Searcharxiv⌕ Search

arXiv · 2611.22753

Improved compensation for missing high-order aberrations with multi-frame blind deconvolution and phase diversity techniques

Abstract

Context. Image restoration with phase diversity (PD) and multi-frame blind deconvolution (MFBD) techniques lead to remarkable improvement in image quality, but is limited by the number of aberration parameters that can be determined. Compensation for the missing high-order modes is needed to further improve image quality, and to compensate for residual straylight. Aims. We aim to improve on methods for compensating missing high-order aberrations previously proposed by Scharmer et al. (2010) and Lofdahl & Hillberg (2022). Methods. The wavefront is divided into a set of low-order aberrations, which are treated individually, and high-order aberrations that are treated collectively. The high-order part of the transfer function is averaged, assuming Gaussian seeing statistics with Kolmogorov turbulence for the individual aberrations. Assuming that their accumulated effect is roughly uniform over the pupil, we obtain a high-order modulation transfer function that is represented with a single free parameter. Results. The high quality of the of the proposed high-order modulation transfer function is verified by calculating the Strehl from random samples of point-spread functions for D/r0 ranging from 4 to 20, where D is the telescope diameter and r0 the Fried seeing parameter. The proposed approximation offers significant advantages over the earlier proposals. Conclusions. The proposed method of compensating for missing high-order aberrations in PD or MFBD image reconstruction can dramatically improve the fidelity of solar images. Variations of the seeing (r0) within a data-set can be compensated for self consistently during PD or MFBD processing, but the average value of r0 must be provided from an external source. The computational cost of implementing this method is marginal.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

G. B. Scharmer. 2026-11-17. Improved compensation for missing high-order aberrations with multi-frame blind deconvolution and phase diversity techniques. https://searcharxiv.com/abs/2611.22753

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite Searcharxiv by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related papers

Optimal robust detection statistics for pulsar timing arrays

Pulsar timing arrays (PTAs) seek to detect a nano-Hz stochastic gravitational-wave background (GWB) by searching for the characteristic Hellings and Downs angular pattern of timing residual correlations. So far, the evidence remains below the conventional $5σ$ threshold, as assessed using the literature-standard "optimal cross-correlation detection statistic". While this quadratic combination of cross-correlated data maximizes the deflection (signal-to-noise ratio), it does not maximize the detection probability at fixed false-alarm probability (FAP), and therefore is not Neyman-Pearson (NP) optimal for the assumed noise and signal models. The NP-optimal detection statistic is a different quadratic form, but is not used because it also incorporates autocorrelations, making it more susceptible to uncertainties in the modeling of pulsar timing noise. Here, we derive the best compromise: a quadratic detection statistic which is as close as possible to the NP-optimal detection statistic (minimizing the variance of its difference with the NP statistic) subject to the constraint that it only uses cross-correlations, so that it is less affected by pulsar noise modeling errors. We study the performance of this new NPMV statistic for a simulated PTA whose noise and (putative) signal match those of the NANOGrav 15-year data release: GWB amplitude $A_{\rm gw} = 2.1 \times 10^{-15}$ and spectral index $γ= 13/3$. Compared to the literature-standard "optimal" cross-correlation detection statistic, the NPMV statistic increases the detection probability by 47% when operating at a $5σ$ false-alarm probability of $α= 2.9 \times 10^{-7}$.

astro-ph.IM↗

Wideband overlapped polyphase channelizer for kinetic inductance detector readout: split-path architecture and experimental characterization

Frequency-multiplexed readout of kinetic inductance detector arrays measures the complex transmission of thousands of superconducting resonators. The channelizer that separates them introduces systematic effects: a gain that depends on where each tone falls in the channel grid, leakage between channels and added noise. This article presents a 4096-channel polyphase channelizer with 2/1 overlap for a 4.096 GS/s input, implemented on a first-generation radio-frequency system-on-chip, and a procedure to characterize it on the board with two receive chains, one digitizing the excitation as a reference. A split-path architecture computes the two overlap states in parallel filter branches at 256 MHz and reorders them frame by frame, under three control rules; it keeps only the transform stage at 512 MHz and affords a prototype of 16 taps per polyphase path (65536 coefficients) at the multiplication rate of a published 8-tap bank. Each selected channel is exported as a complex series at 1 MS/s. The measured channel response follows the coefficient-table model within 0.15 dB down to -28 dB, with both overlapping channels at full gain across their common band. Leakage into every measured channel 1.875 MHz or more from the tone is -94 dBc or lower, apart from images attributed to converter interleaving. The signal-to-noise ratio per sample lies within 1.7 dB of the limit set by the data-sheet noise density of the converter, and an emulated detector pulse is recovered with a decay time of 14.65 $μ$s (standard uncertainty 0.04 $μ$s), within 0.7% of the expected value.

astro-ph.IM↗

A transformer analysis lowers the energy threshold and improves the sensitivity of a compact imaging atmospheric Cherenkov telescope

Context. A companion study simulated an idealised stand-alone imaging atmospheric Cherenkov telescope with a 5 m diameter mirror. A video vision transformer that processes the raw camera waveforms lowered its energy threshold by a factor of three, compared with the standard analysis based on image parameters. Aims. We use realistic photodetectors, compute the differential flux sensitivity, and study how hardware parameters affect the transformer analysis. Methods. With the simulation tools of the Cherenkov Telescope Array Observatory, we compare three photodetector efficiencies (100 %, 50 % and that of the LST-1 photomultipliers) with the transformer and with a standard analysis optimised for each. We then vary the dish diameter, field of view, pulse width and sampling rate. Results. With the LST-1 photomultipliers, the energy threshold is 0.18 TeV with the transformer and 0.73 TeV with the standard analysis. The standard analysis needs a photodetector efficiency of 100 % to match that threshold. The main reason is that the transformer works with events of about 35 photoelectrons in the camera, whereas the standard analysis needs about 200 before image cleaning. A 4 m dish with the transformer is more sensitive at all energies than a 5 m dish with the standard analysis. Dishes of 4, 5 and 6 m diameter give thresholds of 0.38, 0.18 and 0.13 TeV. Sampling the pixel signals at 2 GS/s instead of 5 GS/s raises the threshold to 0.26 TeV, whereas the single-photoelectron pulse width (1-3 ns) matters little. Conclusions. The analysis matters as much as the mirror area and the photodetector efficiency. With the transformer analysis, the idealised 5 m diameter telescope comes within a factor of about four of the sensitivity of LST-1 and MAGIC above 0.25 TeV, although its mirror area is 21 times smaller than that of the 23 m LST-1. This performance should improve substantially in the coming years.

astro-ph.IM↗