arXiv subjects

Akihiro Minamino

Publications and source records attributed to Akihiro Minamino.

5 recordsLinked to original sources

arXiv2026

First measurement of flux of the neutron background induced by accelerated neutrinos at the J-PARC facility

This article reports the measurement of the neutron background flux accidentally induced by the neutrino beam at the J-PARC facility in Japan. In particular, neutrino-nucleus neutral-current quasi-elastic (NCQE) scattering events, $ν~(\barν)+\rm{N}\toν~(\barν)+\rm{N'}$, can be obscured by a massive background of neutron-nucleus scattering events. The neutrons are produced within the materials (such as sand and concrete) located between the beam dump and the experimental area where the detectors are placed. We measured the accidental neutron events at the J-PARC neutrino facility using BGO and liquid scintillation detectors, with a plastic scintillation detector serving as an active veto counter. Based on a neutrino-mode data set of $2.972 \times 10^{20}$ POT, we observed 88 neutron-induced recoil proton events within an electron-equivalent recoil energy range of 0.98-11.60 $\rm MeV_{ee}$, selected via pulse-shape discrimination in the liquid scintillation detector. Accounting for the detection efficiency and resolution, and through comparison with simulations, the neutron flux was determined to be$[1.45^{+0.22}_{-0.24}~\rm{(stat.)} \pm 0.55~\rm{(sys.)}] \times 10^{-7}~\rm{cm}^{-2} \rm{s}^{-1}\rm{POT}^{-1}$,assuming an exponential neutron energy spectrum. This result will contribute to the evaluation of neutron backgrounds for neutrino experiments at the J-PARC facility.

physics.ins-det↗

arXiv2023

High-pressure xenon gas time projection chamber with scalable design and its performance at around the Q value of $^{136}$Xe double-beta decay

We have been developing a high-pressure xenon gas time projection chamber (TPC) to search for neutrinoless double beta ($0νββ$) decay of $^{136}$Xe. The unique feature of this TPC is in the detection part of ionization electrons, called ELCC. ELCC is composed of multiple units, and one unit covers 48.5 $\mathrm{cm}^2$. A 180 L size prototype detector with 12 units, 672 channels, of ELCC was constructed and operated with 7.6 bar natural xenon gas to evaluate the performance of the detector at around the Q value of $^{136}$Xe $0νββ$. The obtained FWHM energy resolution is (0.73 $\pm$ 0.11) % at 1836 keV. This corresponds to (0.60 $\pm$ 0.03) % to (0.70 $\pm$ 0.21) % of energy resolution at the Q value of $^{136}Xe$ $0νββ$. This result shows the scalability of the AXEL detector with ELCC while maintaining high energy resolution. Factors determining the energy resolution were quantitatively evaluated and the result indicates further improvement is feasible. Reconstructed track images show distinctive structures at the endpoint of electron tracks, which will be an important feature to distinguish $0νββ$ signals from gamma-ray backgrounds.

physics.ins-det↗

arXiv2023

Analyzing the neutron and $γ$-ray emission properties of an americium-beryllium tagged neutron source

Americium-beryllium (AmBe), a well-known tagged neutron source, is commonly used for evaluating the neutron detection efficiency of detectors used in ultralow background particle physics experiments, such as reactor neutrino and diffuse supernova neutrino background experiments. In particular, AmBe sources are used to calibrate neutron tagging by selecting the 4438-keV $γ$-ray signal, which is simultaneously emitted with a neutron signal. Therefore, analyzing the neutron and $γ$-ray emission properties of AmBe sources is crucial. In this study, we used the theoretical shape of a neutron energy spectrum, which was divided into three parts, to develop models of the energy spectrum and verify the results using experimental data. We used an AmBe source to measure the energy spectra of simultaneously emitted neutrons and $γ$-rays and determine the emission ratio of the neutrons with and without $γ$-ray emission. The measured spectrum was consistent with that obtained from the simulated result, whereas the measured emission ratio was significantly different from the corresponding simulated result. Here, we also discuss the feasibility of determining the neutron emission rates from the spectra divided into three parts.

physics.ins-det↗

arXiv2023

A method to measure the quenching factor for recoil energy of oxygen in bismuth germanium oxide scintillators

Bismuth germanium oxide ($\rm Bi_{4} Ge_{3} O_{12}$, BGO) scintillation crystals are widely used as detectors in the fields of particle physics and astrophysics due to their high density, and thus higher efficiency for gamma-ray detection. Owing to their good chemical stability, they can be used in any environment. For rare-event searches, such as dark matter and coherent elastic neutrino-nucleus scattering, BGO crystals are essential to comprehend the response of nuclear recoil. In this study, we have analyzed the events of neutron elastic scattering with oxygen in BGO crystals. Then, we have measured the quenching factor for oxygen recoil energy in the BGO crystal as a function of recoil energy by using a monoenergetic neutron source.

physics.ins-det↗

arXiv2022

Design and performance of a scintillation tracker for track matching in nuclear-emulsion-based neutrino interaction measurement

Precise measurement of neutrino-nucleus interactions with an accelerator neutrino beam is highly important for current and future neutrino oscillation experiments. To measure muon-neutrino charged-current interactions with nuclear-emulsion-based hybrid detector, muon track matching among the detectors are essential. We describe the design and performance of a newly developed scintillation tracker for the muon track matching in the neutrino-nucleus interaction measurement with nuclear emulsion detectors. The muon tracks are reconstructed using the scintillation tracker and another detector called Baby MIND, then, they are matched with the tracks in nuclear emulsion detectors. The scintillation tracker consists of four layers of horizontally and vertically aligned scintillator bars, covering an area of $1\,\mathrm{m} \times 1\,\mathrm{m}$. In the layer, 24 mm-wide plastic scintillator bars are specially arranged with deliberate gaps between each other. By recognizing the hit pattern of the four layers, a precise positional resolution of 2.5 mm is achieved while keeping the number of readout channels as small as 256. The efficiency of the track matching is evaluated to be more than 97% for forward-going muons, and the positional and angular resolutions of the scintillation tracker are 2.5 mm and 20-40 mrad respectively. The results demonstrate the usefulness of the design of the scintillation tracker for the muon track matching in the nuclear-emulsion-based neutrino-nucleus interaction measurements.

physics.ins-det↗