Searcharxiv⌕ Search

arXiv · 2611.15045

Affine Frequency Division Multiplexing With Pre-Chirp Spreading Index Modulation: A CSI-Driven Secure Transmission Framework

Abstract

The flexible configurability of pre-chirp parameters in affine frequency division multiplexing (AFDM) provides new degrees of freedom for designing covert communication mechanisms. Leveraging this property, this paper proposes a covert AFDM pre-chirp spreading index modulation (IM) framework referred to as AFDM-PCS-IM, tailored for high-mobility scenarios. Specifically, an orthogonal pre-chirp parameter codebook is constructed by exploiting the tunability of the pre-chirp parameters. To enhance covertness, the legitimate channel state information (CSI) is utilized to generate controlled perturbations that encrypt the codebook, thereby tightly coupling the modulation structure with instantaneous channel characteristics. The encrypted pre-chirp codebook is then employed as an IM dimension for information transmission, where the index bits are conveyed through the selection of pre-chirp parameter sequences. Since eavesdroppers cannot obtain consistent CSI, they are unable to reconstruct the encrypted codebook and thus cannot reliably recover any useful information. Moreover, to address channel estimation errors inherent in practical communication environments, a noise-aware CSI quantizer is further introduced to improve robustness under imperfect CSI conditions. Finally, a low-complexity two-layer message passing detector with Walsh code constraints (TLMP-WC) is developed to enable efficient large-scale data detection while simultaneously enhancing the detection reliability. Simulation results demonstrate that the proposed AFDM-PCS-IM framework with the TLMP-WC detector achieves superior covertness, improved bit error rate (BER) performance, and reduced computational complexity compared with the state-of-the-art schemes.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Yiwei Tao, Miaowen Wen, Yao Ge, Merouane Debbah, Erdal Panayirci. 2026-11-11. Affine Frequency Division Multiplexing With Pre-Chirp Spreading Index Modulation: A CSI-Driven Secure Transmission Framework. https://searcharxiv.com/abs/2611.15045

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite Searcharxiv by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related papers

Joint BS Deployment and Power Optimization for Minimum EMF Exposure with RL in Real-World Based Urban Scenario

Base station (BS) deployment remains a critical task with successive wireless communication generations and increasing data rates demands, while the electromagnetic field (EMF) exposure is often underrated. Therefore, this paper proposes a workflow that adjusts BS deployment and radiated power in a 3D urban scenario to jointly consider EMF exposure and coverage. To achieve this ambition, firstly, a novel least-time shoot-and-bounce ray (SBR) ray-launching (RL) tool is developed to improve computational efficiency, and simultaneously enhance diffraction modeling for accurate EMF exposure calculation, validated with real-world measurements. To efficiently extend the computation across the target urban area, the adaptive grid refinement (AGR) algorithm is designed based on the spatial stability of the effective channel while accounting for BS beamforming. Subsequently, to provide a more comprehensive evaluation of EMF exposure under practical network operations, a system-level abstraction further accounts for the actual maximum transmit power, intercell interference, and channel state information imperfection on the BS side, while capturing mobility over the EMF exposure averaging interval on the user equipment side. Upon the aforementioned aspects, the coverage-guaranteed EMF exposure minimization problem is formulated in a realistic and accurate manner, and solved by a geometry-aware algorithm that enables joint BS deployment and power optimization based on deterministic channel simulations under practical deployment constraints, completing the proposed workflow. Simulation results illustrate the application of the workflow in the considered urban scenario, while comparison with an empirical baseline highlights that the workflow mitigates EMF exposure underestimation and yields BS deployment configurations better aligned with real-world conditions.

eess.SP↗

From High-Level Communication Requirements to KPIs via Conformal Signal Temporal Logic Learning

Softwarized radio access networks (RANs), such as those based on the Open RAN (O-RAN) architecture, generate rich streams of key performance indicators (KPIs) that can be leveraged to extract actionable intelligence for network optimization. However, bridging the gap between low-level KPI measurements and high-level requirements, such as quality of experience (QoE), requires methods that are both relevant, capturing temporal patterns predictive of user-level outcomes, and interpretable, providing human-readable insights that operators can validate and act upon. This paper introduces conformal signal temporal logic learning (C-STLL), a framework that addresses both requirements. C-STLL leverages signal temporal logic (STL), a formal language for specifying temporal properties of time series, to learn from data interpretable formulas that characterize key properties of KPI traces satisfying high-level requirements. We first formulate the problem of reliably identifying an accurate STL formula as a risk-averse inference problem. We show that the optimal solution requires the construction of a set of STL formulas with formal coverage guarantees. Based on this theoretical insight, the proposed C-STLL extracts from calibration data a set of STL formulas with such guarantees via Learn Then Test, while also filtering for formula complexity and diversity. Experiments on a mobile gaming scenario in ns-3 and on KPI traces measured on a softwarized RAN testbed demonstrate that C-STLL effectively controls risk below target levels, while returning interpretable temporal specifications that relate KPI behavior to QoE outcomes.

eess.SP↗

Joint Synchronization and Radar Parameter Estimation for OFDM-based DISAC Systems

We propose a novel approach to the synchronization paradigm in distributed ISAC (DISAC) systems in doubly-dispersive (DD) channel environments via a joint synchronization and radar parameter estimation framework. The proposed method exploits the structure of the system model, which can be linearized in order to apply a bivariate Gaussian belief propagation (GaBP) algorithm that jointly estimates the time offset (TO) and carrier frequency offset (CFO) of each base station (BS), as well as the delay and Doppler parameters of the DD channel in conventional orthogonal frequency division multiplexing (OFDM) systems. Simulation results demonstrate the effectiveness of the proposed algorithm, showing that the radar parameter estimates (i.e., range and velocity) and synchronization parameter estimates (i.e., TO and CFO) approach the Cramér Rao lower bound (CRLB) even at moderate-to-high signal-to-noise ratio (SNR) regimes.

eess.SP↗