Stroboscopic Laser Diagnostics for Detection of Ordering in One-Dimensional Ion beam

R. Calabrese; V. Guidi; P. Lenisa; E. Mariotti; L. Moi; U. Tambini

doi:10.1103/physreva.52.2464

Home/Archive/arXiv

arXiv · acc-phys/9505002

Stroboscopic Laser Diagnostics for Detection of Ordering in One-Dimensional Ion beam

R. Calabrese·V. Guidi·P. Lenisa·E. Mariotti·L. Moi·U. Tambini

View original source ↗Read source document ↗Export metadata ↓

Abstract

A novel diagnostic method for detecting ordering in one-dimensional ion beams is presented. The ions are excited by a pulsed laser at two different positions along the beam and fluorescence is observed by a group of four photomultipliers. Correlation in fluorescence signals is firm indication that the ion beam has an ordered structure.

Explore related subjects

acc-phys hep-ex physics.acc-ph

Keep this discovery

BibTeX RIS

R. Calabrese, V. Guidi, P. Lenisa, E. Mariotti, L. Moi, U. Tambini. 1995-05-24. Stroboscopic Laser Diagnostics for Detection of Ordering in One-Dimensional Ion beam. https://doi.org/10.1103/physreva.52.2464

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv1997

Beam Coupling Impedances of Obstacles Protruding into Beam Pipe

The beam coupling impedances of small obstacles protruding inside the vacuum chamber of an accelerator are calculated analytically at frequencies for which the wavelength is large compared to a typical size of the obstacle. Simple formulas for a few important particular cases, including both essentially three-dimensional objects like a post or a mask and axisymmetric irises, are presented. The analytical results are compared and agree with three-dimensional computer simulations. These results allow simple practical estimates of the broad-band impedance contributions from such discontinuities.

acc-phys↗

arXiv1996

Coupling Impedances of Azimuthally Symmetric Obstacles of Semi-Elliptical Shape in a Beam Pipe

The beam coupling impedances of small axisymmetric obstacles having a semi-elliptical cross section along the beam in the vacuum chamber of an accelerator are calculated at frequencies for which the wavelength is large compared to a typical size of the obstacle. Analytical results are obtained for both the irises and the cavities with such a shape which allow simple estimates of their broad-band impedances.

acc-phys↗

arXiv1996

A High Current Proton Linac with 352 MHz SC Cavities

A proposal for a 10-120 mA proton linac employing superconducting beta-graded, CERN type, four cell cavities at 352 MHz is presented. The high energy part (100 MeV-1 GeV) of the machine is split in three beta-graded sections, and transverse focusing is provided via a periodic doublet array. All the parameters, like power in the couplers and accelerating fields in the cavities, are within the state of the art, achieved in operating machines. A first stage of operation at 30 mA beam current is proposed, while the upgrade of the machine to 120 mA operation can be obtained increasing the number of klystrons and couplers per cavity. The additional coupler ports, up to four, will be integrated in the cavity design. Preliminary calculations indicate that beam transport is feasible, given the wide aperture of the 352 MHz structures. A capital cost of less than 100 M$ at 10 mA, reaching up to 280 M$ for the 120 mA extension, has been estimated for the superconducting high energy section (100 MeV-1 GeV). The high efficiency of the proposed machine, reaching 50% at 15 mA, makes it a good candidate for proposed nuclear waste incineration facilities and Energy Amplifier studies.

acc-phys↗