arXiv subjects

A. F. V. Cortez

Publications and source records attributed to A. F. V. Cortez.

12 recordsLinked to original sources

arXiv2026

Sensitivity to low-mass WIMPs with an improved liquid argon ionization response model within the DarkSide programme

Dark matter detection experiments using liquid argon rely on a precise characterization of the ionization response to nuclear recoils, especially in the keV energy range relevant for light dark matter interactions. In this work, we present a comprehensive analysis that combines new measurements from the ReD setup, part of the DarkSide experimental program, with calibration data from DarkSide-50, as well as results from the ARIS and SCENE experiments. These combined datasets enable improved constraints on atomic screening effects in the modeling of the ionization response of liquid argon to nuclear recoils. The analysis is performed within the Thomas-Imel recombination framework adopted in previous DarkSide studies, and is here further constrained by the inclusion of ReD data, which allow the screening function to be determined from calibration measurements. By including the updated ionization model into the DarkSide-50 analysis framework, we obtain stronger exclusion limits on low-mass WIMP interactions, setting new world-leading constraints in the 1-3 GeV/c^2 WIMP mass range. Finally, we recast the sensitivity projections for the upcoming DarkSide-20k detector, demonstrating a significantly enhanced discovery potential for low-mass dark matter candidates.

hep-ex↗

arXiv2026

Production of GEM-like structures for cryogenic applications, using laser-cutting techniques

A novel concept for electroluminescence (EL) structures was recently proposed. In it, a wavelength-shifting material is deposited inside the holes of GEM-like structures which, after suitable optical treatment of its electrodes, improves the light collection and detection efficiency in noble gas TPCs. This new development directly addresses problems related with the scalability of future dual-phase TPCs for rare-event searches, matching (and potentially exceeding) the performance of conventional EL techniques. We report the newest developments on the production of such structures using laser-based techniques, namely the manufacture of a first batch of the so-called FAT-GEMs. This process allows low-cost and reproducible manufacturing of a high volume of such structures. In addition to the detailed description of the production, we present a performance assessment in pure argon, at a gas density close to the one expected in LAr conditions. An energy resolution of 23.5$\pm$1~\% (FWHM) at 5.9~keV was obtained, indicating a consistent improvement over previous batch. The optical treatment of the electrode surfaces has been greatly simplified and modestly improved, while charging-up effects arising from the use of laminates eliminated.

physics.ins-det↗

arXiv2025

Production, Quality Assurance and Quality Control of the SiPM Tiles for the DarkSide-20k Time Projection Chamber

The DarkSide-20k dark matter direct detection experiment will employ a 21 m^2 silicon photomultiplier (SiPM) array, instrumenting a dual-phase 50 tonnes liquid argon Time Projection Chamber (TPC). SiPMs are arranged into modular photosensors called Tiles, each integrating 24 SiPMs onto a printed circuit board (PCB) that provides signal amplification, power distribution, and a single-ended output for simplified readout. 16 Tiles are further grouped into Photo-Detector Units (PDUs). This paper details the production of the Tiles and the quality assurance and quality control (QA-QC) protocol established to ensure their performance and uniformity. The production and QA-QC of the Tiles are carried out at Nuova Officina Assergi (NOA), an ISO-6 clean room facility at LNGS. This process includes wafer-level cryogenic characterisation, precision flip-chip bonding, wire bonding, and extensive electrical and optical validation of each Tile. The overall production yield exceeds 83.5%, matching the requirements of the DarkSide-20k production plan. These results validate the robustness of the Tile design and its suitability for operation in a cryogenic environment.

physics.ins-det↗

arXiv2025

Impact of extreme ultraviolet radiation on the scintillation of pure and xenon-doped liquid argon

The Xenon-Argon Technology (X-ArT) collaboration presents a study on the dynamics of pure and xenon-doped liquid argon (LAr) scintillation. Using two types of silicon photomultipliers sensitive to different wavelength ranges, we provide evidence in favor of a contribution from long-lived (>10 $μ$s) extreme ultraviolet (EUV) lines emitted from argon atomic states, which enhances the light yield. This component is present in both pure and xenon-doped LAr, becoming more pronounced at higher xenon concentrations, where it complements the traditional collisional energy transfer process. To explain this mechanism, we develop a comprehensive model of the Xe-doped LAr scintillation process that integrates both collisional and radiative contributions. Additionally, we investigate how xenon doping affects LAr scintillation light yield and pulse shape discrimination. Finally, we hypothesize that the EUV component may explain the emission of spurious electrons, a known challenge in light dark matter searches using noble liquids. By characterizing the scintillation dynamics in Xe-doped LAr, identifying the long-lived EUV component, and exploring the potential origin of spurious electrons, this work lays the groundwork for optimizing detector performance and advancing the design and sensitivity of future noble liquid particle detectors.

hep-ex↗

arXiv2025

New candidate polymeric wavelength shifters for noble liquid detectors

Polymeric wavelength shifters are of particular interest for large liquid argon detectors. Inspired by the success of polyethylene naphthalate (PEN), other new polymers exhibiting a similar type of excimer fluorescence were investigated. We report on the preliminary results of the first cryogenic wavelength shifting test of a solution-cast film of PVN, poly(2-vinyl naphthalene). Significant brittleness was identified as a factor potentially limiting the use of PVN. However, clear signs of wavelength shifting were observed, with the overall efficiency and time response comparable to those of PEN.

astro-ph.IM↗

arXiv2024

Production of GEM-like structures using laser-cutting techniques

To enhance the ionization yield of liquid argon time projection chambers (LArTPC) used in dark matter and neutrino experiments it was proposed the use of dopants in LAr, with ionization energies below the scintillation threshold of Ar. While dual-phase LArTPCs have excellent sensitivity to single ionization electrons, their compatibility with photosensitive dopants is hindered by gas-phase electroluminescence photons ionizing the dopants, leading to a positive feedback loop. This can be addressed by optically decoupling the gaseous and liquid phases with a barrier that transmits electrons. A possible solution relies on the use of a pair of structures based on Gaseous Electron Multipliers(GEMs) with misaligned holes. Rather than amplifying electron signals in gas pockets within their holes, their holes will be filled with LAr and a low biasing voltage, so that incident drifting electrons are drawn into the holes but not amplified. Instead, amplification will occur in the gas phase above the structures. Its core element is a GEM-like structure machined from polyethylene naphthalate(PEN). Since PEN scintillates in the visible spectrum, the risk of increased radioactivity due to the larger mass compared to traditional wire grids is negated by the potential to veto its own radioactivity. As such, these structures may also be a useful alternative to wire grids. In this work, we report the newest developments on the production of GEM-like structures using laser-based techniques, namely the manufacture of the first batch PEN and PMMA-based GEM-like structures. This process allows low-cost, reproducible fabrication of a high volume of such structures. In addition to being a low radioactive technique, we expect that it will allow the scaling up of the production of these structures at a reduced cost. First tests indicate good electrical stability, while the performance assessment is still ongoing.

physics.ins-det↗

arXiv2024

X-ray Single-Pixel Imaging with MPGD-based detectors

X-ray imaging is an invaluable tool for noninvasive analysis in many fields ranging from basic science to medicine and security. The development of low-dose large area imaging solutions still represents an important challenge for various applications. One solution to the imaging of large areas lies in the development of novel computational imaging systems that can overcome the limitations imposed by hardware, relying instead on numerical processing power. The single-pixel detector, depending on the application, may offer a competitive edge over conventional cameras (being a cheaper alternative to the multi-pixelated solutions). In addition, the single-pixel detector can be used to achieve improved detection efficiency, faster timing response, and good spatial resolution with low radiation dose. Moreover, this technique enables detectors to image through diffuse mediums, increasing the image quality at significant depths, solving the depth penetration issues of other imaging methods. In this work, we explore the application of single-pixel imaging techniques to produce two-dimensional images with high temporal resolution (only if the process is reproducible and the conditions are static), using only a single detector (bucket detector). The setup, based on the application of Hadamard patterns, showed promising results, proving the ability of the system to acquire images using thin PLA based masks (up to 5 mm thickness). Both simulation, using GEANT 4, and experimental setup, based on a time projection chamber (TPC), used in this work to demonstrate this technique will be reported here along with the first results.

physics.ins-det↗

arXiv2024

Development of wavelength-shifting PEN foils for next generation experiments

Polyethylene naphthalate (PEN) foils have been demonstrated as a wavelength shifter suitable for operation in liquid argon. At the same time, wavelength shifting efficiency of technical grades of PEN, commercially available on the market, is lower than that of tetraphenyl butadiene (TPB). This paper reports on an R&D program focused on exploring the intrinsic limitations of PEN and optimizing it for the highest achievable wavelength shifting efficiency.

astro-ph.IM↗

arXiv2024

FAT-GEMs: (Field Assisted) Transparent Gaseous-Electroluminescence Multipliers

The idea of implementing electroluminescence-based amplification through transparent multi-hole structures (FAT-GEMs) has been entertained for some time. Arguably, for such a technology to be attractive it should perform at least at a level comparable to conventional alternatives based on wires or meshes. We present now a detailed calorimetric study carried out for 5.9~keV X-rays in xenon, for pressures ranging from 2 to 10~bar, resorting to different geometries, production and post-processing techniques. At a reference voltage 5~times above the electroluminescence threshold ($E_{EL,th}\sim0.7$~kV/cm/bar), the number of photoelectrons measured for the best structure was found to be just 18\%~below that obtained for a double-mesh with the same thickness and at the same distance. The energy resolution stayed within 10\% (relative) of the double-mesh value. An innovative characteristic of the structure is that vacuum ultraviolet (VUV) transparency of the polymethyl methacrylate (PMMA) substrate was achieved, effectively, through tetraphenylbutadiene (TPB) coating of the electroluminescence channels combined with indium tin oxide (ITO) coating of the electrodes. This resulted in a $\times 2.25$-increased optical yield (compared to the bare structure), that was found to be in good agreement with simulations if assuming a TPB wavelength-shifting-efficiency at the level of WLSE=0.74-1.28, compatible with expected values. This result, combined with the stability demonstrated for the TPB coating under electric field (over 20~h of continuous operation), shows great potential to revolutionize electroluminescence-based instrumentation.

physics.ins-det↗

arXiv2024

Cryogenic setup for the characterization of wavelength-shifting materials for noble element radiation detectors

In the present work, we describe a cryogenic setup for studies of wavelength-shifting materials for optimised light collection in noble element radiation detectors, and discuss the commissioning results. This SiPM-based setup uses alpha induced scintillation in gaseous argon as the vacuum ultraviolet light source with the goal of characterising materials, such as polyethylene naphthalate (PEN) and tetraphenyl butadiene (TPB), in terms of their wavelength-shifting efficiency. Further extensions of the system are currently being studied. The foreseen upgrades are expected to allow the study of GEM-like structures potentially interesting for rare-event searches. The design of the setup will be addressed along with the first results.

physics.ins-det↗

arXiv2023

A data acquisition and reconstruction software for SAMPA-SRS integration

In this work we present the latest developments in the SAMPA-SRS integration. A software was developed to improve the acquisition configuration, acquisition, and decoding of the data. The complete framework was tested using a triple GEM-based position sensitive detector for X-rays. The detector was operated in Ar/CO$_2$ (70/30) in continuous flow, at atmospheric pressure and made use of a 1 dimension strip readout (200$μ$m wide strips at a pitch of 400$μ$m) for charge collection. With this detector a position resolution of better than 833$μ$m was obtained, with an energy resolution of 14.2% ($σ/E$) for 5.9keV.

physics.ins-det↗

arXiv2018

Study of the loss of Xenon Scintillation in Xenon-Trimethylamine Mixtures

This work investigates the capability of TMA ((CH3)3N) molecules to shift the wavelength of Xe VUV emission (160-188 nm) to a longer, more manageable, wavelength (260-350 nm). Light emitted from a Xe lamp was passed through a gas chamber filled with Xe-TMA mixtures at 800 Torr and detected with a photomultiplier tube. Using bandpass filters in the proper transmission ranges, no reemitted light was observed experimentally. Considering the detection limit of the experimental system, if reemission by TMA molecules occurs, it is below 0.3% of the scintillation absorbed in the 160-188 nm range. An absorption coefficient value for xenon VUV light by TMA of 0.43+/-0.03 cm-1.Torr-1 was also obtained. These results can be especially important for experiments considering TMA as a molecular additive to Xe in large volume optical time projection chambers.

physics.ins-det↗