arXiv subjects

A. Sen

Publications and source records attributed to A. Sen.

At least 55 records · Page 3Linked to original sources

arXiv2019

Electric field filamentation and higher harmonic generation in a very high frequency capacitive discharges

The effects of the discharge voltage on the formation and nature of electric field transients in a symmetric, collisionless, very high frequency, capacitively coupled plasma are studied using a self-consistent particle-in-cell (PIC) simulation code. At a driving frequency of 60 MHz and 5 mTorr of argon gas pressure, the discharge voltage is varied from 10V to 150 V for a fixed discharge gap. It is observed that an increase in the discharge voltage causes filamentation in the electric field transients and to create multiple higher harmonics in the bulk plasma. Correspondingly, higher harmonics, up to 7th harmonic, in the discharge current are also observed. The power in the higher harmonics increases with a rise in the discharge voltage. The plasma density continues to increase with the discharge voltage but in a non-linear manner, whereas, the bulk electron temperature decreases. Meanwhile, the electron energy distribution function (EEDF) evolves from a Maxwellian at lower discharge voltages to a bi-Maxwellian at higher discharge voltages.

physics.plasm-ph↗

arXiv2018

Design and Beam Test Results for the sPHENIX Electromagnetic and Hadronic Calorimeter Prototypes

The super Pioneering High Energy Nuclear Interaction eXperiment (sPHENIX) at the Relativistic Heavy Ion Collider (RHIC) will perform high precision measurements of jets and heavy flavor observables for a wide selection of nuclear collision systems, elucidating the microscopic nature of strongly interacting matter ranging from nucleons to the strongly coupled quark-gluon plasma. A prototype of the sPHENIX calorimeter system was tested at the Fermilab Test Beam Facility as experiment T-1044 in the spring of 2016. The electromagnetic calorimeter (EMCal) prototype is composed of scintillating fibers embedded in a mixture of tungsten powder and epoxy. The hadronic calorimeter (HCal) prototype is composed of tilted steel plates alternating with plastic scintillator. Results of the test beam reveal the energy resolution for electrons in the EMCal is $2.8\%\oplus~15.5\%/\sqrt{E}$ and the energy resolution for hadrons in the combined EMCal plus HCal system is $13.5\%\oplus 64.9\%/\sqrt{E}$. These results demonstrate that the performance of the proposed calorimeter system satisfies the sPHENIX specifications.

physics.ins-det↗

arXiv2018

Experimental Observation of a Dusty Plasma Crystal in the Cathode Sheath of a DC Glow Discharge Plasma

Dusty plasma crystals have traditionally been observed and studied in radio frequency (RF) discharge plasmas and their formation in a DC glow discharge plasma remains experimentally challenging. We report the first ever observation of a stable dusty plasma Coulomb crystal in the cathode sheath region of a DC glow discharge plasma. The observations are made in the DPEx device where crystals of mono-disperse Melamine Formaldehyde grains are produced in the background of an Argon plasma. The crystalline nature of the structure is confirmed through a host of measurements that includes the radial pair correlation function, Voronoi diagram, Delaunay Triangulation, the structural order parameter, the dust temperature and the Coulomb coupling parameter. The special features of the DPEx device that permit such a crystal formation are delineated and some principal physical features of the crystal discussed.

physics.plasm-ph↗

arXiv2018

Experimental investigation of dynamical structures formation due to flowing complex plasma past an obstacle

We report the experimental observation of dynamical behavior of flowing complex plasma past a spherical obstacle. The experiment has been carried out in a $Π$-shaped DC glow discharge experimental device using kaolin particles as the dust component in a background of Argon plasma. A stationary dust cloud is formed by maintaining the pumping speed and gas flow rate. A spherical obstacle vertically mounted on the cathode tray acts as an obstacle to the flow of dust particles. The controlled dust flow is generated by reducing the mass flow of the neutrals through a mass flow controller. The flowing dust particles are repelled by the electrostatic field of the negatively charged sphere and a microparticle free region (dust void) is formed surrounding the obstacle. The far particles are attracted towards the floating obstacle and reflected back when they have arrived at a minimum distance, causing a ring shaped structure around the obstacle. We characterize the shape of this structure over a range of dust flow speeds and obstacle biases. For a supersonic flow of dust fluid around a negatively biased obstacle, a bow shock is formed on the upstream side of the sphere, while the generation of wave structures is observed on the downstream side for a particular range of flow velocities. Reynolds numbers in this case is estimated as $R_e \gtrsim 50$. This wave structure reminds of the beginning of the formation of a Von-Kármán vortex street. A physical picture for the observed structure based on ion-drag, neutral streaming and electric forces is discussed.

physics.plasm-ph↗

arXiv2018

A dust particle based technique to measure potential profiles in a plasma

A novel technique to measure potential profiles in a plasma based on the visualization of charged tracer dust particles is reported. The method is used to experimentally determine the potential around a grounded wire that is mounted on the cathode of a DC glow discharge Argon plasma produced in a $Π$--shaped Dusty Plasma Experimental (DPEx) device. The tracer particles, consisting of a few micron sized mono-dispersive Melamine Formaldehyde (MF) grains, are made to flow over the grounded wire by suitable variations in the background gas flow. By a visual tracking of the individual particle trajectories, that yields their positions and velocities at various times, the potential values at these positions are directly estimated by using energy conservation arguments. The results agree very well with conventional probe based measurements. The technique is free of some of the inherent limitations of probe based diagnostics and offers a direct and minimally invasive means of visualizing potential profiles in a plasma.

physics.plasm-ph↗

arXiv2018

Micro-dynamics of neutral flow induced dusty plasma flow

We present a detailed experimental study of gas flow induced motion of dust particles in a DC glow discharge plasma. The characteristics of the dust dynamics are investigated as a function of the differential gas flow rate, the background neutral pressure, the dust particle size as well as the neutral species of the gas. The experiments have been carried out in the table top Dusty Plasma Experimental (DPEx) device in which a plasma is created between a disk shaped anode and a grounded cathode in a $Π$-shaped pyrex glass tube. The asymptotic steady state flow velocity of the injected micron sized dust particles is found to increase with an increase of neutral flow velocity and decrease with an increase in the background pressure. Furthermore, this velocity is seen to be independent of the size of the dust particles but decreases with an increase in the mass of the background gas. A simple theoretical model, based on estimates of the various forces acting on the dust particles, is used to elucidate the role of neutrals in the flow dynamics of the dust particles. Our experiments thus provide a detailed microscopic understanding of some of the past phenomenological observations of dust flows in the DPEx device and can prove useful in future experimental implementations of dust flow experiments.

physics.plasm-ph↗

arXiv2018

Fission fragment mass distribution in $^{210}$Po and $^{213}$At

Background: The influence of shell effect on the dynamics of the fusion fission process and it's evolution with excitation energy in the pre-actinide Hg-Pb region in general is a matter of intense research in recent years. In particular, a strong ambiguity remains for the neutron shell closed $^{210}$Po nucleus regarding the role of shell effect in fission around $\approx$ 30 - 40 MeV of excitation energy. Purpose: We have measured the fission fragment mass distribution of $^{210}$Po populated using fusion of $^{4}$He + $^{206}$Pb at different excitation energies and compare the result with recent theoretical predictions as well as with our previous measurement for the same nucleus populated through a different entrance channel. Mass distribution in the fission of the neighbouring nuclei $^{213}$At is also studied for comparison. Methods: Two large area Multi-wire Proportional Counters (MWPC) were used for complete kinematical measurement of the coincident fission fragments. The time of flight differences of the coincident fission fragments were used to directly extract the fission fragment mass distributions. Results: The measured fragment mass distribution for the reactions $^{4}$He + $^{206}$Pb and $^{4}$He + $^{209}$Bi were symmetric and the width of the mass distributions were found to increase monotonically with excitation energy above 36.7 MeV and 32.9 MeV, respectively, indicating the absence of shell effects at the saddle. However, in the fission of $^{210}$Po, we find minor deviation from symmetric mass distributions at the lowest excitation energy (30.8 MeV). Conclusion: Persistence of shell effect in fission fragment mass distribution of $^{210}$Po was observed at the excitation energy $\approx$ 31 MeV as predicted by the theory; at higher excitation energy, however, the present study reaffirms the absence of any shell correction in the fission of $^{210}$Po.

nucl-ex↗

arXiv2017

Interaction and propagation characteristics of two counter and co-propagating Mach cones in a dusty plasma

We theoretically investigate the interaction and propagation characteristics of two co/counter propagating Mach cones triggered by two projectile particles moving with supersonic velocities in the same/opposite directions through a dusty plasma medium. The Mach cone solutions are obtained by solving a model set of fluid equations for a heavily charged dust fluid that includes the contributions of the projectile particles in the Poisson equation. The density profiles and velocity vector maps of the Mach wings show interesting structural changes when they interact with each other and form patterns similar to interference fringes. Compared to the co-propagating Mach cones, the wings of counter propagating Mach cones produce a larger number of maxima and minima in the pattern resulting from their mutual interaction. In addition the time duration of the formation of two maxima or minima at a particular point decreases due to the interactions of Mach cones. Another notable feature is that the spacing between adjacent maxima increases while the fringe angle decreases with the increase of relative velocity of the counter propagating projectile particles.

physics.plasm-ph↗

arXiv2016

Fission fragment mass distributions in reactions populating 200Pb

The fission fragment mass distributions have been measured in the reactions 16O + 184W and 19F+ 181Ta populating the same compound nucleus 200Pb? at similar excitation energies. It is found that the widths of the mass distribution increases monotonically with excitation energy, indicating the absence of quasi-fission for both reactions. This is contrary to two recent claims of the presence of quasi-fission in the above mentioned reactions.

nucl-ex↗

arXiv2016

Flowing dusty plasma experiments: Generation of flow and measurement techniques

A variety of experimental techniques for the generation of subsonic/supersonic dust fluid flows and means of measuring such flow velocities are presented. The experiments have been carried out in a $Π-$shaped Dusty Plasma Experimental (DPEx) device with micron size kaolin/Melamine Formaldehyde (MF) particles embedded in a background of Argon plasma created by a direct current (DC) glow discharge. A stationary dust cloud is formed over the cathode region by precisely balancing the pumping speed and gas flow rate. A flow of dust particles/fluid is generated by additional gas injection from a single or dual locations or by altering the dust confining potential. The flow velocity is then estimated by three different techniques, namely, by super Particle Identification (sPIT) code, Particle Image Velocimetry (PIV) analysis and the excitation of Dust Acoustic Waves (DAWs). The results obtained from these three different techniques along with their merits and demerits are discussed. An estimation of the neutral drag force responsible for the generation as well as the attenuation of the dust fluid flow is made. These techniques can be usefully employed in laboratory devices to investigate linear and non-linear collective excitations in a flowing dusty plasma.

physics.plasm-ph↗

arXiv2016

Experimental investigation of flow induced dust acoustic shock waves in a complex plasma

We report on experimental observations of flow induced large amplitude dust-acoustic shock waves (DASW) in a complex plasma. The experiments have been carried out in a $Π$ shaped DC glow discharge experimental device using kaolin particles as the dust component in a background of Argon plasma. A strong supersonic flow of the dust fluid is induced by adjusting the pumping speed and neutral gas flow into the device. An isolated copper wire mounted on the cathode acts as a potential barrier to the flow of dust particles. A sudden change of gas flow rate is used to trigger the onset of high velocity dust acoustic shocks whose dynamics are captured by fast video pictures of the evolving structures. The physical characteristics of these shocks are delineated through a parametric scan of their dynamical properties over a range of flow speeds and potential hill heights. The observed evolution of the shock waves and their propagation characteristics are found to compare well with model numerical results based on a modified Korteweg-de-Vries-Burgers type equation.

physics.plasm-ph↗

arXiv2016

Experimental Study of Dust Acoustic Waves in the Strongly Correlated Regime

Low frequency dust acoustic waves (DAW) were excited in a laboratory argon dusty plasma by modulating the discharge voltage with a low frequency AC signal. Metallic graphite particles were used as dust grains and a digital FFT technique was used to obtain dispersion characteristics. The experimental dispersion relation shows the reduction of phase velocity and a regime where $\partial ω/\partial k < 0$. A comparison is made with existing theoretical model.

physics.plasm-ph↗

arXiv2016

Experimental observation of strong coupling effects on the dispersion of dust acoustic waves in a plasma

The dispersion properties of low frequency dust acoustic waves in the strong coupling regime are investigated experimentally in an argon plasma embedded with a mixture of kaolin and $MnO_2$ dust particles. The neutral pressure is varied over a wide range to change the collisional properties of the dusty plasma. In the low collisional regime the turnover of the dispersion curve at higher wave numbers and the resultant region of $\partialω/\partial k < 0$ are identified as signatures of dust-dust correlations. In the high collisional regime dust neutral collisions produce a similar effect and prevent an unambiguous identification of strong coupling effects.

physics.plasm-ph↗

arXiv2016

Visco-elastic effects in strongly coupled dusty plasmas

We report on experimental evidence of visco-elastic effects in a strongly coupled dusty plasma through investigations of the propagation characteristics of low frequency dust acoustic waves and by excitations of transverse shear waves in a DC discharge Argon plasma.

physics.plasm-ph↗

arXiv2016

Theoretical study of head-on collision of dust acoustic solitary waves in a strongly coupled complex plasma

We investigate the propagation characteristics of two counter propagating dust acoustic solitary waves (DASWs) undergoing a head-on collision, in the presence of strong coupling between micron sized charged dust particles in a complex plasma. A coupled set of nonlinear dynamical equations describing the evolution of the two DASWs using the extended Poincaré-Lighthill-Kuo perturbation technique is derived. The nature and extent of post collision phase-shifts of these solitary waves are studied over a wide range of dusty plasma parameters in a strongly and a weakly coupled medium. We find a significant change in the nature and amount of phase delay in the strongly coupled regime as compared to a weakly coupled regime. The phase shift is seen to change its sign beyond a threshold value of compressibility of the medium for a given set of dusty plasma parameters.

physics.plasm-ph↗

arXiv2016

Experimental observation of precursor solitons in a flowing complex plasma

The excitation of precursor solitons ahead of a rapidly moving object in a fluid, a spectacular phenomenon in hydrodynamics that has often been observed ahead of moving ships, has surprisingly not been investigated in plasmas where the fluid model holds good for low frequency excitations such as ion acoustic waves. In this paper we report the first experimental observation of precursor solitons in a flowing dusty plasma. The nonlinear solitary dust acoustic waves (DAWs) are excited by a supersonic mass flow of the dust particles over an electrostatic potential hill. In a frame where the fluid is stationary and the hill is moving the solitons propagate in the upstream direction as precursors while wake structures consisting of linear DAWs are seen to propagate in the downstream region. A theoretical explanation of these excitations based on the forced Korteweg-deVries model equation is provided and their practical implications in situations involving a charged object moving in a plasma are discussed.

physics.plasm-ph↗

arXiv2015

Dusty Plasma Experimental (DPEx) device for complex plasma experiments with flow

A versatile table-top dusty plasma experimental (DPEx) device to study flow induced excitations of linear and nonlinear waves/structures in a complex plasma is presented. In this {$Π$}-shaped apparatus a DC glow discharge plasma is produced between a disc shaped anode and a grounded long cathode {tray} by applying a high voltage DC in the background of a neutral gas {(Argon)} and subsequently a dusty plasma is created by introducing micron sized dust particles that get charged and levitated in the sheath region. A flow of the dust particles is induced in a controlled manner by adjusting the pumping speed and the gas flow rate into the device. A full characterisation of the plasma, using Langmuir and emissive probe data, and that of the dusty plasma using particle tracking data with the help of an idl based (super) Particle Identification and Tracking (sPIT) code is reported. Experimental results on the variation of the dust flow velocity as a function of the neutral pressure and the gas flow rate are given. {The neutral drag force acting on the particles and the Epstein coefficient are estimated from the initial acceleration of the particles}. The potential experimental capabilities of the device for conducting fundamental studies of flow induced instabilities are discussed.

physics.plasm-ph↗

arXiv2014

Chimera states in a population of identical oscillators under planar cross-coupling

We report the existence of a chimera state in an assembly of identical nonlinear oscillators that are globally linked to each other in a simple planar cross-coupled form. The rotational symmetry breaking of the coupling term appears to be responsible for the emergence of these collective states that display a characteristic coexistence of coherent and incoherent behaviour. Our finding, seen in both a collection of van der Pol oscillators and chaotic Rossler oscillators, further simplifies the existence criterion for chimeras and thereby broadens the range of their applicability to real world situations.

nlin.CD↗