Searcharxiv⌕ Search

arXiv subjects

A. Russo

Publications and source records attributed to A. Russo.

At least 19 recordsLinked to original sources
arXiv2026

Design and beam-test characterization of the CRILIN semi-homogeneous crystal calorimeter

CRILIN is a high-granularity semi-homogeneous electromagnetic calorimeter based on longitudinally segmented PbF$_2$ crystal matrices read out by UV-extended silicon photomultipliers. The concept combines fast Cherenkov response, fine transverse granularity, longitudinal shower information, and radiation tolerance for future lepton-collider experiments. This paper reports the construction of a large-area prototype and its performance measured in beam tests at the CERN SPS. The detector comprises five $7\times7$ PbF$_2$ crystal matrices, has a depth of about $22X_0$, and is read out by four $3\times3~\mathrm{mm}^2$ SiPMs per crystal integrated in a single electronic channel. Electron data between 10 and 120~GeV and dedicated 150~GeV muon data were used to characterize the detector response. A time resolution below 50~ps is achieved for electron energies above 10~GeV, reaching values below 20~ps above 60~GeV. The energy resolution is described by a stochastic term of $(6.58\pm0.04)\%/\sqrt{E/\mathrm{GeV}}$ and a constant term of $(0.23\pm0.02)\%$, with an additional noise contribution fixed from pedestal data. The longitudinal segmentation enables event-by-event corrections based on the reconstructed shower development, resulting in a significant improvement of the energy resolution. A light yield of approximately 0.54~photoelectrons/MeV is measured consistently using both electron showers and minimum-ionizing particles. A Geant4-based simulation incorporating the relevant experimental effects reproduces the measured energy resolution. These results validate the CRILIN architecture as a compact, fast, and longitudinally segmented electromagnetic calorimeter for future collider experiments.

physics.ins-det↗
arXiv2026

Dark Matter Sensitivity of the CYGNO Detector with HFO-1234ze Enhanced Gas Mixtures

The CYGNO collaboration introduces an innovative approach to direct dark matter detection, proposing a high-resolution optical Time Projection Chamber. It operates at atmospheric pressure with a He:CF$_{4}$ (60:40) gas mixture and uses a triple Gas Electron Multiplier stage for signal amplification. A key feature is its optical readout system, which captures the scintillation light produced during the electron avalanche. This setup allows 3D event reconstruction by combining the time profile of the light detected by photomultiplier tubes with high-granularity, pixelated X-Y tracking recorded by a scientific camera. The CYGNO experiment's projected sensitivity to both spin-independent and spin-dependent interactions is competitive in the framework of directional dark matter detectors. However, incorporating a hydrogen-based gas would introduce an even lighter target, further improving the detection potential at low dark matter masses. In this work, we present the performance characterization of one of the CYGNO experiment prototypes, MANGO, operated with the standard gas mixture enriched with varying concentrations of HFO-1234ze, a gas with a promising low global warming potential. The study includes measurements of the detector charge gain and scintillation yield for each configuration. In addition, to evaluate the impact of HFO-1234ze on scintillation light quenching, the secondary scintillation spectrum was collected for each gas mixture tested.

physics.ins-det↗
arXiv2026

A Diffusion Approximation for Temporal-Difference Learning with Linear Features under Markovian Noise

Temporal difference (TD) learning with linear function approximation is a core method for policy evaluation. Its classical continuous-time description is an ordinary differential equation (ODE), which captures the asymptotic mean dynamics but neglects stochastic fluctuations determining the error floor. We introduce a stochastic differential equation (SDE) approximation for linear TD(0) under Markovian noise. The resulting model distinguishes the contraction dynamics governed by the projected Bellman operator from the influence of Markovian sampling. As a consequence, the model explains the constant-stepsize error floor through the interaction between Markovian long-run covariance and the contraction geometry of the projected Bellman operator.

stat.ML↗
arXiv2026

He-CF4-CH4 ternary mixtures as target gas for the CYGNO directional dark matter experiment

The CYGNO collaboration is advancing a high-resolution optical Time Projection Chamber (TPC) for directional dark matter searches and solar neutrino spectroscopy at LNGS. The detector uses a He-40%CF4 gas mixture at atmospheric pressure and a triple-GEM cascade for ionization signal amplification. Scintillation light from GEM electron avalanches is read out using sCMOS cameras, enabling high sensitivity to interactions in the few keV range, alongside precise ionization event tracking and particle identification. This study investigates the effects of adding 3-10% methane to the He-40%CF4 mixture. Methane improves the electrical stability of the TPC, allowing for higher GEM voltages before discharge onset, which compensates for its scintillation quenching and leads to enhanced overall scintillation yield. Compared to prior studies performed with isobutane, methane demonstrates a lower quenching effect on visible and UV photons while maintaining good energy resolution. Importantly, the inclusion of methane lowers the dark matter detection threshold by providing a lighter target and extending track lengths of light nuclear recoils, thus enhancing directional discrimination. These results establish methane as a promising additive for optimizing CYGNO's performance in detecting low-mass dark matter candidates.

physics.ins-det↗
arXiv2026

Conforming/Non-conforming Virtual Elements and application to elasticity problems in curved three-dimensional domains

The Virtual Element Method (VEM) is a well-established framework for solving partial differential equations on polygonal and polyhedral meshes. In this paper, we introduce a novel hybrid VEM that integrates both conforming and nonconforming virtual spaces. We apply this formulation to a three-dimensional linear elasticity problem, providing rigorous theoretical analysis to demonstrate optimal convergence rates. Furthermore, we explore the extension of this approach to domains with curved boundaries.

math.NA↗
arXiv2026

The CYGNO experiment: a gaseous TPC with optical readout for rare events searches

The CYGNO collaboration is developing a novel strategy for directional Dark Matter searches based on a gaseous Time Projection Chamber (TPC). The detector is optimized for the exploration of light (0.5-50 GeV) WIMPs-like particles and employs a He/CF4 gas mixture at atmospheric pressure, sensitive to both spin-dependent and spin-independent interactions. A key feature of the project is its optical readout, which relies on photon detection rather than charge collection. In CYGNO detectors, electrons released by ionizing tracks drift toward an amplification stage of three Gas Electron Multipliers (GEMs). The electron avalanches generate scintillation light that is captured by scientific CMOS (sCMOS) cameras for high-resolution two-dimensional imaging and by Photomultiplier Tubes (PMTs) that provide a precise time profile along the drift direction. This allows a 3D event reconstruction, detailed energy deposition mapping, and effective topology and head-to-tail discrimination. Building on the achievements of the 50 L prototype (LIME), which successfully operated underground at LNGS, the next step is the deployment of a 0.4 m3 demonstrator, CYGNO-04, to be completed in 2026. The demonstrator will validate scalability and confirm the advantages of the proposed technique. Recent results from LIME highlight strong progress in 3D tracking and particle identification. The current status of CYGNO-04 and its role in advancing the program will be presented as well.

physics.ins-det↗
arXiv2026

Upgrade of the Trigger and Data Acquisition System for Continuous Imaging and Multi-Camera Operation in CYGNO

The CYGNO experiment employs an optical readout to image particle interactions in a gaseous Time Projection Chamber (TPC), combining cameras and photomultiplier tubes (PMTs) to achieve high spatial resolution and timing information. This approach enables detailed track reconstruction but poses significant challenges for data acquisition, particularly in view of the next experimental phase, CYGNO-04, which will operate multiple cameras simultaneously. In this paper, we present an upgrade of the CYGNO Trigger and Data Acquisition (T-DAQ) system, developed starting from the LIME configuration and validated on the MANGO prototype. The upgrade introduces a continuous imaging acquisition mode, substantially reducing the camera dead time, together with an extended trigger time-tagging scheme that provides a robust global time reference for PMT signals. A synchronous multi-camera DAQ architecture is also implemented and tested, enabling coordinated operation of multiple optical sensors without a master camera. The performance of the upgraded system is validated through dedicated tests, demonstrating stable continuous acquisition, reliable time-tagging, and consistent synchronization across multiple cameras. These results establish a solid and scalable foundation for the CYGNO-04 DAQ and represent a key step toward efficient data acquisition in future large-scale optical TPC detectors.

physics.ins-det↗
arXiv2026

First Optical Observation of Negative Ion Drift at Surface Pressure

We report the first observation of Negative Ion Drift (NID) at surface pressure of $900 \pm 7$ mbar at Laboratori Nazionali del Gran Sasso in a He:CF$_4$:SF$_6$ mixture using an optically read out Time Projection Chamber (TPC) within the CYGNO/INITIUM project. We present the first PMT waveform analysis in the NID regime, interpreting the temporal light pattern through a model that combines track geometry and charge transport. The inferred drift velocities correspond to mobilities of O(cm$^2$ V$^{-1}$ s$^{-1}$), consistent with negative ion transport. The observed linear scaling of the time extension mean with drift distance reveals the presence of a faster minority charge carrier population in addition to the dominant SF$_6^-$ species, drifting at a $\sim$25\% higher velocity under external inputs. These results demonstrate multi-species negative ion drift operation at surface pressure in a He:CF$_4$:SF$_6$ mixture and open a concrete path toward large scale, low diffusion optical TPCs for rare event searches.

physics.ins-det↗
arXiv2026

Trigger Optimization and Event Classification for Dark Matter Searches in the CYGNO Experiment Using Machine Learning

The CYGNO experiment employs an optical-readout Time Projection Chamber (TPC) to search for rare low-energy interactions using finely resolved scintillation images. While the optical readout provides rich topological information, it produces large, sparse megapixel images that challenge real-time triggering, data reduction, and background discrimination. We summarize two complementary machine-learning approaches developed within CYGNO. First, we present a fast and fully unsupervised strategy for online data reduction based on reconstruction-based anomaly detection. A convolutional autoencoder trained exclusively on pedestal images (i.e. frames acquired with GEM amplification disabled) learns the detector noise morphology and highlights particle-induced structures through localized reconstruction residuals, from which compact Regions of Interest (ROIs) are extracted. On real prototype data, the selected configuration retains (93.0 +/- 0.2)% of reconstructed signal intensity while discarding (97.8 +/- 0.1)% of the image area, with ~25 ms per-frame inference time on a consumer GPU. Second, we report a weakly supervised application of the Classification Without Labels (CWoLa) framework to data acquired with an Americium--Beryllium neutron source. Using only mixed AmBe and standard datasets (no event-level labels), a convolutional classifier learns to identify nuclear-recoil-like topologies. The achieved performance approaches the theoretical limit imposed by the mixture composition and isolates a high-score population with compact, approximately circular morphologies consistent with nuclear recoils.

physics.ins-det↗
arXiv2026

Simulation of the CYGNO Gaseous TPC Optical Readout

Gaseous Time Projection Chambers with Optical Readout are sensitive detectors suitable for 3D measurement of low-energy O(1 keV) particles and are proposed for detecting rare events such as Dark Matter particle interactions. The CYGNO collaboration is developing such a detector with a high spatial and energy resolution, leveraging an innovative optical readout system. A reliable simulation of the detector response is needed to properly assess the physics reach of this technique and to better understand the performance of the detector in the development phase. Such a simulation cannot entirely rely on existing software packages; indeed, none of the available tools is capable of properly and reliably treating the different phenomena occurring in the detector, from the primary interaction in the gas volume throughout the whole detector response model, including charge transport, light production and propagation, and the response of the optical sensors. In this paper, we present a modeling of the detector response tuned on the CYGNO Optical TPC case; a description of the method is reported together with comparisons with experimental data from the LIME prototype to demonstrate the simulation performances.

physics.ins-det↗
arXiv2025

Fast reconstruction-based ROI triggering via anomaly detection in the CYGNO optical TPC

Optical-readout Time Projection Chambers (TPCs) produce megapixel-scale images whose fine-grained topological information is essential for rare-event searches, but whose size challenges real-time data selection. We present an unsupervised, reconstruction-based anomaly-detection strategy for fast Region-of-Interest (ROI) extraction that operates directly on minimally processed camera frames. A convolutional autoencoder trained exclusively on pedestal images learns the detector noise morphology without labels, simulation, or fine-grained calibration. Applied to standard data-taking frames, localized reconstruction residuals identify particle-induced structures, from which compact ROIs are extracted via thresholding and spatial clustering. Using real data from the CYGNO optical TPC prototype, we compare two pedestal-trained autoencoder configurations that differ only in their training objective, enabling a controlled study of its impact. The best configuration retains (93.0 +/- 0.2)% of reconstructed signal intensity while discarding (97.8 +/- 0.1)% of the image area, with an inference time of approximately 25 ms per frame on a consumer GPU. The results demonstrate that careful design of the training objective is critical for effective reconstruction-based anomaly detection and that pedestal-trained autoencoders provide a transparent and detector-agnostic baseline for online data reduction in optical TPCs.

physics.ins-det↗
arXiv2025

Characterization of cutting-edge CMOS Active Pixel sensors within the CYGNO Experiment

Time Projection Chambers equipped with Gas Electron Multipliers and optical readout by scientific CMOS cameras are a promising technology for low-energy particle detection, as demonstrated by the CYGNO experiment. To help identify the optimal CYGNO detector configuration, we performed a detailed characterization of two state-of-the-art scientific CMOS sensors, focusing on dark-signal behavior across different exposure times and on detection sensitivity, assessed using the well-defined X-ray emissions from a 55Fe source, which reproduce the low-light conditions expected in CYGNO. CYGNO currently employs a very low-noise Hamamatsu sensor, the ORCA-Fusion, for testing and validation of its detection system. Hamamatsu has recently introduced two new sensors that may be of interest for future upgrades. The first is an improved version of the current model, the ORCA-Fusion-BT, featuring a back-illuminated design that reaches a quantum efficiency of up to 95% at 550 nm. The second is a next-generation sensor, the ORCA-Quest. Although its peak quantum efficiency is not as high as that of the Fusion-BT, it offers high sensitivity over a broader spectral range, extending into the ultraviolet region, and provides ultra-low readout noise of 0.27 electrons, about 2.6 times lower than that of the Fusion family. These two sensors therefore represent a significant opportunity to enhance the performance of scientific experiments, including those conducted by the CYGNO collaboration. This document presents a comprehensive characterization of these sensors to evaluate their relevance for experiments operating in photon-limited environments and their suitability for integration into the CYGNO detector system.

physics.ins-det↗
arXiv2025

Characterization of field cage and cathode for low radioactivity operation with the CYGNO experiment

Dark matter, which is considered to account for approximately the 27% of the Universe's energy-mass content, remains an open issue in modern particle physics along with its composition. The CYGNO Experiment aims to exploit an innovative approach applied to the direct detection search of low energy nuclear recoils possibly induced by cold particle-like dark matter candidates. CYGNO employs a directional detector based on a Time Projection Chamber (TPC) filled with a He:CF$_{4}$ gas mixture and equipped with an optical readout. Currently, the CYGNO Collaboration is constructing the detector demonstrator, CYGNO-04, in Hall F at Laboratori Nazionali del Gran Sasso (LNGS). This 0.4 m$^3$ detector has the goal of proving the scalability of the technology and assessing the physics and radiopurity capabilities. Given the low radioactivity requirements, especially in internal components such as field cage and cathode, the reduction of material while keeping the correct electrical behavior is paramount. In this paper, we present the validation of several internal components, mainly focusing on the field cage material and support structure. The tests included geometrical asymmetries in the electric field response, collection efficiency as well as measurement of known physical quantities. A preferred configuration is found with a structure based on Nylon material which supports a PET or Kapton sheet with copper strips deposited on.

physics.ins-det↗
arXiv2025

Design and Commissioning of Readout Electronics for a $K_L^0$ and $\mu$ Detector at the Belle II Experiment

The K-long and muon detector (KLM) constitutes the outer-most volume of the Belle II spectrometer at the interaction region of the SuperKEKB collider in Tsukuba, Japan. The KLM detector was partially upgraded since the Belle experiment by replacing many of its resistive-plate chambers with scintillators containing wavelength-shifting fibers and instrumenting it with silicon photomultipliers. We describe the readout electronics, firmware, and software created to control and acquire data from the scintillators and resistive-plate chambers.

hep-ex↗
arXiv2024

Development of nanocomposite scintillators for use in high-energy physics

Semiconductor nanocrystals (quantum dots) are light emitters with high quantum yield that are relatively easy to manufacture. There is therefore much interest in their possible application for the development of high-performance scintillators for use in high-energy physics. However, few previous studies have focused on the response of these materials to high-energy particles. To evaluate the potential for the use of nanocomposite scintillators in calorimetry, we are performing side-by-side tests of fine-sampling shashlyk calorimeter prototypes with both conventional and nanocomposite scintillators using electron and minimum-ionizing particle beams, allowing direct comparison of the performance obtained.

physics.ins-det↗
arXiv2024

Decay study of $^{11}$Be with an Optical TPC detector

The $\beta$ decay of one-neutron halo nucleus $^{11}$Be was investigated using the Warsaw Optical Time Projection Chamber (OTPC) detector to measure $\beta$-delayed charged particles. The results of two experiments are reported. In the first one, carried out in LNS Catania, the absolute branching ratio for $\beta$-delayed $\alpha$ emission was measured by counting incoming $^{11}$Be ions stopped in the detector and the observed decays with the emission of $\alpha$ particle. The result of 3.27(46)\% is in good agreement with the literature value. In the second experiment, performed at the HIE-ISOLDE facility at CERN, bunches containing several hundreds of $^{11}$Be ions were implanted into the OTPC detector followed by the detection of decays with the emission of charged particles. The energy spectrum of $\beta$-delayed $\alpha$ particles was determined in the full energy range. It was analysed in the R-matrix framework and was found to be consistent with the literature. The best description of the spectrum was obtained assuming that the two $3/2^+$ and one $1/2^+$ states in $^{11}$B are involved in the transition. The search for $\beta$-delayed emission of protons was undertaken. Only the upper limit for the branching ratio for this process of $(2.2 \pm 0.6_{\rm stat} \pm 0.6_{\rm sys}) \times 10^{-6}$ could be determined. This value is in conflict with the result published in [Ayyad et al. Phys. Rev. Lett. 123, 082501 (2019)] but does agree with the limit reported in [Riisager et al., Eur. Phys. J. A (2020) 56:100]

nucl-ex↗
arXiv2024

Enhancing the light yield of He:CF$_4$ based gaseous detector

The CYGNO experiment aims to build a large ($\mathcal{O}(10)$ m$^3$) directional detector for rare event searches, such as nuclear recoils (NRs) induced by dark matter (DM), such as weakly interactive massive particles (WIMPs). The detector concept comprises a time projection chamber (TPC), filled with a He:CF$_4$ 60/40 scintillating gas mixture at room temperature and atmospheric pressure, equipped with an amplification stage made of a stack of three gas electron multipliers (GEMs) which are coupled to an optical readout. The latter consists in scientific CMOS (sCMOS) cameras and photomultipliers tubes (PMTs). The maximisation of the light yield of the amplification stage plays a major role in the determination of the energy threshold of the experiment. In this paper, we simulate the effect of the addition of a strong electric field below the last GEM plane on the GEM field structure and we experimentally test it by means of a 10$\times$10 cm$^2$ readout area prototype. The experimental measurements analyse stacks of different GEMs and helium concentrations in the gas mixture combined with this extra electric field, studying their performances in terms of light yield, energy resolution and intrinsic diffusion. It is found that the use of this additional electric field permits large light yield increases without degrading intrinsic characteristics of the amplification stage with respect to the regular use of GEMs.

physics.ins-det↗