SearcharxivSearch

arXiv subjects

Adam Umra

Publications and source records attributed to Adam Umra.

9 recordsLinked to original sources

Self-Supervised Noise2Noise-Enhanced Denoising for Continuous-Scan Air-Plasma THz Spectroscopy

Terahertz time-domain spectroscopy (THz-TDS) based on air-plasma generation and balanced air-biased coherent detection offers gap-free broadband coverage, but individual continuous-scan traces are strongly affected by pulse-to-pulse fluctuations and electronic noise. Reaching a useful signal-to-noise ratio therefore requires averaging multiple traces, which directly increases measurement time. We propose a learned denoising approach that recovers high-quality THz waveforms from as few as one complete continuous delay sweep, referred to here as a single-scan trace. A compact one-dimensional residual U-Net is trained using two complementary strategies: a reference-supervised baseline that maps individual noisy traces to long-average reference waveforms, and a Noise2Noise approach that learns from pairs of independently acquired noisy traces without requiring a clean training target. Averaging the predictions of both models reduces systematic bias and yields a trace-reduction factor of approximately $5.4\times$ at $K=1$, meaning that one denoised trace achieves the reconstruction accuracy of averaging approximately five raw traces. The Noise2Noise model alone achieves $4.9\times$, outperforming both the reference-supervised baseline ($4.6\times$) and classical Wiener filtering ($3.2\times$). These results show that self-supervised learning from repeated noisy measurements can support faster continuous-scan THz-TDS without hardware modification.

eess.SP

Design and Practical Validation of a Novel Modulation Scheme for RIS Detection and Identification

The reconfigurable intelligent surfaces detection and identification (RISs-ID) is a critical process that enables a base station (BS) to adaptively assign the appropriate RIS to a given \ac{UE}. This work proposes a novel modulation scheme to enhance the reliability of RIS-ID by reducing the miss-detection ($P_\text{m}$) and false-alarm ($P_\text{f}$) probabilities. Specifically, we leverage the RIS's passive beamforming gain to enable over-the-air modulation of the RIS ID, combined with passive beam sweeping to extend detection coverage in angular space. Prototype experiments demonstrate the effectiveness of the proposed scheme in reducing $P_\text{m}$ and $P_\text{f}$ to $10^{-3}$ across different operating points.

eess.SP

Measurement-Based Validation of Geometry-Driven RIS Beam Steering in Industrial Environments

Reconfigurable intelligent surfaces (RISs) offer programmable control of radio propagation for future wireless systems. For configuration, geometry-driven analytical approaches are appealing for their simplicity and real-time operation, but their performance in challenging environments such as industrial halls with dense multipath and metallic scattering is not well established. To this end, we present a measurement-based evaluation of geometry-driven RIS beam steering in a large industrial hall using a 5 GHz RIS prototype. A novel RIS configuration is proposed in which four patch antennas are mounted in close proximity in front of the RIS to steer the incident field and enable controlled reflection. For this setup, analytically computed, quantized configurations are implemented. Two-dimensional received power maps from two measurement areas reveal consistent, spatially selective focusing. Configurations optimized near the receiver produce clear power maxima, while steering to offset locations triggers a rapid 20-30 dB reduction. With increasing RIS-receiver distance, elevation selectivity broadens due to finite-aperture and geometric constraints, while azimuth steering remains robust. These results confirm the practical viability of geometry-driven RIS beam steering in industrial environments and support its use for spatial field control and localization under non-ideal propagation.

eess.SP

RL-Aided Cognitive ISAC: Robust Detection and Sensing-Communication Trade-offs

This paper proposes a reinforcement learning (RL)-aided cognitive framework for massive MIMO-based integrated sensing and communication (ISAC) systems employing a uniform planar array (UPA). The focus is on enhancing radar sensing performance in environments with unknown and dynamic disturbance characteristics. A Wald-type detector is employed for robust target detection under non-Gaussian clutter, while a SARSA-based RL algorithm enables adaptive estimation of target positions without prior environmental knowledge. Based on the RL-derived sensing information, a joint waveform optimization strategy is formulated to balance radar sensing accuracy and downlink communication throughput. The resulting design provides an adaptive trade-off between detection performance and achievable sum rate through an analytically derived closed-form solution. Monte Carlo simulations demonstrate that the proposed cognitive ISAC framework achieves significantly improved detection probability compared to orthogonal and non-learning adaptive baselines, while maintaining competitive communication performance. These results underline the potential of RL-assisted sensing for robust and spectrum-efficient ISAC in next-generation wireless networks.

eess.SP

Short Blocks, Fast Sensing: Finite Blocklength Tradeoffs in RIS-Assisted ISAC

Integrated sensing and communication (ISAC) is a cornerstone for future sixth-generation (6G) networks, enabling simultaneous connectivity and environmental awareness. However, practical realization faces significant challenges, including residual self-interference (SI) in full-duplex systems and performance degradation of short-packet transmissions under finite blocklength (FBL) constraints. This work studies a reconfigurable intelligent surface (RIS)-assisted full-duplex ISAC system serving multiple downlink users while tracking a moving target, explicitly accounting for SI and FBL effects in both communication and sensing. We formulate an optimization framework to minimize service adaptation gaps while ensuring sensing reliability, solved via alternating optimization and successive convex approximation. Numerical results show that short blocklengths enable fast adaptation but raise radar outage from fewer pulses and motion sensitivity. Longer blocklengths improve signal-to-interference-plus-noise ratio (SINR) and reduce outages but allow motion to degrade sensing. A "sweet spot" arises where blocklength and beamformer allocation optimize throughput and sensing, seen as a local minimum in radar SINR variance. RIS-assisted optimization identifies this balance, achieving reliable communication and radar sensing jointly.

eess.SP

Hardware-Efficient Cognitive Radar: Multi-Target Detection with RL-Driven Transmissive RIS

Cognitive radar has emerged as a key paradigm for next-generation sensing, enabling adaptive, intelligent operation in dynamic and complex environments. Yet, conventional cognitive multiple-input multiple-output (MIMO) radars offer strong detection performance but suffer from high hardware complexity and power demands. To overcome these limitations, we develop a reinforcement learning (RL)-based framework that leverages a transmissive reconfigurable intelligent surface (TRIS) for adaptive beamforming. A state-action-reward-state-action (SARSA) agent tunes TRIS phase shifts to improve multi-target detection in low signal-to-noise ratio (SNR) conditions while operating with far fewer radio frequency (RF) chains. Simulations confirm that the proposed TRIS-RL radar matches or, for large number of elements, even surpasses MIMO performance with reduced cost and energy requirements.

eess.SP

Towards Smarter Sensing: 2D Clutter Mitigation in RL-Driven Cognitive MIMO Radar

Motivated by the growing interest in integrated sensing and communication for 6th generation (6G) networks, this paper presents a cognitive Multiple-Input Multiple-Output (MIMO) radar system enhanced by reinforcement learning (RL) for robust multitarget detection in dynamic environments. The system employs a planar array configuration and adapts its transmitted waveforms and beamforming patterns to optimize detection performance in the presence of unknown two-dimensional (2D) disturbances. A robust Wald-type detector is integrated with a SARSA-based RL algorithm, enabling the radar to learn and adapt to complex clutter environments modeled by a 2D autoregressive process. Simulation results demonstrate significant improvements in detection probability compared to omnidirectional methods, particularly for low Signal-to-Noise Ratio (SNR) targets masked by clutter.

eess.SP

Robust Communication Design in RIS-Assisted THz Channels

Terahertz (THz) communication offers the necessary bandwidth to meet the high data rate demands of next-generation wireless systems. However, it faces significant challenges, including severe path loss, dynamic blockages, and beam misalignment, which jeopardize communication reliability. Given that many 6G use cases require both high data rates and strong reliability, robust transmission schemes that achieve high throughput under these challenging conditions are essential for the effective use of high-frequency bands. In this context, we propose a novel mixed-criticality superposition coding scheme for reconfigurable intelligent surface (RIS)-assisted THz systems. This scheme leverages both the strong but intermittent direct line-of-sight link and the more reliable, yet weaker, RIS path to ensure robust delivery of high-criticality data while maintaining high overall throughput. We model a mixed-criticality queuing system and optimize transmit power to meet reliability and queue stability constraints. Simulation results show that our approach significantly reduces queuing delays for critical data while sustaining high overall throughput, outperforming conventional time-sharing methods. Additionally, we examine the impact of blockage, beam misalignment, and beamwidth adaptation on system performance. These results demonstrate that our scheme effectively balances reliability and throughput under challenging conditions, while also underscoring the need for robust beamforming techniques to mitigate the impact of misalignment in RIS-assisted channels.

cs.IT

Intermittency versus Path Loss in RIS-aided THz Communication: A Data Significance Approach

The transition to Terahertz (THz) frequencies, providing an ultra-wide bandwidth, is a key driver for future wireless communication networks. However, the specific properties of the THz channel, such as severe path loss and vulnerability to blockage, pose a significant challenge in balancing data rate and reliability. This work considers reconfigurable intelligent surface (RIS)-aided THz communication, where the effective exploitation of a strong, but intermittent line-of-sight (LOS) path versus a reliable, yet weaker RIS-path is studied. We introduce a mixed-criticality superposition coding scheme that addresses this tradeoff from a data significance perspective. The results show that the proposed scheme enables reliable transmission for a portion of high-criticality data without significantly impacting the overall achievable sum rate and queuing delay. Additionally, we gain insights into how the LOS blockage probability and the channel gain of the RIS-link influence the rate performance of our scheme.

cs.IT