Searcharxiv⌕ Search

arXiv subjects

A. N. Ramaprakash

Publications and source records attributed to A. N. Ramaprakash.

At least 37 records · Page 2Linked to original sources

The RoboPol sample of optical polarimetric standards

Optical polarimeters are typically calibrated using measurements of stars with known and stable polarization parameters. However, there is a lack of such stars available across the sky. Many of the currently available standards are not suitable for medium and large telescopes due to their high brightness. Moreover, as we find, some of the used polarimetric standards are in fact variable or have polarization parameters that differ from their cataloged values. Our goal is to establish a sample of stable standards suitable for calibrating linear optical polarimeters with an accuracy down to $10^{-3}$ in fractional polarization. For five years, we have been running a monitoring campaign of a sample of standard candidates comprised of 107 stars distributed across the northern sky. We analyzed the variability of the linear polarization of these stars, taking into account the non-Gaussian nature of fractional polarization measurements. For a subsample of nine stars, we also performed multiband polarization measurements. We created a new catalog of 65 stars (see Table 2) that are stable, have small uncertainties of measured polarimetric parameters, and can be used as calibrators of polarimeters at medium- and large-size telescopes.

astro-ph.IM↗

Bright-Moon Sky as a Wide-Field Linear Polarimetric Flat Source for Calibration

Next-generation wide-field optical polarimeters like the Wide-Area Linear Optical Polarimeters (WALOPs) have a field of view (FoV) of tens of arcminutes. For efficient and accurate calibration of these instruments, wide-field polarimetric flat sources will be essential. Currently, no established wide-field polarimetric standard or flat sources exist. This paper tests the feasibility of using the polarized sky patches of the size of around ten-by-ten arcminutes, at a distance of up to 20 degrees from the Moon, on bright-Moon nights as a wide-field linear polarimetric flat source. We observed 19 patches of the sky adjacent to the bright-Moon with the RoboPol instrument in the SDSS-r broadband filter. These were observed on five nights within two days of the full-Moon across two RoboPol observing seasons. We find that for 18 of the 19 patches, the uniformity in the measured normalized Stokes parameters $q$ and $u$ is within 0.2 %, with 12 patches exhibiting uniformity within 0.07 % or better for both $q$ and $u$ simultaneously, making them reliable and stable wide-field linear polarization flats. We demonstrate that the sky on bright-Moon nights is an excellent wide-field linear polarization flat source. Various combinations of the normalized Stokes parameters $q$ and $u$ can be obtained by choosing suitable locations of the sky patch with respect to the Moon

astro-ph.IM↗

Starlight-polarization-based tomography of the magnetized interstellar medium: PASIPHAE's line-of-sight inversion method

We present the first Bayesian method for tomographic decomposition of the plane-of-sky orientation of the magnetic field with the use of stellar polarimetry and distance. This standalone tomographic inversion method presents an important step forward in reconstructing the magnetized interstellar medium (ISM) in 3D within dusty regions. We develop a model in which the polarization signal from the magnetized and dusty ISM is described by thin layers at various distances. Our modeling makes it possible to infer the mean polarization (amplitude and orientation) induced by individual dusty clouds and to account for the turbulence-induced scatter in a generic way. We present a likelihood function that explicitly accounts for uncertainties in polarization and parallax. We develop a framework for reconstructing the magnetized ISM through the maximization of the log-likelihood using a nested sampling method. We test our Bayesian inversion method on mock data taking into account realistic uncertainties from Gaia and as expected for the optical polarization survey PASIPHAE according to the currently planned observing strategy. We demonstrate that our method is effective at recovering the cloud properties as soon as the polarization induced by a cloud to its background stars is higher than $\sim 0.1\%$ for the adopted survey exposure time and level of systematic uncertainty. Our method makes it possible to recover not only the mean polarization properties but also to characterize the intrinsic scatter, thus creating new ways to characterize ISM turbulence and the magnetic field strength. Finally, we apply our method to an existing data set of starlight polarization with known line-of-sight decomposition, demonstrating agreement with previous results and an improved quantification of uncertainties in cloud properties.

astro-ph.GA↗

The Aditya-L1 mission of ISRO

The Aditya-L1 is the first space-based solar observatory of the Indian Space Research Organization (ISRO). The spacecraft will carry seven payloads providing uninterrupted observations of the Sun from the first Lagrangian point. Aditya-L1 comprises four remote sensing instruments, {\it viz.} a coronagraph observing in visible and infrared, a full disk imager in Near Ultra-Violet (NUV), and two full-sun integrated spectrometers in soft X-ray and hard X-ray. In addition, there are three instruments for in-situ measurements, including a magnetometer, to study the magnetic field variations during energetic events. Aditya-L1 is truly a mission for multi-messenger solar astronomy from space that will provide comprehensive observations of the Sun across the electromagnetic spectrum and in-situ measurements in a broad range of energy, including magnetic field measurements at L1.

astro-ph.SR↗

WALOP-South: A Four-Camera One-Shot Imaging Polarimeter for PASIPHAE Survey. Paper II -- Polarimetric Modelling and Calibration

The Wide-Area Linear Optical Polarimeter (WALOP)-South instrument is an upcoming wide-field and high-accuracy optical polarimeter to be used as a survey instrument for carrying out the Polar-Areas Stellar Imaging in Polarization High Accuracy Experiment (PASIPHAE) program. Designed to operate as a one-shot four-channel and four-camera imaging polarimeter, it will have a field of view of $35\times 35$ arcminutes and will measure the Stokes parameters $I$, $q$, and $u$ in a single exposure in the SDSS-r broadband filter. The design goal for the instrument is to achieve an overall polarimetric measurement accuracy of 0.1 % over the entire field of view. We present here the complete polarimetric modeling of the instrument, characterizing the amount and sources of instrumental polarization. To accurately retrieve the real Stokes parameters of a source from the measured values, we have developed a calibration method for the instrument. Using this calibration method and simulated data, we demonstrate how to correct instrumental polarization and obtain 0.1 % accuracy in the degree of polarization, $p$. Additionally, we tested and validated the calibration method by implementing it on a table-top WALOP-like test-bed polarimeter in the laboratory.

astro-ph.IM↗

Gaussian phase autocorrelation as an accurate compensator for FFT-based atmospheric phase screen simulations

Accurately simulating the atmospheric turbulence behaviour is always challenging. The well-known FFT based method falls short in correctly predicting both the low and high frequency behaviours. Sub-harmonic compensation aids in low-frequency correction but does not solve the problem for all screen size to outer scale parameter ratios (G/$L_0$). FFT-based simulation gives accurate result only for relatively large screen size to outer scale parameter ratio (G/$L_0$). In this work, we have introduced a Gaussian phase autocorrelation matrix to compensate for any sort of residual errors after applying for a modified subharmonics compensation. With this, we have solved problems such as under sampling at the high-frequency range, unequal sampling/weights for subharmonics addition at low-frequency range and the patch normalization factor. Our approach reduces the maximum error in phase structure-function in the simulation with respect to theoretical prediction to within 1.8\%, G/$L_0$ = 1/1000.

astro-ph.IM↗

The Solar Ultraviolet Imaging Telescope onboard Aditya-L1

The Solar Ultraviolet Imaging Telescope (SUIT) is an instrument onboard the Aditya-L1 mission of ISRO that will measure and monitor the solar radiation emitted in the near-ultraviolet wavelength range (200-400 nm). SUIT will simultaneously map the photosphere and the chromosphere of the Sun using 11 filters sensitive to different wavelengths and covering different heights in the solar atmosphere and help us understand the processes involved in the transfer of mass and energy from one layer to the other. SUIT will also allow us to measure and monitor spatially resolved solar spectral irradiance that governs the chemistry of oxygen and ozone in the stratosphere of Earth's atmosphere. This is central to our understanding of the Sun climate relationship.

astro-ph.SR↗

WALOP-South: A Four Camera One Shot Imaging Polarimeter for PASIPHAE Survey. Paper I -- Optical Design

The WALOP-South instrument will be mounted on the 1 m SAAO telescope in South Africa as part of the PASIPHAE program to carry out a linear imaging polarization survey of the Galactic polar regions in the optical band. Designed to achieve polarimetric sensitivity of $0.05~\%$ across a $35\times35$ arcminute field of view, it will be capable of measuring the Stokes parameters I, q and u in a single exposure in the SDSS-r broadband and narrowband filters between $0.5~μm - 0.7~μm$. For each measurement, four images of the full field corresponding to linear polarization angles of 0 deg, 45 deg, 90 deg and 135 deg in the instrument coordinate system will be created on four detectors from which the Stokes parameters can be found using differential photometry. In designing the optical system, major challenges included correcting for the dispersion introduced by large split angle Wollaston Prisms used as analysers as well as other aberrations from the entire field to obtain imaging quality PSF at the detector. We present the optical design of the WALOP-South instrument which overcomes these challenges and delivers near seeing limited PSFs for the entire field of view.

astro-ph.IM↗

WALOP-South: A wide-field one-shot linear optical polarimeter for PASIPHAE survey

WALOP (Wide-Area Linear Optical Polarimeter)-South, to be mounted on the 1m SAAO telescope in South Africa, is first of the two WALOP instruments currently under development for carrying out the PASIPHAE survey. Scheduled for commissioning in the year 2021, the WALOP instruments will be used to measure the linear polarization of around $10^{6}$ stars in the SDSS-r broadband with $0.1~\%$ polarimetric accuracy, covering 4000 square degrees in the Galactic polar regions. The combined capabilities of one-shot linear polarimetry, high polarimetric accuracy ($< 0.1~\%$) and polarimetric sensitivity ($< 0.05~\%$), and a large field of view (FOV) of $35\times35~arcminutes$ make WALOP-South a unique astronomical instrument. In a single exposure, it is designed to measure the Stokes parameters $I$, $q$ and $u$ in the SDSS-r broadband and narrowband filters between $500-700~nm$. During each measurement, four images of the full field corresponding to the polarization angles of $0^{\circ}$, $45^{\circ}$, $90^{\circ}$ and $135^{\circ}$ will be imaged on four detectors and carrying out differential photometry on these images will yield the Stokes parameters. Major challenges in designing WALOP-South instrument include- (a) in the optical design, correcting for the spectral dispersion introduced by large split angle Wollaston Prisms used as polarization analyzers as well as aberrations from the wide field, and (b) making an optomechanical design adherent to the tolerances required to obtain good imaging and polarimetric performance under all temperature conditions as well as telescope pointing positions. We present the optical and optomechanical design for WALOP-South which overcomes these challenges.

astro-ph.IM↗

RoboPol: AGN polarimetric monitoring data

We present uniformly reprocessed and re-calibrated data from the RoboPol programme of optopolarimetric monitoring of active galactic nuclei (AGN), covering observations between 2013, when the instrument was commissioned, and 2017. In total, the dataset presented in this paper includes 5068 observations of 222 AGN with Dec > -25 deg. We describe the current version of the RoboPol pipeline that was used to process and calibrate the entire dataset, and we make the data publicly available for use by the astronomical community. Average quantities summarising optopolarimetric behaviour (average degree of polarization, polarization variability index) are also provided for each source we have observed and for the time interval we have followed it.

astro-ph.HE↗

Eliminating artefacts in Polarimetric Images using Deep Learning

Polarization measurements done using Imaging Polarimeters such as the Robotic Polarimeter are very sensitive to the presence of artefacts in images. Artefacts can range from internal reflections in a telescope to satellite trails that could contaminate an area of interest in the image. With the advent of wide-field polarimetry surveys, it is imperative to develop methods that automatically flag artefacts in images. In this paper, we implement a Convolutional Neural Network to identify the most dominant artefacts in the images. We find that our model can successfully classify sources with 98\% true positive and 97\% true negative rates. Such models, combined with transfer learning, will give us a running start in artefact elimination for near-future surveys like WALOP.

cs.LG↗

RoboPol: A four-channel optical imaging polarimeter

We present the design and performance of RoboPol, a four-channel optical polarimeter operating at the Skinakas Observatory in Crete, Greece. RoboPol is capable of measuring both relative linear Stokes parameters $q$ and $u$ (and the total intensity $I$) in one sky exposure. Though primarily used to measure the polarization of point sources in the R-band, the instrument features additional filters (B, V and I), enabling multi-wavelength imaging polarimetry over a large field of view (13.6' $\times$ 13.6'). We demonstrate the accuracy and stability of the instrument throughout its five years of operation. Best performance is achieved within the central region of the field of view and in the R band. For such measurements the systematic uncertainty is below 0.1% in fractional linear polarization, $p$ (0.05% maximum likelihood). Throughout all observing seasons the instrumental polarization varies within 0.1% in $p$ and within 1$^\circ$ in polarization angle.

astro-ph.IM↗

Optical spectroscopic and polarization properties of 2011 outburst of the recurrent nova T Pyxidis

We study the spectroscopic and ionized structural evolution of T Pyx during its 2011 outburst, and also study the variation in degree of polarization during its early phase. Optical spectroscopic data of this system obtained from day 1.28--2415.62 since discovery, and optical, broadband imaging polarimetric observations obtained from day 1.36--29.33 during the early phases of the outburst are used in the study. The physical conditions and the geometry of the ionized structure of the nova ejecta has been modelled for a few epochs using the photo-ionization code, CLOUDY in 1D and pyCloudy in 3D. The spectral evolution of the nova ejecta during its 2011 outburst is similar to that of the previous outbursts. The variation in the line profiles is seen very clearly in the early stages due to good coverage during this period. The line profiles vary from P-Cygni (narrower, deeper and sharper) to emission profiles which are broader and structured, which later become narrower and sharper in the late post-outburst phase. The average ejected mass is estimated to be $7.03\, \times\, 10^{-6}\, M_{\odot}$. The ionized structure of the ejecta is found to be a bipolar conical structure with equatorial rings, with a low inclination angle of $14.75^\circ\, \pm\, 0.65^\circ$.

astro-ph.SR↗

DOTIFS: a new multi-IFU optical spectrograph for the 3.6-m Devasthal optical telescope

Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS) is a new multi-object Integral Field Spectrograph (IFS) being designed and fabricated by the Inter-University Center for Astronomy and Astrophysics (IUCAA), Pune, India, for the Cassegrain side port of the 3.6m Devasthal Optical Telescope, (DOT) being constructed by the Aryabhatta Research Institute of Observational Sciences (ARIES), Nainital. It is mainly designed to study the physics and kinematics of the ionized gas, star formation and H II regions in the nearby galaxies. It is a novel instrument in terms of multi-IFU, built in deployment system, and high throughput. It consists of one magnifier, 16 integral field units (IFUs), and 8 spectrographs. Each IFU is comprised of a microlens array and optical fibers and has 7.4'' x 8.7'' field of view with 144 spaxel elements, each sampling 0.8'' hexagonal aperture. The IFUs can be distributed on the telescope side port over an 8' diameter focal plane by the deployment system. Optical fibers deliver light from the IFUs to the spectrographs. Eight identical, all refractive, dedicated spectrographs will produce 2,304 R~1800 spectra over 370-740nm wavelength range with a single exposure. Volume Phase Holographic gratings are chosen to make smaller optics and get high throughput. The total throughput of the instrument including the telescope is predicted as 27.5% on average. Observing techniques, data simulator and reduction software are also under development. Currently, conceptual and baseline design review has been done. Some of the components have already been procured. The instrument is expected to see its first light in 2016.

astro-ph.IM↗

DOTIFS: spectrograph optical and opto-mechanical design

Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS) is a new multi-Integral Field Unit (IFU) instrument, planned to be mounted on the 3.6m Devasthal optical telescope in Nainital, India. It has eight identical, fiber-fed spectrographs to disperse light coming from 16 IFUs. The spectrographs produce 2,304 spectra over a 370-740nm wavelength range simultaneously with a spectral resolution of R=1200-2400. It is composed of all-refractive, all spherical optics designed to achieve on average 26.0% throughput from the telescope to the CCD with the help of high transmission spectrograph optics, volume phase holographic grating, and graded coated e2v 2K by 4K CCD. We present the optical and opto-mechanical design of the spectrograph as well as current development status. Optics and optomechanical components for the spectrographs are being fabricated.

astro-ph.IM↗

DOTIFS: fore-optics and calibration unit design

We present fore-optics and calibration unit design of Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS). DOTIFS fore-optics is designed to modify the focal ratio of the light and to match its plate scale to the physical size of Integral Field Units (IFUs). The fore-optics also delivers a telecentric beam to the IFUs on the telescope focal plane. There is a calibration unit part of which is combined with the fore-optics to have a light and compact system. We use Xenon-arc lamp as a continuum source and Krypton/Mercury-Neon lamps as wavelength calibration sources. Fore-optics and calibration unit shares two optical lenses to maintain compactness of the overall subsystem. Here we present optical and opto-mechanical design of the calibration unit and fore-optics as well as calibration scheme of DOTIFS.

astro-ph.IM↗

Noise Characterization of IUCAA Digital Sampling Array Controller (IDSAC)

IUCAA Digital Sampling Array Controller (IDSAC) is a flexible and generic yet powerful CCD controller which can handle a wide range of scientific detectors. Based on an easily scalable modular backplane architecture consisting of Single Board Controllers (SBC), IDSAC can control large detector arrays and mosaics. Each of the SBCs offers the full functionality required to control a CCD independently. The SBCs can be cold swapped without the need to reconfigure them. Each SBC can handle data from up to four video channels with or without dummy outputs at speeds up to 500 kilo Pixels Per Second (kPPS) Per Channel with a resolution of 16 bits. Communication with Linux based host computer is through a USB3.0 interface, with the option of using copper or optical fibers. A Field Programmable Gate Array (FPGA) is used as the master controller in each SBC which allows great flexibility in optimizing performance by adjusting gain, timing signals, bias levels, etc. using user-editable configuration files without altering the circuit topology. Elimination of thermal kTC noise is achieved via Digital Correlated Double Sampling (DCDS). We present the results of noise performance characterization of IDSAC through simulation, theoretical modeling, and actual measurements. The contribution of different types of noise sources is modeled using a tool to predict noise of a generic DCDS signal chain analytically. The analytical model predicts the net input referenced noise of the signal chain to be 5 electrons for 200k pixels per second per channel readout rate with 3 samples per pixel. Using a cryogenic test set up in the lab, the noise is measured to be 5.4 e (24.3 \muV), for the same readout configuration.

astro-ph.IM↗

Multiple rooks of chess - a generic integral field unit deployment technique

A new field re-configuration technique, Multiple Rooks of Chess (MRC), for multiple deployable Integral Field Spectrographs has been developed. The method involves mechanical geometry as well as an optimized deployment algorithm. The geometry is found to be simple for mechanical implementation. The algorithm initially assigns the IFUs to the target objects and then devises the movement sequence based on the current and the desired IFU positions. The reconfiguration time using the suitable actuators which runs at 20 cm/s is found to be a maximum of 25 seconds for the circular DOTIFS focal plane (180 mm diameter). The Geometry Algorithm Combination (GAC) has been tested on several million mock target configurations with object-to-IFU (τ ) ratio varying from 0.25 to 16. The MRC method is found to-be efficient in target acquisition in terms of field revisit and deployment time without any collision or entanglement of the fiber bundles. The efficiency of the technique does not get affected by the increase in number density of target objects. The technique is compared with other available methods based on sky coverage, flexibility and overhead time. The proposed geometry and algorithm combination is found to have an advantage in all of the aspects.

astro-ph.IM↗