arXiv subjects

Adrienn Ruzsinszky

Publications and source records attributed to Adrienn Ruzsinszky.

At least 37 records · Page 2Linked to original sources

arXiv2022

Controllable optical and magneto-optical properties of magnetic CrI3 nanoribbons

A monolayer of CrI3 has an amazing ferromagnetic ground-state. In this work, we calculate band structures and magnetic moments of tensile-strained and bent zigzag CrI3 nanoribbons with density functional theory. The edge iodine atoms form flat low-lying conduction bands and couple with chromium atoms ferromagnetically, while the non-edge iodine atoms weakly couple antiferromagnetically. CrI3 nanoribbons have a nearly equal preference for the out-of-plane and in-plane magnetic moment configurations, slightly favoring the in-plane one. We also calculate optical absorption with many-body perturbation GW-BSE (Bethe-Salpeter equation) and investigate magneto-optical properties, including magnetic dichroism, Faraday and magneto-optical Kerr effects. The low-energy dark excitons are mainly from transitions between electrons and holes with unlike spins and are non-Frenkel-like, while the bright excitons have mixed spin configurations. Tensile strains and bending manifestly modulate the absorption spectra and magneto-optical properties of CrI3 nanoribbons within a technologically important photon energy-range of ~1.0-2.0 eV, suggesting a potential application in tunable magnetic optoelectronics.

cond-mat.mtrl-sci↗

arXiv2022

Spin-polarization anisotropy included by mechanical bending in tungsten diselenide nanoribbons and tunable excitonic states

A WSe$_2$ monolayer shows many interesting properties due to its spin-orbit coupling induced spin splitting in bands around the Fermi level and the spin-valley configuration. The orientation of the spin polarization in the relevant bands is crucial for the nature of exciton states and the optical valley selectivity. In this work, we studied the WSe$_2$ nanoribbons under different mechanical bending curvatures and electron/hole doping with density functional theory and their optical absorption and excitonic states with many-body perturbation GW and BSE (Bethe-Salpeter equation) methods. We found that the WSe$_2$ nanoribbons can exhibit an enhanced SOC effect and a spatially varying spin polarization in bands around the Fermi level under bending. The spin-polarization can show an anisotropy (or asymmetry) in those nearly degenerate bands, leading to a controllable magnetism via bending and electron/hole doping to the nanoribbons, suggesting a potential application in compact and controllable magnetic nanodevices and spintronics. The optical absorption spectrum of the nanoribbon presents a large tunability with bending within the near infrared region of about 0.4 to 1.5 eV, showing an enhanced absorption at a large bending condition. The exciton states generally show mixed or various spin configuration in the electron and hole pairs that are controlled by bending, potentially useful for applications in spin-based quantum information processes.

cond-mat.mtrl-sci↗

arXiv2021

Bending as a control knob for the electronic and optical properties of phosphorene nanoribbons

We have assessed mechanical bending as a powerful controlling tool for the electronic structure and optical properties of phosphorene nanoribbons. We use state-of-the-art density functional approximations in our work. The overall performance of the recently developed meta-generalized gradient approximation (meta-GGA) mTASK [Phys. Rev. Mater. \textbf{5}, 063803 (2021)] functional establishes the method as a useful alternative to the screened hybrid HSE06 for better band gaps of phosphorene nanoribbons. We present a detailed and novel analysis to interpret the optical absorption of bent phosphorene nanoribbons using the GW-Bethe-Salpeter approximation (GW-BSE). We demonstrate the important role of the unoccupied in-gap state and conclude that this in-gap state in armchair nanoribbons introduced by bending can significantly affect the properties of low-energy excitons, and add some useful opportunities for applications as optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2021

First-principles wavevector- and frequency-dependent exchange-correlation kernel for jellium at all densities

We propose a spatially and temporally nonlocal exchange-correlation (xc) kernel for the spin-unpolarized fluid phase of ground-state jellium, for use in time-dependent density functional and linear response calculations. The kernel is constructed to satisfy known properties of the exact xc kernel, to accurately describe the correlation energies of bulk jellium, and to satisfy frequency-moment sum rules at a wide range of bulk jellium densities, including those low densities that display strong correlation and symmetry breaking. These effects are easier to understand in the simple jellium model than in real systems. All exact constraints satisfied by the recent MCP07 kernel [A. Ruzsinszky, et al., Phys. Rev. B 101, 245135 (2020)] are maintained in the new revised MCP07 (rMCP07) kernel, while others are added. The revision $f_\mathrm{xc}^\mathrm{rMCP07}(q,ω)$ differs from MCP07 only for non-zero frequencies $ω$. Only at densities much lower than those of real bulk metals is the frequency dependence of the kernel important for the correlation energy of jellium. As the wavevector $q$ tends to zero, the kernel has a $-4πα(ω)/q^2$ divergence whose frequency-dependent ultranonlocality coefficient $α(ω)$ vanishes in jellium, and is predicted by rMCP07 to be extremely small for the real metals Al and Na.}

cond-mat.mtrl-sci↗

arXiv2021

Progress towards understanding ultranonlocality through the wavevector and frequency dependence of approximate exchange-correlation kernels

In the framework of time-dependent density functional theory (TDDFT), the exact exchange-correlation (xc) kernel $f_{xc}(n,q,ω)$ determines the ground-state energy, excited-state energies, lifetimes, and the time-dependent linear density response of any many-electron system. The recently developed MCP07 xc kernel $f_{xc}(n,q,ω)$ of A. Ruzsinszky et al. [Phys. Rev. B 101, 245135 (2020)] yields excellent uniform electron gas (UEG) ground-state energies and plausible plasmon lifetimes. As MCP07 is constructed to describe $f_{xc}$ of the UEG, it cannot capture optical properties of real materials. To verify this claim, we follow Nazarov et al. [Phys. Rev. Lett. 102, 113001 (2009)] to construct the long-range, dynamic xc kernel, $\lim_{q\to 0}f_{xc}(n,q,ω) = -α(ω)e^2/q^2$, of a weakly inhomogeneous electron gas, using MCP07 and other common xc kernels. The strong wavevector and frequency dependence of the "ultranonlocality" coefficient $α(ω)$ is demonstrated for a variety of simple metals and semiconductors. We examine how imposing exact constraints on an approximate kernel shapes $α(ω)$. Comparisons to kernels derived from correlated-wavefunction calculations are drawn.

cond-mat.mtrl-sci↗

arXiv2021

Self-interaction corrected Kohn-Sham effective potentials using the density-consistent effective potential method

Density functional theory (DFT) and beyond-DFT methods are often used in combination with photoelectron spectroscopy to obtain physical insights into the electronic structure of molecules and solids. The Kohn-Sham eigenvalues are not electron removal energies except for the highest occupied orbital. The eigenvalues of the highest occupied molecular orbitals often underestimate the electron removal or ionization energies due to the self-interaction (SI) errors in approximate density functionals. In this work, we adapt and implement the density-consistent effective potential(DCEP) method of Kohut, Ryabinkin, and Staroverov to obtain SI corrected local effective potentials from the SI corrected Fermi-Löwdin orbitals and density in the FLOSIC scheme. The implementation is used to obtain the density of states (photoelectron spectra) and HOMO-LUMO gaps for a set of molecules and polyacenes. Good agreement with experimental values is obtained compared to a range of SI uncorrected density functional approximations.

physics.chem-ph↗

arXiv2021

Opening band gaps of low-dimensional materials at the meta-GGA level of density functional approximations

The recent TASK meta-GGA density functional [Phys. Rev. Research, 1, 033082 (2019)] is constructed with an enhanced nonlocality in the generalized Kohn-Sham scheme, and therefore harbors great opportunities for band gap prediction. Although this approximation was found to yield excellent band gaps of bulk solids, this accuracy cannot be straightforwardly transferred to low-dimensional materials. The reduced screening of these materials results in larger band gaps compared to their bulk counterparts, as an additional barrier to overcome. In this work, we demonstrate how the alteration of exact physical constraints in this functional affects the band gaps of monolayers and nanoribbons, and present accurate band gaps competing with the HSE06 approximation. In order to achieve this goal, we have modified the TASK functional (a) by changing the tight upper-bound for one or two-electron systems ($h_X^0$) from 1.174 to 1.29 (b) by changing the limit of interpolation function $f_X (α\rightarrow \infty$) of the TASK functional that interpolates the exchange enhancement factor $F_X (s,α)$ from $α=$ 0 to 1. The resulting modified TASK (mTASK) was tested for various materials from 3D to 2D to 1D (nanoribbons), and was compared with the results of the higher-level hybrid functional HSE06 or with the G$_0$W$_0$ approximation within many-body perturbation theory. We find that mTASK greatly improves the band gaps and band structures of 2D and 1D systems, without significantly affecting the accuracy of the original TASK for the bulk 3D materials, when compared to the PBE-GGA and SCAN meta-GGA. We further demonstrate the applicability of mTASK by assessing the band structures of TMD nanoribbons with respect to various bending curvatures.

cond-mat.mtrl-sci↗

arXiv2021

Exploring and enhancing the accuracy of interior-scaled Perdew-Zunger self-interaction correction

The Perdew-Zunger self-interaction correction(PZ-SIC) improves the performance of density functional approximations(DFAs) for the properties that involve significant self-interaction error(SIE), as in stretched bond situations, but overcorrects for equilibrium properties where SIE is insignificant. This overcorrection is often reduced by LSIC, local scaling of the PZ-SIC to the local spin density approximation(LSDA). Here we propose a new scaling factor to use in an LSIC-like approach that satisfies an additional important constraint: the correct coefficient of atomic number Z in the asymptotic expansion of the exchange-correlation(xc) energy for atoms. LSIC and LSIC+ are scaled by functions of the iso-orbital indicator zσ, which distinguishes one-electron regions from many-electron regions. LSIC+ applied to LSDA works better for many equilibrium properties than LSDA-LSIC and the Perdew, Burke, and Ernzerhof(PBE) generalized gradient approximation(GGA), and almost as well as the strongly constrained and appropriately normed(SCAN) meta-GGA. LSDA-LSIC and LSDA-LSIC+, however, both fail to predict interaction energies involving weaker bonds, in sharp contrast to their earlier successes. It is found that more than one set of localized SIC orbitals can yield a nearly degenerate energetic description of the same multiple covalent bond, suggesting that a consistent chemical interpretation of the localized orbitals requires a new way to choose their Fermi orbital descriptors. To make a locally scaled-down SIC to functionals beyond LSDA requires a gauge transformation of the functional's energy density. The resulting SCAN-sdSIC, evaluated on SCAN-SIC total and localized orbital densities, leads to an acceptable description of many equilibrium properties including the dissociation energies of weak bonds.

physics.chem-ph↗

arXiv2021

Resolving the structure-energy dilemma at organic-inorganic interfaces: Adsorption of benzene, thiophene, and xenon over coinage metal surfaces

Semilocal (SL) density functional approximations (DFAs) are widely applied but have limitations due to their inability to incorporate long-range van der Waals (vdW) interaction. Non-local functionals (vdW-DF, VV10, rVV10) or empirical methods (DFT+D, DFT+vdW, DFT+MBD) are used with SL-DFAs to account for such missing interaction. The physisorption of a molecule on the surface of the coinage metals (Cu, Ag, and Au) is a typical example of systems where vdW interaction is significant. However, it is difficult to find a general method that reasonably describes both adsorption energy and geometry of even the simple prototypes of cyclic and heterocyclic aromatic molecules like benzene (C6H6) and thiophene (C4H4S) respectively, with reasonable accuracy. In this work, we present an alternative scheme based on Zaremba-Kohn's theory, called DFT+vdW-dZK. We show that, unlike other popular methods, DFT+vdW-dZK and particularly SCAN+vdW-dZK gives an accurate description of the physisorption of a rare-gas atom (Xe) and two small albeit diverse prototype organic molecules on the (111) surfaces of the coinage metals.

cond-mat.mtrl-sci↗

arXiv2020

Formation energy puzzle in intermetallic alloys: Random phase approximation fails to predict accurate formation energies

We performed density functional calculations to estimate the formation energies of intermetallic alloys. We used two semilocal approximations, the generalized gradient approximation (GGA) by Perdew-Burke-Ernzerhof (PBE) and the strongly constrained and appropriately normed (SCAN) meta-GGA. In addition, we utilized two nonlocal DFT functionals, the hybrid HSE06, and the state-of-the-art random phase approximation (RPA). The nonlocal functionals such as HSE06 and RPA yield accurate formation energies of binary alloys with completely-filled d-band metals, where semilocal functionals underperform. The accuracy at the nonlocal functionals is greatly reduced when a partially-filled d-band metal is present in an alloy, while PBE-GGA outperforms in these cases. We show that the accurate prediction of formation energies by any DFT method depends on its ability to predict the accurate electronic properties, e.g., valence d-band contribution to the density of states (DOS). The SCAN meta-GGA often corrects the PBE-DOS, however, it does not provide accurate formation energies compared to PBE. This is assumed to be due to the lack of proper error cancellation that should be expected due to the similar bulk nature of both alloys and their constituents, which may improve with the modification of meta-GGA ingredients. RPA yields too negative formation energies of alloys with partially-filled d-band metals. RPA results can be corrected by restoring the exchange-correlation kernel, thereby improving the short-range electron-electron correlation in metallic densities.

cond-mat.mtrl-sci↗

arXiv2020

The Fermi-Löwdin self-interaction correction for ionization energies of organic molecules

(Semi)-local density functional approximations (DFAs) suffer from self-interaction error (SIE). When the first ionization energy (IE) is computed as the negative of the highest-occupied orbital (HO) eigenvalue, DFAs notoriously underestimate them compared to quasi-particle calculations. The inaccuracy for the HO is attributed to SIE inherent in DFAs. We assessed the IE based on Perdew-Zunger self-interaction corrections on 14 small to moderate-sized organic molecules relevant in organic electronics and polymer donor materials. Though self-interaction corrected DFAs were found to significantly improve the IE relative to the uncorrected DFAs, they overestimate. However, when the self-interaction correction is interiorly scaled using a function of the iso-orbital indicator zσ, only the regions where SIE is significant get a correction. We discuss these approaches and show how these methods significantly improve the description of the HO eigenvalue for the organic molecules.

physics.chem-ph↗

arXiv2020

Interpretations of ground-state symmetry breaking and strong correlation in wavefunction and density functional theories

Strong correlations within a symmetry-unbroken ground-state wavefunction can show up in approximate density functional theory as symmetry-broken spin-densities or total densities, which are sometimes observable. They can arise from soft modes of fluctuations (sometimes collective excitations) such as spin-density or charge-density waves at non-zero wavevector. In this sense, an approximate density functional for exchange and correlation that breaks symmetry can be more revealing (albeit less accurate) than an exact functional that does not. The examples discussed here include the stretched H$_2$ molecule, antiferromagnetic solids, and the static charge-density wave/Wigner crystal phase of a low-density jellium. It is shown that (and in what sense) the static charge density wave is a soft plasmon.

cond-mat.str-el↗

arXiv2020

Constraint-based Wavevector- and Frequency-dependent Exchange-Correlation Kernel of the Uniform Electron Gas

According to time-dependent density functional theory, the exact exchange-correlation kernel f$_{xc}$(n, q, $ω$) determines not only the ground-state energy but also the excited-state energies/lifetimes and time-dependent linear density response of an electron gas of uniform density n $=$ 3/(4$π$r$^3_s$). Here we propose a parametrization of this function based upon the satisfaction of exact constraints. For the static ($ω$ = 0) limit, we modify the model of Constantin and Pitarke at small wavevector q to recover the known second-order gradient expansion, plus other changes. For all frequencies $ω$ at q $=$ 0, we use the model of Gross, Kohn, and Iwamoto. A Cauchy integral extends this model to complex $ω$ and implies the standard Kramers-Kronig relations. A scaling relation permits closed forms for not only the imaginary but also the real part of f$_{xc}$ for real $ω$. We then combine these ingredients by damping out the $ω$ dependence at large q in the same way that the q dependence is damped. Away from q $=$ 0 and $ω$ $=$ 0, the correlation contribution to the kernel becomes dominant over exchange, even at r$_s$ $=$ 4, the valence electron density of metallic sodium. The resulting correlation energy from integration over imaginary $ω$ is essentially exact. The plasmon pole of the density response function is found by analytic continuation of f$_{xc}$ to $ω$ just below the real axis, and the resulting plasmon lifetime first decreases from infinity and then increases as q grows from 0 toward the electron-hole continuum. A static charge-density wave is found for r$_s$ $>$ 69, and shown to be associated with softening of the plasmon mode. The exchange-only version of our static kernel confirms Overhauser's 1968 prediction that correlation enhances the charge-density wave.

physics.chem-ph↗

arXiv2020

Examining the order-of-limits problem and lattice constant performance of the Tao--Mo Functional

In their recent communication [Phys. Rev. Lett., 117, 073001 (2016)] Tao and Mo presented a semi-local density functional derived from the density matrix expansion of the exchange hole localised by a general coordinate transformation. We show that the order-of-limits problem present in the functional, dismissed as harmless in the original publication, causes severe errors in predicted phase transition pressures. We also show that the claim that lattice volume prediction accuracy exceeds that of existing similar functionals was based on comparison to reference data that misses anharmonic zero-point expansion and consequently overestimates accuracy. By highlighting these omissions, we give a more accurate assessment of the Tao-Mo functional and show a simple route to resolving the problems.

physics.chem-ph↗

arXiv2020

Understanding plasmon dispersion in nearly-free-electron metals: the relevance of exact constraints for novel exchange-correlation kernels within time-dependent density functional theory

Small-wavevector excitations in Coulomb-interacting systems can be decomposed into the high-energy collective longitudinal plasmon and the low-energy single-electron excitations. At the critical wavevector and corresponding frequency where the plasmon branch merges with the single-electron excitation region, the collective energy of the plasmon dissipates into single electron-hole excitations. The jellium model provides a reasonable description of the electron-energy-loss spectrum (EELS) of metals close to the free-electron limit. The random phase approximation (RPA) is exact in the high-density limit but can capture the plasmonic dispersion reasonably even for densities with rs > 1. RPA and all beyond-RPA methods investigated here, result in a wrong infinite plasmon lifetime for a wavevector smaller than the critical one where the plasmon dispersion curve runs into particle-hole excitations. Exchange-correlation kernel corrections to RPA modify the plasmon dispersion curve. There is however a large difference in the construction and form of the kernels investigated earlier. Our current work introduces recent model exchange-only and exchange-correlation kernels and discusses the relevance of some exact constraints in the construction of the kernel. We show that, because the plasmon dispersion samples a range of wavevectors smaller than the range sampled by the correlation energy, different kernels can make a strong difference for the correlation energy and a weak difference for the plasmon dispersion. This work completes our understanding about the plasmon dispersion in realistic metals, such as Cs, where a negative plasmon dispersion has been observed. We find only positive plasmon dispersion in jellium at the density for Cs.

cond-mat.mes-hall↗

arXiv2019

Revealing the role of van der Waals interactions in thiophene adsorption on copper surfaces

Accurate modeling of electronic and structural properties of organic molecule-metal interfaces are challenging problems because of the complicated electronic distribution of molecule and screening of charges at the metallic surface. This is also the reason why the organic/inorganic system can be engineered for several applications by fine-tuning the metallic work function. Here, we use density-functional theory (DFT) calculations with different level of functional approximations for a systematic study of thiophene interacting with Copper surfaces. In particular, we considered adsorbed structures with the thiophene molecule seated on the top site, with the S atom of the molecule located on the top of a Cu atom. In this work, we find that the weak chemisorption hypothesis of thiophene binding on the copper surface is well justified by the two meta-GGAs-based approximations, SCAN and SCAN+rVV10. PBE-GGA and TM meta-GGA describe it as a physisorption phenomenon by significantly underestimating the adsorption energies. Calculated adsorption energy curves reveal that non-local dispersion interaction between the molecule and metallic surface predominantly controls the bonding mechanism and thus, modifies the copper's work function. Our results imply that semi-local functionals without any kind of van der Waals (vdW) correction can often misinterpret this as physisorption, while, a fortuitous error cancellation can give a right description of this adsorption picture for a wrong reason as in the case of SCAN. The calculated density of states of the adsorbed molecule shows that the long-range vdW correction of SCAN+rVV10 causes more than enough hybridization between the \textit{p} orbitals of S atom and the copper \textit{d}-bands and therefore overestimates the adsorption energies by an average of 16\%.

cond-mat.mtrl-sci↗

arXiv2019

Accurate ground state- and quasiparticle energies: beyond the RPA and GW methods with adiabatic exchange-correlation kernels

We review the theory and application of adiabatic exchange-correlation (xc-) kernels for ab initio calculations of ground state energies and quasiparticle excitations within the frameworks of the adiabatic connection fluctuation dissipation theorem and Hedin's equations, respectively. Various different xc-kernels, which are all rooted in the homogeneous electron gas, are introduced but hereafter we focus on the specific class of renormalized adiabatic kernels, in particular the rALDA and rAPBE. The kernels drastically improve the description of short-range correlations as compared to the random phase approximation (RPA), resulting in significantly better correlation energies. This effect greatly reduces the reliance on error cancellations, which is essential in RPA, and systematically improves covalent bond energies while preserving the good performance of the RPA for dispersive interactions. For quasiparticle energies, the xc-kernels account for vertex corrections that are missing in the GW self-energy. In this context, we show that the short-range correlations mainly correct the absolute band positions while the band gap is less affected in agreement with the known good performance of GW for the latter. The renormalized xc-kernels offer a rigorous extension of the RPA and GW methods with clear improvements in terms of accuracy at little extra computational cost.

cond-mat.mtrl-sci↗

arXiv2019

First-principles study of mechanical and electronic properties of bent monolayer transition metal dichalcogenides

The mechanical and electronic properties of transition metal dichalcogenide (TMD) monolayers corresponding to transition groups IV, VI, and X are explored under mechanical bending from first principles calculations using the strongly constrained and appropriately normed (SCAN) meta-GGA (MGGA). SCAN provides an accurate description of the phase stability of the TMD monolayers. Our calculated lattice parameters and other structural parameters agree well with experiment. We find that bending stiffness (or flexural rigidity) increases as the transition metal group goes from IV to X to VI, with the exception of PdTe$_2$. Variation in mechanical properties (local strain, physical thickness) and electronic properties (local charge density, band structure) with bending curvature is discussed. The local strain profile of these TMD monolayers under mechanical bending is highly non-uniform. The mechanical bending tunes not only the thickness of the TMD monolayers but also the local charge distribution as well as the band structures, adding more functionalization options to these materials.

cond-mat.mtrl-sci↗