model parameters and environmental disturbances, a vision-based tracking control system based on a novel feedforward adaptive model predictive controller (FF-AMPC) is proposed to achieve robust object tracking, which integrates realtime state feedback with adaptive parameter updating. Extensive experiments, including closed-loop tracking and composite motion tests in real-world environment, have been conducted. The obtained results demonstrate that the orientation-adjustable propulsion design significantly improves the underwater maneuverability, while the FF-AMPC controller achieves a 49.1% hovering improvement compared to conventional controller.

cs.RO↗

FlowDrive: moderated flow matching with data balancing for trajectory planning

Learning-based planners are sensitive to the long-tailed distribution of driving data. Common maneuvers dominate datasets, while dangerous or rare scenarios are sparse. This imbalance can bias models toward the frequent cases and degrade performance on critical scenarios. To tackle this problem, we compare balancing strategies for sampling training data and find reweighting by trajectory pattern an effective approach. We then present FlowDrive, a flow-matching trajectory planner that learns a conditional rectified flow to map noise directly to trajectory distributions with few flow-matching steps. We further introduce moderated, in-the-loop guidance that injects small perturbation between flow steps to systematically increase trajectory diversity while remaining scene-consistent. On nuPlan and the interaction-focused interPlan benchmarks, FlowDrive achieves state-of-the-art results among learning-based planners and approaches methods with rule-based refinements. After adding moderated guidance and light post-processing (FlowDrive*), it achieves overall state-of-the-art performance across nearly all benchmark splits. Our code is available at https://github.com/einsteinguang/flow_drive_planner.

cs.RO↗

DexCanvas: Bridging Human Demonstrations and Robot Learning for Dexterous Manipulation

A dexterous hand succeeds or fails through contact, yet every scalable record of human manipulation (video, vision-based hand tracking, motion capture) observes how the hand moves and misses how it pushes. We present DexCanvas, a hybrid real-synthetic dataset of 7,000 hours of dexterous hand-object interaction with per-frame contact points and contact forces, grown from 70 hours of optical motion capture that spans 21 manipulation types, from power and precision grasps to in-hand manipulation. The forces come from a real-to-sim pipeline: one reinforcement learning (RL) policy, conditioned on object geometry and manipulation type, drives an actuated MANO hand in physics simulation to reproduce each captured object trajectory, and the simulator measures the contacts that produce the reproduced motion. The policy reproduces 87.5% of the demonstrations and still succeeds on 80.9% of rollouts from perturbed initial object poses; these perturbed rollouts expand the 70 captured hours a hundredfold. On six YCB objects absent from the capture set it succeeds 72.5% of the time. The contact channels make better policies: a Diffusion Policy that observes DexCanvas contact features succeeds 82.2% of the time, against 67.5% without them, over 18,522 trials. Contact-driven retargeting carries the same demonstrations to two dexterous robot hands, where the RL stage again produces stable rollouts. A first release of 111,857 force-annotated trajectories is publicly available on Hugging Face.

cs.RO↗